Post problems you have when using MediaPortal,
or pre installation questions in here.
Caused by corrupt database.
TVDatabaseV21.db3
Deleted - now OK
Caused by corrupt database.
TVDatabaseV21.db3
Deleted - now OK
TV-Server Version: N/A
MediaPortal Version: 0.2.3.0 svn Rev16563
MediaPortal Skin: BlueTwo Wide
Windows Version: XP Pro Fully...
Yes this will work for sure.. But I am starting mediaportal with my mce remote where I have used the mp fucus plugin. So if I could get both the batch file and mediaportal to start when i push tre green button it would be fine. Any sugestions??
Stefan
Yes this will work for sure.. But I am starting mediaportal with my mce remote where I have used the mp fucus plugin. So if I could...
Hello.
I have a simple qestion. Can you get mediaportal to run a batch command/file on startup?? It is for my clients. I would...
Hi,
did you read this FAQ?
I am not sure, if this helps you with problem one. But it should address at least issue two.
HTH,
Flip.
Hi,
did you read this FAQ?
I am not sure, if this helps you with problem one. But it should address at least issue two.
HTH,
Flip.
I have mkv files which have 2 audio stream. For some reason, MP internal player defaults to stream 2 instead of the first audio...
MediaPortal Version: 0.2.3.0
Having installed version 2.3.0 of mediaportal, I now find that it remains running in the background for about 30 seconds after exiting the program.
It seems to do this only if I accessed the Program Guide, then exit. Because it is running in the background it won't let me launch the program again...
MediaPortal Version: 0.2.3.0
Having installed version 2.3.0 of mediaportal, I now find that it remains running in the background...
MediaPortal Version: 0.2.3.0
Having installed version 2.3.0 of mediaportal, I now find that it remains running in the background...
Same problem here, could you fix it?
Same problem here, could you fix it?
TV-Server Version:
MediaPortal Version: 0.2.3.0 Final
MediaPortal Skin: BlueTwo Wide
Windows Version: Vista Ultimate 32 Bit...
Thanx ! This seems to work.
Thanx ! This seems to work.
TV-Server Version:
MediaPortal Version: 0.2.3
MediaPortal Skin: Project Mayhem III
Windows Version: XP SP2
CPU Type...
Just wondering if anyone can help me out with channel setup for Dave. I cannot receive it on my DVBT cards. It is pixelating/freezing with intermittent sound.
I am using the Crystal Palace transmitter and have scouted around on the net for an up to date Freeview frequency table, but no joy.
Many thanks
Darren
Just wondering if anyone can help me out with channel setup for Dave. I cannot receive it on my DVBT cards. It is...
Just wondering if anyone can help me out with channel setup for Dave. I cannot receive it on my DVBT cards. It is...
Hi,
i just reinstalled my TVE3 with single-seat und imported my tv-channels and i recognized that only the groups of the tv-channels are backuped (also all tv and radio channels) but what i am missing are the radio groups.
For my next reinstallation: in which file are the radio-groups stored? How can i backup these?
thanx
Hi,
i just reinstalled my TVE3 with single-seat und imported my tv-channels and i recognized that only the groups of the...
Hi,
i just reinstalled my TVE3 with single-seat und imported my tv-channels and i recognized that only the groups of the...
TV-Server Version:
MediaPortal Version: 0.2.3
MediaPortal Skin: Project Mayhem III
Windows Version: XP SP2
CPU Type: AMD-BE-2350 X2 64bit dual core
HDD: Western Digital 320GB SATA 7200 RPM
Memory: Premium 1024 MB DDR2
Motherboard: ASUS M2A-VM HDMI
Motherboard Chipset:
Motherboard Bios:
Video Card: ATI
Video Card Driver...
TV-Server Version:
MediaPortal Version: 0.2.3
MediaPortal Skin: Project Mayhem III
Windows Version: XP SP2
CPU Type...
TV-Server Version:
MediaPortal Version: 0.2.3
MediaPortal Skin: Project Mayhem III
Windows Version: XP SP2
CPU Type...
I would also like to know if this display is supported by MediaPortal. I have seen that the 634 model is supported, but no indication about the 632.
RICHARDG, are you able to turn the 632 LCD off? I am receiving my nMedia 200 case in a couple of days and will order the 632 LCD from CrystalFontz if it's supported by MediaPortal...
I would also like to know if this display is supported by MediaPortal. I have seen that the 634 model is supported, but no...
Hi all.
Anyone kno wif its possible to get the Crystalfontz 632 display working with Mediaportal and if so how.
I don't know what is going on, but it refuses to take any of the mapping changes I throw at it. I even modified the original MCE xml file, but nothing changed.
I managed through HIP now however, cba trying to figure out what is wrong with it.
