Displays (1 Viewer)

Discussions about LCD, Plasma, Backprojection, Videobeamers, ect. go in here
MP1 MP2 32" Hd Lcd £399 DE
Specs are as follows: Inputs - Component Composite Two RGB Scarts S-Video HDMI PC VGA Max res - SXGA 1280 x 1024 75Hz
Specs are as follows: Inputs - Component Composite Two RGB Scarts S-Video HDMI PC VGA Max res - SXGA 1280 x 1024 75Hz
Hi, I have just got home with a 32" HD LCD made by Technovision. It was bought from Tesco for £399.97 It is amazing in...
Replies
1
Views
1K
from your link to pnasonic PDP so it doesn't support 1280 x 720. And windows selects the max resolution that is supported by both displays P.S. sorry, have overlooked that you have connected it over HDMI (assuming you have DVI-HDMI adapter) - in that case it should work Have you tried to configure your monitors as extended desktop...
from your link to pnasonic PDP so it doesn't support 1280 x 720. And windows selects the max resolution that is supported by both...
Win7 home 64 bit. Having a problem driving 2 monitors simultaneously, duplicated (as opposed to spreading the desktop across the...
Replies
2
Views
1K
Using a 16:10 ratio will cause some aspects of skin to be shown incorrectly, so do not post bugs about this, that should be your only problem.
Using a 16:10 ratio will cause some aspects of skin to be shown incorrectly, so do not post bugs about this, that should be your...
Hi, I'm thinking of getting a Samsung 220HD to run with Media Portal, but I understand it's a 16:10 ratio display...
Replies
1
Views
1K
Your best bet would be to look round eBay, or sometimes there are good deals on HotdealsUK. Would another idea, not be to put a TV Card in your PC, which would in effect avoid the need for it to be a TV Also. But I suppose you already gor one now.
Your best bet would be to look round eBay, or sometimes there are good deals on HotdealsUK. Would another idea, not be to put a TV...
Can anyone recommend a 19" LCD TV which also works well as a PC monitor? I want to replace the TV I have in the kitchen as it...
Replies
1
Views
1K
Hi everyone, I have a projector for now 3 years and the thing that most annoyed me with it was how to calibrate the colors(by that i mean brightness, contrast, gamma, saturation). Up to 2 months ago, i had been doing that by comparing the image with one my lcd, but it s hell!! Recently i discovered this site AVS Forum -...
Hi everyone, I have a projector for now 3 years and the thing that most annoyed me with it was how to calibrate the colors(by...
Hi everyone, I have a projector for now 3 years and the thing that most annoyed me with it was how to calibrate the colors(by...
Replies
0
Views
1K
I'm loking for a software that will handle use of touchscreen (15") in a good way. The main features I'm looking for is possibility to use touchscreen to start a movie/navigate etc. but play the movie on the projector only, preferrably with controls (play/pause/subtitiles etc) available on the touchscreen during playback. Will...
I'm loking for a software that will handle use of touchscreen (15") in a good way. The main features I'm looking for is possibility...
I'm loking for a software that will handle use of touchscreen (15") in a good way. The main features I'm looking for is possibility...
Replies
0
Views
1K
I have given up on removing jerky panning on HDTV. SDTV material on my PAL transmission looks great, but as soon as I watch live or recorded HDTV, all panning scenes are jerky. Zooming and stills are perfect. I tried all possible frequencies, deinterlacing modes, resolutions with no sucess. My Panasonic plasma 42PV60 I think has a...
I have given up on removing jerky panning on HDTV. SDTV material on my PAL transmission looks great, but as soon as I watch live or...
I have given up on removing jerky panning on HDTV. SDTV material on my PAL transmission looks great, but as soon as I watch live or...
Replies
0
Views
1K
I am giving MediaPortal a run now as a replacement for MC7 I set in the General Configuration to open MediaPortal on my secondary screen which is set (with PowerStrip) on 852X480. For some reason MediaPortal open with 852*603 (at least that's what i saw in the configuration tab). Why isn't MediaPortal opening on the...
I am giving MediaPortal a run now as a replacement for MC7 I set in the General Configuration to open MediaPortal on my...
I am giving MediaPortal a run now as a replacement for MC7 I set in the General Configuration to open MediaPortal on my...
Replies
0
Views
1K
I've just sent back a lovely Samsung LE32R88 tv as it won't take a 50Hz PC signal over DVI/HDMI - I simply couldn't live with the juddervision that the 60Hz refresh rate would have given me. Now obviously I'm left looking for a replacement 32" LCD that will allow me to use the 50Hz (or a multiple of 25 I believe) refresh rate, a...
I've just sent back a lovely Samsung LE32R88 tv as it won't take a 50Hz PC signal over DVI/HDMI - I simply couldn't live with the...
I've just sent back a lovely Samsung LE32R88 tv as it won't take a 50Hz PC signal over DVI/HDMI - I simply couldn't live with the...
