Displays (5 Viewers)

Discussions about LCD, Plasma, Backprojection, Videobeamers, ect. go in here
Just now, my tv (philips 42PES0001D) died after 9 years, and now I'm searching for a good replacement. As I use mediaportal, I don't need a tv but a monitor will suffice. I watch a lot of videos/movies through onlinevideos, and as such, there's a wide variety on framerates which in the ideal world would be natively supported by the...
Just now, my tv (philips 42PES0001D) died after 9 years, and now I'm searching for a good replacement. As I use mediaportal, I...
Just now, my tv (philips 42PES0001D) died after 9 years, and now I'm searching for a good replacement. As I use mediaportal, I...
Replies
0
Views
9K
MP1 MP2 DIY TV Lift DE
Im in the UK, but the sites I'm looking at for some reason dont tell you what the extended length (of a full extension) slide are, I would assume its double as you mentioned but just wanted to make sure. The stroke of my actuator in 600mm, with a total extended length of 1305. I'm assuming when im measuring for the slide I can exclude...
Im in the UK, but the sites I'm looking at for some reason dont tell you what the extended length (of a full extension) slide are...
Hello there, just want to show you how to hide your TV within a cabinet or other diy-boxes. Main thing is a 24" linear...
Replies
9
Views
15K
Hi I'd like to upgrade my HTPC a bit by implementing an additional screen to the case: http://www.pollin.de/shop/dt/NTMwOT..._mit_Touchscreen_LS_7T_HDMI_DVI_VGA_CVBS.html Richt now I have the following running: The Pc is connected to a TV and a VF310. When the Pc is turned on the Screen comes up and is then turned on (please watch...
Hi I'd like to upgrade my HTPC a bit by implementing an additional screen to the case...
Hi I'd like to upgrade my HTPC a bit by implementing an additional screen to the case...
Replies
0
Views
4K
MP1 MP2 BenQ W1070 issue DE
That the point, it seems that it's not possible to detect it or i would say, i didn't find a way to detect it like it's hardware related. MP send frame even if the screen is in progress after change refresh rate lol. Actually, video start to play after all refresh command are sent, in my patch i have try to not start it until...
That the point, it seems that it's not possible to detect it or i would say, i didn't find a way to detect it like it's hardware...
I have just got a W1070 and run it via HDMI from my HTPC which runs MediaPortal. MediaPortal has a "dynamic refresh rate" setting...
Replies
7
Views
5K
from your link to pnasonic PDP so it doesn't support 1280 x 720. And windows selects the max resolution that is supported by both displays P.S. sorry, have overlooked that you have connected it over HDMI (assuming you have DVI-HDMI adapter) - in that case it should work Have you tried to configure your monitors as extended desktop...
from your link to pnasonic PDP so it doesn't support 1280 x 720. And windows selects the max resolution that is supported by both...
Win7 home 64 bit. Having a problem driving 2 monitors simultaneously, duplicated (as opposed to spreading the desktop across the...
Replies
2
Views
2K
Maybe the TV stores the 'Just Scan' settings for each refresh rate separately ?
Maybe the TV stores the 'Just Scan' settings for each refresh rate separately ?
Hi, using the ati HD5450 with the LG 55PK350 at 1080p 60Hz is fine. If I activate the dynamic refreshrate changer the display...
Replies
6
Views
2K
SpudR said: My other half seems to have the ability to do this. :rolleyes:
SpudR said: My other half seems to have the ability to do this. :rolleyes:
http://news.bbc.co.uk/1/hi/programmes/click_online/9725725.stm :D Don't think I can afford the price tag attached though.
Replies
10
Views
4K
Sony Bravia - get it backlit led with localdimming. I have a sharp LC 46LE700, but would not recommend it, or sharp.
Sony Bravia - get it backlit led with localdimming. I have a sharp LC 46LE700, but would not recommend it, or sharp.
Merry Christmas everybody, I'm looking for a 46" LED TV to connect via HDMI to my MediaPortal HTPC. What is the most reliable...
Replies
4
Views
3K
Your best bet would be to look round eBay, or sometimes there are good deals on HotdealsUK. Would another idea, not be to put a TV Card in your PC, which would in effect avoid the need for it to be a TV Also. But I suppose you already gor one now.
Your best bet would be to look round eBay, or sometimes there are good deals on HotdealsUK. Would another idea, not be to put a TV...
Can anyone recommend a 19" LCD TV which also works well as a PC monitor? I want to replace the TV I have in the kitchen as it...
Replies
1
Views
2K
Use latest Drivers from soundgraph and install patch for MP minidisplay as in this thread: https://forum.team-mediaportal.com/mediaportal-plugins-47/imon-vfd-minidisplay-driver-mediaportal-1-1-3-a-95616/
Use latest Drivers from soundgraph and install patch for MP minidisplay as in this thread...
Hi all! I have some problems with my new HTPC. My Imon LCD not want to talk with Mediaportal. It function with its own driver, but...