I don't know what is going on, but it refuses to take any of the mapping changes I throw at it. I even modified the original MCE...
I'm trying to get into fullscreen visualisation mode while playing music, through the MCE remote control.
I have the version with...
Hi all. I'm a new user.
I setup MediaPortal. Work fine. Amazing... :thx:
I use MP with external player ZoomPlayer and eventghost temporarly with a wi-fi joystick.
I wish to execute in MP some Ati profile shoutcut to switch refresh monitor (a secondaty monitor, a Panasnic Plasma 37pv60)
"D:\Program Files\ATI...
Hi all. I'm a new user.
I setup MediaPortal. Work fine. Amazing... :thx:
I use MP with external player ZoomPlayer and eventghost...
Hi all. I'm a new user.
I setup MediaPortal. Work fine. Amazing... :thx:
I use MP with external player ZoomPlayer and eventghost...
The problem here is that there is a newer revision of the Freecom DVB-T stick out that has a different chipset (Realtek 2831) and different BDA drivers.
I've got this new revision working by adding the following to CaptureCardDefinitions.xml:
<capturecard commercialname="Freecom USB 2.0 DVB-T Device" capturename="REALTEK...
The problem here is that there is a newer revision of the Freecom DVB-T stick out that has a different chipset (Realtek 2831) and...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 (2006-07-03)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)...
My capturecard works now :D
My updated entry looks like this: (updated my previous post too..)
<capturecard commercialname="Hauppauge PVR USB2 AVS Video Capture" capturename="Hauppauge PVR USB2 AVS Video Capture" devid="vid_2040&pid_2400">
<capabilities tv="true" radio="true" mpeg2="true" mce="true" sw="false"...
My capturecard works now :D
My updated entry looks like this: (updated my previous post too..)
<capturecard...
I'm trying to get MediaPortal set up so it will run the Hauppage WinTV PVR USB 2, but MP does not recognize it. I can get video...
Have you found a solution to the problem. Mine just started acting up. Previously I had no problems... and changed nothing but now if I click on the other monitor MP minimized to the desktop. I don't get what is going on.
Have you found a solution to the problem. Mine just started acting up. Previously I had no problems... and changed nothing but...
Hi,
I am having strange problem with Vista, MP and Dual Screen (Nvidia) and hoped some one might be able to help.
I run...
Is there a way to choose on which channel the Epg Grabber should grab ?
Windows Version: Windows XP Professional SP2
Memory: 2 GB
1. TV Card: Twinhan Starbox II
1. TV Card Type: DVB-S
1. TV Card Driver: 1.0.3.4
Is there a way to choose on which channel the Epg Grabber should grab ?
Windows Version: Windows XP Professional SP2
Memory: 2...
Is there a way to choose on which channel the Epg Grabber should grab ?
Windows Version: Windows XP Professional SP2
Memory: 2...
Ie. for videos (with SimpleMP)
Select [Switch view]
Ie. for videos (with SimpleMP)
Select [Switch view]
Ok this has been probably already been answered but can't find it.
Where is that database thingy I seriously don't get it.
I look...
hi, ichessblumen.
Thanks for your reply. I going to test for a next week. ;)
hi, ichessblumen.
Thanks for your reply. I going to test for a next week. ;)
TV-Server Version:
MediaPortal Version: 0.2.3.0 + LAST SVN
MediaPortal Skin: Bluetwo
Windows Version: WINDOWS XP PROFESSIONAL...
MediaPortal Version: 0.2.3.0
MediaPortal Skin:
Windows Version: XP SP2
CPU Type: AMD X2 4800+
HDD: 2*500GB Samsung Spinpoint Sata2
Memory: 2gb 667mhz PC5300
Motherboard: ASUS M2A-VM HDMI
Motherboard Chipset: AMD 690G ATI SB600
Video Card: ATI Radeon X1250
Sound Card: ALC883 HD
Sound Card AC3: ALC883 HD
Remote: MCE
TV: Andersson...
MediaPortal Version: 0.2.3.0
MediaPortal Skin:
Windows Version: XP SP2
CPU Type: AMD X2 4800+
HDD: 2*500GB Samsung Spinpoint...
MediaPortal Version: 0.2.3.0
MediaPortal Skin:
Windows Version: XP SP2
CPU Type: AMD X2 4800+
HDD: 2*500GB Samsung Spinpoint...
Why? I can point every dev to the obvious code... Can't be that fast to check all files in every subdir regardless which folder you're entering :rolleyes:
That's why I added the setting plnight uses.. Currently you just have to decide whether every movie has an own dir or not.
Why? I can point every dev to the obvious code... Can't be that fast to check all files in every subdir regardless which folder...