Replies
0
Views
1K
MP1 MP2 Which 32" LCD HDTV DE
thanks, this thread cna problem can be closed. I went with samsung LCD its great but the wife hates it.
thanks, this thread cna problem can be closed. I went with samsung LCD its great but the wife hates it.
I'm in the market for a new 32" LCD HD TV I got some good prices from the local retail shop Which one? NEC -...
Replies
3
Views
1K
Hi Andrew, sorry for not filling out the profile. I will do that when I have more time. A have a AMD 780G with integrated ATI graphic card, Athlon 4850e,WinXP and Mediaportal 1.02. The profiles are already implemented in CCC but when I switch to 2 displays, problem 2 occurs (mediaportal stays black). Thus, I think the best solution...
Hi Andrew, sorry for not filling out the profile. I will do that when I have more time. A have a AMD 780G with integrated ATI...
Hello, I hope anyone can help. I simply don't understand why my HTPC is reacting that way. Situation: I have either a 32" TV...
Replies
2
Views
1K
Hello Folks, I got this case: ::: PC case,ATX pc cases,HTPC case,Computer case,Power supply | GMC ::: ehich comes with an iMon-Display+buttons and remote control. If there are different versions of the display and/or remote control, I don't know how to identify them. With the help of the forum I managed to get the VFD working...
Hello Folks, I got this case: ::: PC case,ATX pc cases,HTPC case,Computer case,Power supply | GMC ::: ehich comes with an...
Hello Folks, I got this case: ::: PC case,ATX pc cases,HTPC case,Computer case,Power supply | GMC ::: ehich comes with an...
Replies
0
Views
1K
MP1 MP2 TV to support MP DE
Actually I'm not thinking of DLNA. DLNA is for movies only (file server). I have a DLNA TV already and it doesn't do live TV. I need a TV that supports live TV other than OTA, particulary RTSP. Otherwise yeah, I know there's slim chance of that.
Actually I'm not thinking of DLNA. DLNA is for movies only (file server). I have a DLNA TV already and it doesn't do live TV. I...
Does anyone know of a TV that would use MP (RTSP) as primary TV server? Basically, what I want to do is install a TV, point it to...
Replies
2
Views
2K
I´m thinking about buying a Sanyo PLV-Z700 Beamer (I just need a 720p beamer with Lensshift (see picture) - 1080p is just an add-on in this case) for a room of 6.5 to 4.2 meters with a big glass front (see picture - the marked area in blue is the window). I winter, I do not have any problems, but in summer, the sun can be bright in...
I´m thinking about buying a Sanyo PLV-Z700 Beamer (I just need a 720p beamer with Lensshift (see picture) - 1080p is just an add-on...
I´m thinking about buying a Sanyo PLV-Z700 Beamer (I just need a 720p beamer with Lensshift (see picture) - 1080p is just an add-on...
Replies
0
Views
2K
No, I have not made any progress. The TV that is there is fine so I'm not in a hurry. Shopping for one is just frustrating. Really haven't found anybody that can say something sensible about this 24p issue other that most sets can do this. Maybe the newer sets are all ok, I do not know. VdR
No, I have not made any progress. The TV that is there is fine so I'm not in a hurry. Shopping for one is just frustrating...
I'm looking for a new display to replace my Samsung 32". Despite the enormous choice that is proving difficult. I want 24p (Blu-Ray...
Replies
2
Views
2K
Here are the powerstrip profiles for the Samsung 2494HM LCD monitor (24" 16:9 1080p). Probably works on the other 2494xx monitors as well. Use them in combination with the refreshrate changer. Verified working on an ATI HD3600 card. /gibman
Here are the powerstrip profiles for the Samsung 2494HM LCD monitor (24" 16:9 1080p). Probably works on the other 2494xx...
Here are the powerstrip profiles for the Samsung 2494HM LCD monitor (24" 16:9 1080p). Probably works on the other 2494xx...
Replies
0
Views
2K
MP1 MP2 Multiple Monitors DE
Hi, My HTPC and TV and currently share a common wall with my bedroom. I've been thinking about running cables through the wall and putting a cheap 24" monitor in the bedroom.(+ Speakers and IR receiver) I'll set it up so that it just clones the current monitor. My question is will this work? and will it put extra strain on my...
Hi, My HTPC and TV and currently share a common wall with my bedroom. I've been thinking about running cables through the wall and...
Hi, My HTPC and TV and currently share a common wall with my bedroom. I've been thinking about running cables through the wall and...
Replies
0
Views
2K
Hi gentlemen, I was an early projector adopter. I own a Toshiba 1024*768 from 8 years now. Last week, I changed to an Optoma HD20. It has FullHD, great colors and wonderfull contrast (for the price). I'm not a projector specialist at all, but I recomand this projector without hesitation. Another point, it is very quite...
Hi gentlemen, I was an early projector adopter. I own a Toshiba 1024*768 from 8 years now. Last week, I changed to an Optoma...
Hi gentlemen, I was an early projector adopter. I own a Toshiba 1024*768 from 8 years now. Last week, I changed to an Optoma...
