This may not be what you want, but i have used ffdshow for some years now, and it works flawlessly, only thing for dts passthrough is to check the box under(i believe it was just..) 'Output'. I disable mixer since i want my receiver to do that job for me, i also don't want ffdshow to handle h.264/VC1 so that i do disable in ffdshow...
This may not be what you want, but i have used ffdshow for some years now, and it works flawlessly, only thing for dts passthrough...
I have some MKV's with DTS-Core sound in it.
The DTS-Core was extracted with EAC3TO.
The Video works fine with MPC-HC, sound over...
Hi,
I'm having too this problem of the DVD subtitles being far too small.
It's true that the subtitles of a DVD are bitmaps and can't be resized, but the thing is that if I put the DVD in a standalone player, then their size is OK. If a put the same DVD in the HTPC and play it with MP, the subtitles are tiny.
Do I have...
Hi,
I'm having too this problem of the DVD subtitles being far too small.
It's true that the subtitles of a DVD are bitmaps...
MediaPortal Version: 1.0 RC3
MediaPortal Skin: BlueTwo
Windows Version: TinyXP "Bare" SP3
CPU Type: AMD 2600+ (Downclockt to...
Ok, I just checked and I didn't have AAC enabled. Actually I am using SAF unlocked so I guess the installation of that took care of all necesary settings.
I also have PDVD 9 codecs and CoreAVC installed but after some testing I ended up with Microsoft DTV-DVD Video Decoder.
And the processor is stable around 10% load since GPU is...
Ok, I just checked and I didn't have AAC enabled. Actually I am using SAF unlocked so I guess the installation of that took care of...
MediaPortal Version: 1.1 Beta
MediaPortal Skin: Blue3Wide
Windows Version: Windows 7 Pro
CPU Type: AMD 4850e
HDD: 500GB WD
Memory...
should still work, you need to use a different audio decoder to the default mpa decoder. i would choose between ffdshow tryouts (latest stable build) or ac3filter. Probably choose ffdshow. if your gonna mess with your system then make a ghost image backup of your system drive using "hiren's bootcd" (with old version of acronis true...
should still work, you need to use a different audio decoder to the default mpa decoder. i would choose between ffdshow tryouts...
I am not sure if this has been covered elsewhere. If it has, I apologize. I searched the forums and could not find anything.
My...
hey thnx for the reply:thx:
Alright I will give the other version a go and otherwise will give up on this plugin. As I already had some difficulties with it in the past.
Murfix
edit:
I took another look at it and I found out that the videos where also not playing from www.uitzendinggemist.nl. So i figured I had to install the asf...
hey thnx for the reply:thx:
Alright I will give the other version a go and otherwise will give up on this plugin. As I already had...
hi evrybody,
I have a codec issue, my mp installation is working fine and all. I can also play all my videos and tv series just...
Hi all,
I have the problem that I can't save the position of the asf video that I have seen until now with Gom Media Player: when I open a very big asf, even if it is on the PC hard disk, it is like opening a buffer that prevent the vision from the point where i left the video.
With Avi or Mpg I haven't this problem; I don't see...
Hi all,
I have the problem that I can't save the position of the asf video that I have seen until now with Gom Media Player: when...
Hi all,
I have the problem that I can't save the position of the asf video that I have seen until now with Gom Media Player: when...
Done, as said in my last post. I did that before I even installed SAF. I didn't want any conflicts. :D
Done, as said in my last post. I did that before I even installed SAF. I didn't want any conflicts. :D
MediaPortal Version: 1.0.2
MediaPortal Skin: Streamed MP
Windows Version: Windows XP SP3
CPU Type: AMD Athlon 64 1.8 gigahertz...
Getting Audio Codec Error when trying to playback recorded TV.
It was working perfectly before.
MediaPortal Version: MediaPortal & TV-Server 1.0.2
MediaPortal Skin: Blue - Default
Windows Version: XP SP3
CPU Type: HP
HDD:
Memory: 1.5G
Motherboard: Athlon
Video Card: NVIDIA
Video Card Driver:
Sound Card...
Getting Audio Codec Error when trying to playback recorded TV.
It was working perfectly before.
MediaPortal Version...
Getting Audio Codec Error when trying to playback recorded TV.
It was working perfectly before.
MediaPortal Version...
probably a missing flv splitter.
try the search button, find:
https://forum.team-mediaportal.com/onlinevideos-244/codec-setup-get-all-online-videos-play-58837/
or
https://forum.team-mediaportal.com/codecs-external-players-55/saf-v4-00beta-standalone-filters-dxva-ready-mpeg2-h-264-vc-1-a-44614/
or...
probably a missing flv splitter.
try the search button, find...
MediaPortal Version: 1.0.0.0 RC4
MediaPortal Skin: Blue3wideRetro 1.0.0.0
Windows Version: Win XP SP3
CPU Type: intel Core 2 CPU...