Replies
4
Views
4K
Hi I think there is no question that HDMI is the best option for sound if you have any content with >6 channel audio streams - I literally don't know of any other way to bundle 7.1 channels together in a cable. You're unlikely to have content with 7.1 audio channels for live TV or DVDs, but if you use your HTPC for Bluray playback...
Hi I think there is no question that HDMI is the best option for sound if you have any content with >6 channel audio streams - I...
Hey all, jus a bit confused here, I have a samsung series 6 LED TV, have been working good simply by using the HDMI port on the...
Replies
1
Views
4K
AW: Secondary display with touch? Hallo, i am using a 7zoll Touchscreen from nanovision called mimo. It´s connected by usb and no additional Powersupply is needed. The resolution ist 800x480. Here is a link Nanovision MIMO UM-720S (7" USB Touchscreen Display). It works like charm. For the first time you must made a calibriation...
AW: Secondary display with touch? Hallo, i am using a 7zoll Touchscreen from nanovision called mimo. It´s connected by usb and no...
Does anyone know some good display I can use with MP as a secondary display with touch function. Between 4 and 10 inches. It...
Replies
2
Views
2K
AW: Re: usb lcd (photoframe) samsung on MP? That means that the frame doesnt start when pc is powered on? (only manualy?) So it seems not as good as i thought for an external display for mediaportal..
AW: Re: usb lcd (photoframe) samsung on MP? That means that the frame doesnt start when pc is powered on? (only manualy?) So...
Samsung produces a few photoframes with usb connection capable being used as a second monitor. You need to install samsung software...
Replies
4
Views
2K
solved - faulty HDMI input on the TV.
solved - faulty HDMI input on the TV.
Hi, can anyone help me troubleshoot a problem? I think it could be an interference issue, but having said that, there are...
Replies
1
Views
2K
It will proably be able to receive 1280x720@50Hz, but since the panel resolution is 1024x768 it will look awful...
It will proably be able to receive 1280x720@50Hz, but since the panel resolution is 1024x768 it will look awful...
Hi all - what a fantastic forum, and sooo many helpfull people...;) I have a 40" inch LG Plasma (LG42P6010). A good display, but I...
Replies
5
Views
5K
I am giving MediaPortal a run now as a replacement for MC7 I set in the General Configuration to open MediaPortal on my secondary screen which is set (with PowerStrip) on 852X480. For some reason MediaPortal open with 852*603 (at least that's what i saw in the configuration tab). Why isn't MediaPortal opening on the...
I am giving MediaPortal a run now as a replacement for MC7 I set in the General Configuration to open MediaPortal on my...
I am giving MediaPortal a run now as a replacement for MC7 I set in the General Configuration to open MediaPortal on my...
Replies
0
Views
2K
No, I have not made any progress. The TV that is there is fine so I'm not in a hurry. Shopping for one is just frustrating. Really haven't found anybody that can say something sensible about this 24p issue other that most sets can do this. Maybe the newer sets are all ok, I do not know. VdR
No, I have not made any progress. The TV that is there is fine so I'm not in a hurry. Shopping for one is just frustrating...
I'm looking for a new display to replace my Samsung 32". Despite the enormous choice that is proving difficult. I want 24p (Blu-Ray...
Replies
2
Views
2K
i cant seem to get 50hz on this screen..i only have 29, (interlaqced), 30(interlaced), 59 and 60 hZoptions is there hidden options or something? i have the monitor drivers installed..but id like to get 50hz at least if possible ah just found 50hz in nvidia control panel..woot
i cant seem to get 50hz on this screen..i only have 29, (interlaqced), 30(interlaced), 59 and 60 hZoptions is there hidden...
Hi all My desktop monitor died today and i bought a new screen. Its only 23" for while im using my desktop but i often like...
Replies
3
Views
2K
MP1 MP2 TV to support MP (1 Viewer) DE
Actually I'm not thinking of DLNA. DLNA is for movies only (file server). I have a DLNA TV already and it doesn't do live TV. I need a TV that supports live TV other than OTA, particulary RTSP. Otherwise yeah, I know there's slim chance of that.
Actually I'm not thinking of DLNA. DLNA is for movies only (file server). I have a DLNA TV already and it doesn't do live TV. I...
Does anyone know of a TV that would use MP (RTSP) as primary TV server? Basically, what I want to do is install a TV, point it to...
Replies
2
Views
2K
  • Poll
so i posted earlier when i didnt have a 3d tv ..now i do i havnt got my glasses yet (still waiting on them to be mailed to me honestly its a gimmick and they say u can really watch it for more than 30 mins without getting a headache...let alone a 2+ hour movie..lol when 3d tv's which do not require glasses come out..u will...
so i posted earlier when i didnt have a 3d tv ..now i do i havnt got my glasses yet (still waiting on them to be mailed to me...
As the Title says, this is a poll about buying or having already a 3D ready TV. Maybe this thread can show the importance of...