Replies
0
Views
2K
1366x768 - I think this is more or less standard native resolution for a wide set of LCD TVs.. Mine is 32". And I tried a lot of different ways to set up native resolution and nothing.. Even tried some software that allows you to build custom INF files for a monitor to force video adapter to use other resolutions, but this didn't work...
1366x768 - I think this is more or less standard native resolution for a wide set of LCD TVs.. Mine is 32". And I tried a lot of...
Hi all, i read many threads about dvi/hdmi, vga/vga, etc. but i am not sure what solution will be the best quality. Please can...
Replies
6
Views
2K
Those put everyone's TV's to shame! :) But if you buy a new TV, you need something suitably impressive to put it in.... AICO - Entertainment Units
Those put everyone's TV's to shame! :) But if you buy a new TV, you need something suitably impressive to put it in.... AICO -...
Hmm... The 12 monsters of TV Makes my 37" plasma look puny! :rolleyes:
Replies
1
Views
2K
YES VGA ist also analog!
YES VGA ist also analog!
Which is the best method to connect the pc to the plasma tv panel? I can connect via S-Video, VGA, DVI or via YPbPr ! At the...
Replies
4
Views
2K
Ok. Thanks anyway. I suppose the hitting it turns it back on thing seems to point to dodgy solder. Mine too started in hot weather/days with heating on. Thanks, Chris
Ok. Thanks anyway. I suppose the hitting it turns it back on thing seems to point to dodgy solder. Mine too started in hot...
Hi, I have a problem with a Philips Plasma TV conected to my PC. It cuts out. Some sort of relay goes click, sometimes...
Replies
5
Views
2K
Can't find the one i was looking at previously. Lots of XENARC monitors, but i think they only scale up to 1600x1200, and might not be able to display 1920x1080.
Can't find the one i was looking at previously. Lots of XENARC monitors, but i think they only scale up to 1600x1200, and might...
Hi! I've been looking for a smallish LCD screen in the 9-12" range. Getting one that is capable of doing 1920x1080 @50hz in...
Replies
5
Views
2K
excellent, I appreciate your responses. no need to keep searching then, tomorrow i'll get it!
excellent, I appreciate your responses. no need to keep searching then, tomorrow i'll get it!
I am planning to get a Samsung 46" N87 and I heard that there may be problems with pixel mapping (this thread for example...
Replies
6
Views
2K
Hi all, I'm experiencing this weird issue that popped up just today, yesterday everything was fine. I'm not sure if there's any technical term for this but my problem is that the HD Ready screen (sharp aquos) has the picture constantly moving from bottom to top. So I see multiple "instances" of the screen moving upwards. It seems...
Hi all, I'm experiencing this weird issue that popped up just today, yesterday everything was fine. I'm not sure if there's any...
Hi all, I'm experiencing this weird issue that popped up just today, yesterday everything was fine. I'm not sure if there's any...
Replies
0
Views
2K
AW: Re: usb lcd (photoframe) samsung on MP? That means that the frame doesnt start when pc is powered on? (only manualy?) So it seems not as good as i thought for an external display for mediaportal..
AW: Re: usb lcd (photoframe) samsung on MP? That means that the frame doesnt start when pc is powered on? (only manualy?) So...
Samsung produces a few photoframes with usb connection capable being used as a second monitor. You need to install samsung software...
Replies
4
Views
2K
I had a 42" plasma at the lower res, and loved it. Depending on how close you are too it, you wont be able to really read text at the 1024x768. But then again, I was about 8' away from mine. really. I ran it at 800x600 and it just looked awesome (it interpolates it). However, shop around, while I love newegg, I find them...
I had a 42" plasma at the lower res, and loved it. Depending on how close you are too it, you wont be able to really read text...
OK now that I have a nice HTPC with this wonderful piece of software that MediaPortal is I'm decided to buy a plasma TV as my...
Replies
1
Views
2K
Anonymous
A
Maybe the TV stores the 'Just Scan' settings for each refresh rate separately ?
Maybe the TV stores the 'Just Scan' settings for each refresh rate separately ?
Hi, using the ati HD5450 with the LG 55PK350 at 1080p 60Hz is fine. If I activate the dynamic refreshrate changer the display...
Replies
6
Views
2K
Hey martin nope decided against mostly because of viewing angles!! I borrowed a 22" from work hooked it up... when i was in the far corners of my couch i got the whitish glare... going for a px80 instead when my credit card will let me :-)
Hey martin nope decided against mostly because of viewing angles!! I borrowed a 22" from work hooked it up... when i was in the...
Could i just hook up an "ordinary lcd widescreen" monitor to my htpc and use that as a TV?? can a pc screen run HD?? What are...
Replies
7
Views
2K
AW: Anyone owns a 32" LCD TV with 1:1 pixelmapping ? mine hat 1:1 pixelmapping
AW: Anyone owns a 32" LCD TV with 1:1 pixelmapping ? mine hat 1:1 pixelmapping
Anyone owns one or has any experience ? Would love to buy me a 32 LCD TV but don't know whioch one is usefeul for mediaportal.
Replies
3
Views
2K
Top Bottom