Vista and EVR support (1 Viewer)

Status
Not open for further replies.

Gizzmo

Portal Pro
May 30, 2007
101
2
Munich
Home Country
Germany Germany
i checked the issue that no .ts files is playing anymore. It seems that it has
to do something with the actual snapshots ( since some days ).

If i go back to the RC1 MP installation without any snapshot all the ts files
play again. O.K. without EVR because it came with a snapshot ...

Oh i forgot to say that this is on my 32bit system on my 64bit system
i didn't check the newer snapshots ...

Hmm, testing around now i don't have the configuration option for
activating EVR :( Reinstalled RC1 and than the snapshot from
15.08.2007 ... wasn't in the newer snapshots ?
 

Eabin

Retired Team Member
  • Premium Supporter
  • September 18, 2006
    465
    43
    in recent SVNs (since 13.08.) there should be the current version of the dshowhelper.dll included. i think it does not have the dependency on msvcr80.dll. could you please try installing a current svn, and using the dll that comes with that. and as usual: if it does not work, please attach mediaportal.log and vmr9.log.

    the reason why you are not seeing the configuration options anymore is beyond me. i just installed todays svn, and everything seems to be fine. you should be able to enable evr in mediaportal.xml (look for "useevr" and set it to true)
     

    Gizzmo

    Portal Pro
    May 30, 2007
    101
    2
    Munich
    Home Country
    Germany Germany
    so i installed the MediaPortal-svn--08-17-2007--01-00-Rev15568 snapshot this morning on my 64bit VISTA
    system and the good news are that sometimes it works :)

    First of all without EVR all files work fine like they should ...

    With EVR enabled ( with this snapshot it is possible to activate it within setup ) i can play all my Premiere HD
    caps if i play them from the beginning. If i try to play from last state than the movie stutters and crahes after
    a certain time.

    With EVR enabled and trying to play my skyHD caps with a muxxed german audiotrack the movie stutters and
    crashes after a certain time with both play options ( from beginning and from last state ). If you wanna have
    a sample file i can upload you one ?

    I attached some logfiles ( one playing a premiere cap first from start than from the last state and one playing
    first a Premiere HD cap than a skyHD cap with muxxed audio ) ... but i still don't have a VMR9.log

    in one of these folder should it be, or am i missing something ?

    C:\ProgramData\Team MediaPortal\MediaPortal\Log
    C:\Users\All Users\Team MediaPortal\MediaPortal\Log
     

    Gizzmo

    Portal Pro
    May 30, 2007
    101
    2
    Munich
    Home Country
    Germany Germany
    and here is the infofile from dependencywalker with the dll from the snapshot ... still some errors !?
     

    Eabin

    Retired Team Member
  • Premium Supporter
  • September 18, 2006
    465
    43
    the vmr9.log still goes to "c:\Program Files\Team Mediaportal\Mediaportal\Log". if you don't have this folder, please create it.

    by "it crashes", do you mean like crashing the whole MP, or just stopping the current playback? are you using tsreader or the old tsfilesource? (see this thread for more information).

    some other things to check: do all these files run ok when played back with Mediaplayer? do you have the latest powerdvd patch? have you installed the current hotfixes for nvidia+evr ?

    yes, please upload some sample files.

    edit: one more thing: does it work any better on your 32-bit vista system?

    so, i had a look at your logfiles, and this part does seem a bit strange, though i cannot really tell you what it means. any developer around that can clarify this?

    2007-08-17 09:14:40.688532 [Info.][MPMain]: failed filter:MPV Decoder Filter not found
    2007-08-17 09:14:40.689508 [Info.][MPMain]: failed filter:MPA Decoder Filter not found
    2007-08-17 09:14:40.690485 [Info.][MPMain]: add filter:Default DirectSound Device to graph clock:True
    2007-08-17 09:14:40.690485 [Info.][MPMain]: DirectShowUtils: found renderer - Default DirectSound Device
    2007-08-17 09:14:40.692438 [Warn.][MPMain]: Reclock is installed - if this method fails, reinstall and regsvr32 /u reclock and then uninstall
    2007-08-17 09:14:40.694391 [Info.][MPMain]: DirectshowUtil. Failed to add filter:Default DirectSound Device to graph :Klasse nicht registriert (Ausnahme von HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)) mscorlib bei System.Runtime.InteropServices.Marshal.BindMoniker(IMoniker pmk, UInt32 grfOpt, Guid& iidResult, Object& ppvResult)
    bei System.Runtime.InteropServices.Marshal.BindToMoniker(String monikerName)
    bei DShowNET.Helper.DirectShowUtil.AddAudioRendererToGraph(IGraphBuilder graphBuilder, String strFilterName, Boolean setAsReferenceClock)
     

    Gizzmo

    Portal Pro
    May 30, 2007
    101
    2
    Munich
    Home Country
    Germany Germany
    i will have a look at the VMR9.log ... :)


    With crashing i mean complete MP no chance to close MP in any way, so i always
    lockout of windows because the START WIN icon is the only thing i can use ...
    I think i use tsfilesource i did only a normal RC1 installation and afterwards the
    newest snapshots and i don't use TVserver or somethingelse ... so i think it
    should be tsfilesource :confused:

    I am not sure with windows mediaplayer, will check it, but they play fine in
    PowerDVD Ultra. Newest PowerDVD Patch is installed but about the NVIDIA+
    EVR hotfixes i am not sure. I did only all updates which the VISTA updatecenter
    shows. Do you think i should install them :confused: and if yes wich one, every one ?