Replies
17
Views
4K
MP1 MP2 CRT TV for MP DE
Hi. SCART is a European (stupid) thing, which is not very well supported by PC cards - as well as much other equipment. SCART inputs might often accept s-video input. If your does, this is probably the way to go. Regarding analogue picture quality, I think it is like this: VGA (often called "PC-input" on TV's) Component (red, green...
Hi. SCART is a European (stupid) thing, which is not very well supported by PC cards - as well as much other equipment. SCART...
Hi there In lack of possibilities to get an LCD TV i have to use some CRT TV for living room. I have composite and scart...
Replies
4
Views
2K
MP1 MP2 LED TVs (1 Viewer) DE
I agree, I prefer plasma displays. However I really love my Hitachi LED backlit LCD simply because it is so thin and light :)
I agree, I prefer plasma displays. However I really love my Hitachi LED backlit LCD simply because it is so thin and light :)
Hey guys I was just wondering if anyone had any experience with LED Televisions. I have heard nothing but good things but the...
Replies
8
Views
4K
MP1 MP2 TV Resolution Issue (1 Viewer) DE
sounds similar to the problem I was having with my toshiba tv. I know you've said that the refresh rate is correct but have you actually tried changing it? Mine was set to 59hz, I put this on 50hz and it fixed it. Have a look at your tv manual for what the range is for hdmi on that model (mine was 50-60hz) and have a play around with...
sounds similar to the problem I was having with my toshiba tv. I know you've said that the refresh rate is correct but have you...
My HTPC is running Vista Ultimate (and MP 1.01) with a ATI 4670 video card and the latest drivers, and it's connected via HDMI...
Replies
9
Views
4K
AW: Anyone owns a 32" LCD TV with 1:1 pixelmapping ? mine hat 1:1 pixelmapping
AW: Anyone owns a 32" LCD TV with 1:1 pixelmapping ? mine hat 1:1 pixelmapping
Anyone owns one or has any experience ? Would love to buy me a 32 LCD TV but don't know whioch one is usefeul for mediaportal.
Replies
3
Views
3K
Here are the powerstrip profiles for the Samsung 2494HM LCD monitor (24" 16:9 1080p). Probably works on the other 2494xx monitors as well. Use them in combination with the refreshrate changer. Verified working on an ATI HD3600 card. /gibman
Here are the powerstrip profiles for the Samsung 2494HM LCD monitor (24" 16:9 1080p). Probably works on the other 2494xx...
Here are the powerstrip profiles for the Samsung 2494HM LCD monitor (24" 16:9 1080p). Probably works on the other 2494xx...
Replies
0
Views
2K
Hello Folks, I got this case: ::: PC case,ATX pc cases,HTPC case,Computer case,Power supply | GMC ::: ehich comes with an iMon-Display+buttons and remote control. If there are different versions of the display and/or remote control, I don't know how to identify them. With the help of the forum I managed to get the VFD working...
Hello Folks, I got this case: ::: PC case,ATX pc cases,HTPC case,Computer case,Power supply | GMC ::: ehich comes with an...
Hello Folks, I got this case: ::: PC case,ATX pc cases,HTPC case,Computer case,Power supply | GMC ::: ehich comes with an...
Replies
0
Views
2K
thank you :) lets plug in ;)
thank you :) lets plug in ;)
found an hdmi cable it says "certificate no. 3b17-10" used google to figure it out. is it hdmi 1.3? older? my tv says...
Replies
3
Views
3K
Hi gentlemen, I was an early projector adopter. I own a Toshiba 1024*768 from 8 years now. Last week, I changed to an Optoma HD20. It has FullHD, great colors and wonderfull contrast (for the price). I'm not a projector specialist at all, but I recomand this projector without hesitation. Another point, it is very quite...
Hi gentlemen, I was an early projector adopter. I own a Toshiba 1024*768 from 8 years now. Last week, I changed to an Optoma...
Hi gentlemen, I was an early projector adopter. I own a Toshiba 1024*768 from 8 years now. Last week, I changed to an Optoma...
Replies
0
Views
2K
Latter-day computer monitors could, but it was usually only over the 60-120Hz range - anything below 60Hz was too flickery to be usable so there was no point in supporting it. Remember domestic 24Hz video only arrived with Blu-ray - DVD doesn't support it, and traditionally film material was transferred to video at 50/60Hz with...
Latter-day computer monitors could, but it was usually only over the 60-120Hz range - anything below 60Hz was too flickery to be...
To be able to debug MediaPortal video playback better I will need a suitable LCD monitor. As a requirement it must support the...
Replies
15
Views
8K
Hi all, I'm experiencing this weird issue that popped up just today, yesterday everything was fine. I'm not sure if there's any technical term for this but my problem is that the HD Ready screen (sharp aquos) has the picture constantly moving from bottom to top. So I see multiple "instances" of the screen moving upwards. It seems...
Hi all, I'm experiencing this weird issue that popped up just today, yesterday everything was fine. I'm not sure if there's any...
Hi all, I'm experiencing this weird issue that popped up just today, yesterday everything was fine. I'm not sure if there's any...
Replies
0
Views
2K
Top Bottom