I hope this is attached the right way now. Sorry first time dealing with logs. :)
I hope this is attached the right way now. Sorry first time dealing with logs. :)
Getting Audio Codec Error when trying to playback recorded TV.
It was working perfectly before.
MediaPortal Version...
Ok, I don't know why this would affect anything, but I installed the newest catalyst (9.10) and HDMI audio drivers tonight and tried again. It worked!
I got nothin'! lol
Ok, I don't know why this would affect anything, but I installed the newest catalyst (9.10) and HDMI audio drivers tonight and...
Even though I have ffdshow selected as the default audio decoder, it doesn't start. I downloaded graphedit and found the audio is...
I don't know if it will help, but if this is MP 1.0.2 you could try updating the mediainfo.dll to a later version (MP uses this to get info on the file before playing it) - get it from MediaInfo - Download
Tony
I don't know if it will help, but if this is MP 1.0.2 you could try updating the mediainfo.dll to a later version (MP uses this to...
Hello!
I have set up a htpc for my father who wants to play .mov files (m-jpeg encoded) which he recorded with his panasonic...
Hi there,
I have a problem with an avi file that I can't read with MediaPortal. This avi file is encoded with the video codec mpeg-4v (bvop) also called mpeg4 visual.
I can read this file only with VLC player that is fine but I would prefer read it with MediaPortal
Do you know which codec I need to read this file ? I tryed a...
Hi there,
I have a problem with an avi file that I can't read with MediaPortal. This avi file is encoded with the video codec...
Hi there,
I have a problem with an avi file that I can't read with MediaPortal. This avi file is encoded with the video codec...
solved
After some sleuthing, I figured it out.
I opened the videos in G Spot to check the audio format & it was AAC MP4A. I then went to videohelp.com, checked the codec tools & found that ffdshow supports AAC. So I went to configure ffdshow audio & found that it was disabled. Changing it to whatever the other option was (I can't...
solved
After some sleuthing, I figured it out.
I opened the videos in G Spot to check the audio format & it was AAC MP4A. I then...
I have a couple mp4 videos that have mp4a audio. In MediaPortal, the only audio that plays are the left & right front channels...
np, according to the forums there is a beta version that you can apply for that can work with h264.
np, according to the forums there is a beta version that you can apply for that can work with h264.
Hi
I have several h264 .ts files from HDTV. They are from the music channel, and I have been spliting music videos and...
I did some research on the forums, installed ffdshow codecs from Free-Codecs.com : Download FFDShow MPEG-4 Video Decoder 2009-10-22, FFDShow MPEG-4 Video Decoder 2009-10-22 and FFDShow MPEG-4 Video Decoder 2009-09-17 SSE : FFDSHOW is a DirectShow decoding filter
Made a MKV file from one of my DVDs using MakeMKV, put it in my Moving...
I did some research on the forums, installed ffdshow codecs from Free-Codecs.com : Download FFDShow MPEG-4 Video Decoder...
I did some research on the forums, installed ffdshow codecs from Free-Codecs.com : Download FFDShow MPEG-4 Video Decoder...
if you want to use reclock it can actually be used with latest SAF beta you will just need to edit the merits and remove the post processing, you may miss out on some features like 6ch AAC. And i don't think it is bad advice to try the interpolation on your built into your tv, the best advice then is for you to get a new tv then.
if you want to use reclock it can actually be used with latest SAF beta you will just need to edit the merits and remove the post...
I have a few questions about dynamic refresh rates. I hope this is the right place to ask. I have a Samsung LN46A650 screen and and...
Ohhh, codecs. Don't we just love them.:)
But seriously, merits is a good thing to learn about, it's not that hard. I'm using radlight filtermanager to control mine but there're also others out there.
Ohhh, codecs. Don't we just love them.:)
But seriously, merits is a good thing to learn about, it's not that hard. I'm using...
Im using MediaPortal V1.0.2 to play upscaled DVD isos and ffdshow without an issue.
I would prefer to convert my SD DVD isos...
Yes I had everything set up correctly. I later learned that the version of FFDShow I was using, 3094, was a Beta version and may not have been fully compatible with MP. I switched to an earlier release of FFDShow which managed to work fine. So I might suggest try one of the stable releases of FFDShow.
In the end I chucked it all away...
Yes I had everything set up correctly. I later learned that the version of FFDShow I was using, 3094, was a Beta version and may...
I'm giving this a go:
- FFDShow 3094 (03 Oct. 2009)
- MP 1.1 Beta 1 SVN 23831 (1.04.23831)
TV is unstable when switching to...
One option if your centre speaker isn't too deep is to put it behind the TV. I'm currently doing this in my bedroom (just got rid of a big cabinet prior to moving house) and the audio quality and volume are not suffering at all.