    I will take some smaller sample parts at beginning next week ...


    I have to get MP working correctly on my 32bit system. Some snapshots and
    testing before i think it worked better but i am not sure if i tested EVR. I will
    try to get MP working again and test it.
     

    Gizzmo

    Portal Pro
    May 30, 2007
    101
    2
    Munich
    Home Country
    Germany Germany
    i hope i can offer some sample files tomorrow, i had less time to test.

    Now i installed both nvidia + EVR hotfixes. No changes but i have to
    do more testing ...



    I have MP running on my 32bit VISTA system, but there MP crashes
    everytime i try to start a h264 tsfile if i have EVR enabled. If not
    it plays fine ... But i have to do also more testing and of course
    logfiles :D

    Especially the VMR9.log ... i created the mentioned folder but it seems
    that i don't get the log in there ...
     

    Gizzmo

    Portal Pro
    May 30, 2007
    101
    2
    Munich
    Home Country
    Germany Germany
    so i created the following folder but i still don't get a VMR9.log

    C:\Progam Files\Team Mediaportal\Mediaportal\Log

    But i had to creat the complete line because in the folder Program Files
    was nothing from Mediaportal ...

    aha, the log folder has to be in C:\Program Files (x86)\Team MediaPortal\MediaPortal\log

    And another problem in german VISTA the folder is named Programme ( x86 ) and not
    Program Files ( X 86 )

    so now i have a VMR9.log attached :)
     

    Gizzmo

    Portal Pro
    May 30, 2007
    101
    2
    Munich
    Home Country
    Germany Germany
    herre are the logfiles after playing such a skyHD tsfile ... with EVR
    - no crash but playing like a diashow it seems frame per frame ...
     

    Gizzmo

    Portal Pro
    May 30, 2007
    101
    2
    Munich
    Home Country
    Germany Germany
    @ Eabin,

    do you have me a link where i can upload 11 rar files with complete
    1 GB ? In there are two 500 MB tsfiles - one a Premiere HD and one
    a skyHD cab ...

    I found some fileupload sites but all are limited ... do you use usenet ?
     
    Status
    Not open for further replies.

    Users who are viewing this thread

    Similar threads

    I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC. TV Server development looks dead so I'm afraid you're going to have to figure that out by yourself if it's even possible.
    I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC. TV...
    Hi everyone, I've set up Mediaportal TV Server on a Windows 11 box, tuner deteced okay, scanned channels, can preview, all seems...
    Replies
    8
    Views
    1K
    I would have to know more details, and ultimately, I'll have to test it when I get my new display, but an AI answer I got (I don't trust AI and this may not be correct) was that HDR is encoded with the HEVC codec and I know MePo uses the HEVC codec to play 4K UHD Blue-ray discs. So, there is at least the possibility that it will work...
    I would have to know more details, and ultimately, I'll have to test it when I get my new display, but an AI answer I got (I don't...
    Does MePo 1 pass the HDR metadata, Dolby Vision, HDR10, etc., along to the display when playing 4K UHD Blu-ray discs? If not, are...
    Replies
    2
    Views
    1K
    MP1 MP2 TVGuide Users DE
    Greetings Fellow MP'rs. Does anyone out there use tvguide.com to access TV listings..? :unsure: If so, can you advise on how it is set up for use with MediaPortal..? I havebeen using Zap2XML / GraceNote but that just died (for me alone seemingly) and I am out of listings. :( Would appreciate any help - Thanks.
    Greetings Fellow MP'rs. Does anyone out there use tvguide.com to access TV listings..? :unsure: If so, can you advise on how it...
    Greetings Fellow MP'rs. Does anyone out there use tvguide.com to access TV listings..? :unsure: If so, can you advise on how it...
    Replies
    0
    Views
    760
    Greetings to all Denizens of the land of MediaPortal... It seems our Zap2XML/GraceNote access is broken again. I (as many others) have been using the latest NewZap2xml_6 and it has worked flawlessly. A few days ago it all died. I wonder if anyone is working a solution to save the masses. I am hoping the good citizen of past is...
    Greetings to all Denizens of the land of MediaPortal... It seems our Zap2XML/GraceNote access is broken again. I (as many others)...
    Greetings to all Denizens of the land of MediaPortal... It seems our Zap2XML/GraceNote access is broken again. I (as many others)...
    Replies
    0
    Views
    767
    I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ? MP(1) will only use LAV if you select "Internal DirectShow player" as music output, but then you lose gapless playback. If you you don't have multichannel music you can choose WASAPI as the output and set the number of speakers to stereo. I have...
    I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ? MP(1) will only use LAV if you select...
    Not sure if this a a bug/config/settings problem. I am running a media portal 2.5 server with 2.41 client but it seems I get the...
    Replies
    1
    Views
    654
    Top Bottom