TV-Server Version:
MediaPortal Version: 2.3RC3
MediaPortal Skin: X-Face 1.3
Windows Version: XP Pro Sp2
CPU Type: AMD 4600+...
I haven't done any testing other than reinstalled Daemon tools, new nvidia driver(169.09) and such. But still the same problem.
I haven't done any testing other than reinstalled Daemon tools, new nvidia driver(169.09) and such. But still the same problem.
If I stop playing a DVD iso file from my HD, then exit and restart MP, start the same ISO file, MP completely stop working. ANd if...
Up... No support for this? :o
Condamned to forget Web plugin or to install SVN? :wtf:
Up... No support for this? :o
Condamned to forget Web plugin or to install SVN? :wtf:
TV-Server Version:
MediaPortal Version: 0.2.3.0 Stable
MediaPortal Skin: BlueTwo
Windows Version: XP Pro SP2
CPU Type: Duron...
:sorry: :oops: me stupid have dog sex on my face :thx:
it was not me USING OTHER OLD SKINS
:sorry:
OOPS
USING THE BLUESkiN NOW BUTTON WORKS :D :thx: :sorry:
:sorry: :oops: me stupid have dog sex on my face :thx:
it was not me USING OTHER OLD SKINS
:sorry:
OOPS
USING THE...
TV-Server Version: none
MediaPortal Version: rc2, rc3
MediaPortal Skin: bluetwo
in music when you menu and go to 'add all to...
Tried this but it didn't work.
But today I formatted my PC and reinstalled Win XP + Mediaportal and now everything works again.
Tried this but it didn't work.
But today I formatted my PC and reinstalled Win XP + Mediaportal and now everything works again.
I can't play Musicvideos (Yahoo) or Trailers anymore and wonder why????
This has been a problem for a long time and i have tried...
Hi, I'm having an issue with two TV cards in my new HTPC build.
My setup is as follows:
MediaPortal Version: 0.2.3.0
MediaPortal Skin: Xface
Windows Version: Windows XP SP2
CPU Type: AMD 6000 with Zalman CNPS8000 Cpu Cooler
Mobo: Asus M2NPV-VM Mobo
Memory: 2G Kingston
Hard Drive: 500G Maxtor Sata
DVD Drive: Pioneer DVD...
Hi, I'm having an issue with two TV cards in my new HTPC build.
My setup is as follows:
MediaPortal Version: 0.2.3.0...
Hi, I'm having an issue with two TV cards in my new HTPC build.
My setup is as follows:
MediaPortal Version: 0.2.3.0...
thanks for suggestion.
My real goal is to hide the 'All Channel' list and use only a channel group, with a PIN Code ... but
- I am not able to hide the 'All Channel' list
- If I put a PIN Code on channel group it doesn't work ... I can select that channel group without PIN request
Would you please help me again.
Thanks in...
thanks for suggestion.
My real goal is to hide the 'All Channel' list and use only a channel group, with a PIN Code ... but
- I...
TV-Server Version:
MediaPortal Version: 0.2.3.0
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard...
Directories..
Latest updates as of 21/Nov.
In CONFIG - if you go to VIDEOS to set directories - and try to DELETE the DVD as an option - it all seems to work - but then if you exit config and come back in - you're back to square 1 - your removal of the DVD has not worked.
Directories..
Latest updates as of 21/Nov.
In CONFIG - if you go to VIDEOS to set directories - and try to DELETE the DVD...
Directories..
Latest updates as of 21/Nov.
In CONFIG - if you go to VIDEOS to set directories - and try to DELETE the DVD...
I'm trying to add a DVB-S channel which i know is there but is not being picked up by a channel scan, the channel is unencrypted.
I have the Video Pid, Audio Pid, transponder frequency, FEC and symbol rate. This does not seem to be what MP asks for in the setup page for adding a channel, i.e. there are other parameters. Also when i...
I'm trying to add a DVB-S channel which i know is there but is not being picked up by a channel scan, the channel is unencrypted...
I'm trying to add a DVB-S channel which i know is there but is not being picked up by a channel scan, the channel is unencrypted...
I would also like to use the data on more than one PC (10 in my dreams but 2 when I am awake :) ).
Any suggestions?
I would also like to use the data on more than one PC (10 in my dreams but 2 when I am awake :) ).
Any suggestions?
Ok, so my mediaportal is up and running, My TV server is running too, all my films are stored on the server in a shared folder, how...
Oh, that's pretty good actually.
But there is no way to fix the menu items where they are permanently, and have only the selection portion move?
Oh, that's pretty good actually.
But there is no way to fix the menu items where they are permanently, and have only the...
Hi,
I've been using Meedio for a while, but with their recent announcements I have been looking at MP, and I have a few (hopefully...