One option if your centre speaker isn't too deep is to put it behind the TV. I'm currently doing this in my bedroom (just got rid...
Hello,
I just mounted my flat screen PC. Put my L and R speakers on nice stands, but have no good place for the center speaker...
What codec's do you use?
Do you do anything at the time the problem starts or prior to it?
Have you tested playback of these files with MPC-HC player outside of MP, does it do the same?
Is your problem similar to this one?
In order for people to help, we need a better picture of your current situation/installation, codec's...
What codec's do you use?
Do you do anything at the time the problem starts or prior to it?
Have you tested playback of these...
I have a problem with my Media Portal.
Everything works fine at the beginning, but with some time has passed the text in My Video...
Yeh im on the latest now. Originally i thought that just ticking the box in the MP settings should do it. But after reading so many people use the MP Post Processing AC3Filter to do it, ive just accepted that it IS normal what i have to do :)
Thanks all tho!
D.
Yeh im on the latest now. Originally i thought that just ticking the box in the MP settings should do it. But after reading so...
Hi All,
Ok ive done a fair bit of reading on this and cant find someone saying the same thing. Basically I can only get digital...
This is just out of nowhere: Maybe PowerDVD is able to play the BluRay Audio Stream as it is but MP isnt?
This is just out of nowhere: Maybe PowerDVD is able to play the BluRay Audio Stream as it is but MP isnt?
TV-Server Version:
MediaPortal Version: 1.0.2
MediaPortal Skin: BleazleWide V7.1.0
Windows Version: XP SP3
CPU Type: Intel...
I'm using the version of the PDVD9 codec installed by the freely available "HD Pack 2" package. No need to buy a full version of PDVD9 - in fact you don't even need the trial version, the HD Pack just installs the codec.
There is also apparently a way to make the free PDVD9 codec visible in MP by manually registering the dll, but...
I'm using the version of the PDVD9 codec installed by the freely available "HD Pack 2" package. No need to buy a full version of...
Hi,
Any users from the UK watching BBC HD?
I'm using the CoreAVC 1.9.5 codec and can't seem to get it working in Vista with...
Nope. MediaPortal use the Haali Media Splitter to (as the name suggests) split the files so it can handle all tracks inside the container (in your case AVI). Without that checkbox enabled it won't be able to handle the audio tracks seperatly.
MediaPortal is nothing else than a frontend, MP itself contains no codecs, afaik...
Nope. MediaPortal use the Haali Media Splitter to (as the name suggests) split the files so it can handle all tracks inside the...
I'm having trouble switching audio tracks in the latest build of MediaPortal. Both audio tracks play in the .AVI file.
I've read...
Can anyone help me with the error's below in the log.
Trying to play streamed MOV from apple trailers. Not sure waht a 'VMR9 pin error' is or what could cause it. All MOV files (streamed or local) play just fine in windows. What does VMR Pin Not connected mean?
9-10-08 22:18:51.859375 [Debug][MPMain]: ShowTimes...
Can anyone help me with the error's below in the log.
Trying to play streamed MOV from apple trailers. Not sure waht a 'VMR9...
Can anyone help me with the error's below in the log.
Trying to play streamed MOV from apple trailers. Not sure waht a 'VMR9...
Help please!!! :(
Help please!!! :(
Hi, I´d like to know if I use an external player like Kmplayer, the automatic refresh rate changer works? or only works if I use...
Great.
And great that you provided feedback!
:thx:
Great.
And great that you provided feedback!
:thx:
MediaPortal Version: 1.1 BETA
MediaPortal Skin: Blue3Wide
Windows Version: Win7 pro
CPU Type: amd 4850e
HDD: wd5000avvs...
Thanks for the reply. :)
I installed the latest SAF where AC3 filter is included and now it works. Whenever I start the PC with projector and toslink connected I get DTS or Dolby Digital to the reciver. When I use the HDMI and my LCD I get 2.0 audio out. Without having to reconfigure the settings in FFDshow or AC3 filter.
So, right...
Thanks for the reply. :)
I installed the latest SAF where AC3 filter is included and now it works. Whenever I start the PC with...
Hello community,
Until recently I used AC3Filter which passed on AC3 and DTS streams to my receiver just fine, and when hooked...
I use an Hauppauge HVR-1100 (94xx) TV card for analog TV with the Mainconcept MPEG2 Encoder bundle with WinTV ( Hauppauge TV software)
I've got a poor image quality when watching sport.
I would like to use the mpeg 2 Encoder settings in the TV server configuration software but the 2 tabs (quality settings and encoder setting) are...
I use an Hauppauge HVR-1100 (94xx) TV card for analog TV with the Mainconcept MPEG2 Encoder bundle with WinTV ( Hauppauge TV...
I use an Hauppauge HVR-1100 (94xx) TV card for analog TV with the Mainconcept MPEG2 Encoder bundle with WinTV ( Hauppauge TV...