General Support (211 Viewers)

Post problems you have when using MediaPortal, or pre installation questions in here.
MP1 MP2 nVidia DualTV MCE DE
I know there is a topic about this about two weeks old, I was hoping to find out if there was ever a simple solution. How can I get my nVidia DualTV MCE to work with MediaPortal? I would prefer not to use GraphEdit, unless there is a step by step for my card. Any help is appreciated. I installed the newest snapshot, it appears...
I know there is a topic about this about two weeks old, I was hoping to find out if there was ever a simple solution. How can I...
I know there is a topic about this about two weeks old, I was hoping to find out if there was ever a simple solution. How can I...
Replies
0
Views
1K
MP1 MP2 Freezing Video DE
I ran the 2.6GB Shaun of the Dead DivX6 file directly in WMP and it did make it to about an hour and 15, it then crashed. I'll try a few more when I get a chance, but it obviously takes more than 45 minutes to test anything.
I ran the 2.6GB Shaun of the Dead DivX6 file directly in WMP and it did make it to about an hour and 15, it then crashed. I'll try...
I've got a Media Center PC from Dell. I've discovered that, while 30 minute video files (sitcoms, etc.) in Divx or really any other...
Replies
2
Views
1K
Nope DMA set to ultra DMA mode 6
Nope DMA set to ultra DMA mode 6
When starting mediaportal I get a system process called "system" and this runs at between 80% to 99% of the processor, most of the...
Replies
21
Views
4K
I was wondering that also, know some people that have UPC digital.
I was wondering that also, know some people that have UPC digital.
Good news! Finally i got DVB-C to work in the netherlands. What you need: 1. FireDTV DVB-C 2. Alphacrypt Full 3.05 cam 3...
Replies
22
Views
14K
Media portal is not seeing the 'pctv dvb-t dual card' at all. No pinnacle software is running...
Media portal is not seeing the 'pctv dvb-t dual card' at all. No pinnacle software is running...
I'm using this card to see DVB-T television, but i have a problem, if i use the ADD button the program finds the card and tries to...
Replies
3
Views
2K
If you want to try then MP makes this easy(ier). Just add the 'composite' and 'svhs' to your TV channels and associaate these with your card and also group (analog !) in the settings. Now when you select these when MP is runnng then the 'croassbar' filter input is changed in software now paassing the new source through the...
If you want to try then MP makes this easy(ier). Just add the 'composite' and 'svhs' to your TV channels and associaate these...
Hi all, In the setup option for my ATI Theatre 550 pro card the line in option is greyed out. Is there a way of activating this...
Replies
2
Views
1K
Just a heads up, guys - after I threw a hissy fit over in the installation section, some kind-hearted people took pity on me, moved the thread over here and may be finding a an answer to the problem. Here's the thread: https://forum.team-mediaportal.com/showthread.php?t=10806 Best of luck, Mike
Just a heads up, guys - after I threw a hissy fit over in the installation section, some kind-hearted people took pity on me, moved...
I reinstalled the XP on my HTPC and decided to go with Mediaportal instead of PowerCinema. It worked fine for a breif moment and...
Replies
6
Views
2K
Follow the guidelines in this topic
Follow the guidelines in this topic
Any support yet, or planned, for the ATI All-In-Wonder 2006 Edition PCIe card?
Replies
3
Views
1K
Asked, answered and in the FAQ: http://wiki.team-mediaportal.com/FrequentlyAskedQuestions Please try searching just a little bit first before your next post ;)
Asked, answered and in the FAQ: http://wiki.team-mediaportal.com/FrequentlyAskedQuestions Please try searching just a little bit...
Hi, I´ve got a ATI Radeon graphics card with the latest drivers 6.8 (ATI Control Center) and got both a 19´ LCD monitor and 40´...
Replies
1
Views
1K
MP1 MP2 Haupaugge Remote DE
ok thanks
ok thanks
I am having some trouble with my Haupaugge remote being too fast. Often if I press a button it will press twice before I can...
Replies
5
Views
1K
Suggestion for new feature :oops: Neither scanning "All european frequencies" (that took a looong time :bitch: ) I got to obtain any new channel (only "updated" channels). As you say (thank you for the link) there are 22 TV channels and 6 Radio channels in Badajoz, plus 3 encripted channels!!!! (all detected only by ProDVB)...
Suggestion for new feature :oops: Neither scanning "All european frequencies" (that took a looong time :bitch: ) I got to...
Area: Media Portal Program MediaPortal Version: 0.2.0.2 (2006-07-22) MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2)...
Replies
10
Views
5K
...to http://pastebin.team-mediaportal.com... and put the link in here.
...to http://pastebin.team-mediaportal.com... and put the link in here.
I'm using a NVTV tuner with MP 2.0.0.4. The codec that I am using is is Intervision windvd7 It is running awsomely! I really can't...
Replies
2
Views
1K
MP1 MP2 DUGG bad XML DE
I'm not sure if this is relevant in this thread but I've written a small app that downloads JRobbo's XML file, replaces channel names and saves it at a specified output location. It runs as windows service in the background. I've been using it for some time now and it seems to update my EPG as expected. If anyone wants to give it a...
I'm not sure if this is relevant in this thread but I've written a small app that downloads JRobbo's XML file, replaces channel...
When I use DUGG to import the EPG and create the tvguide.xml file, MP won't import it at all and gives the error bad XML (file...
Replies
19
Views
3K
Hello, I'm also using a aopen va2000. No problems here. Fine card. Just can't use the recording quality settings. XFX is cheaper and the same hardware. (€25,- Alternate) Greetz...
Hello, I'm also using a aopen va2000. No problems here. Fine card. Just can't use the recording quality settings. XFX is...
Hey all, I've just installed MediaPortal and I'm very satisfied with it's functioning so far, I use it mainly for music playback...
Replies
6
Views
2K
Nice mork mpod! I got to tell ya MP is Awsome sco
Nice mork mpod! I got to tell ya MP is Awsome sco
MediaPortal Version: 2.0.0.4 Windows Version: LATEST EVERYTHING...Media Center 2005 CPU Type: dual 2.8 HDD: 300 Memory: 1gig...
Replies
4
Views
1K
Damn... D-MAN informed that it is not a HW-card. Incredible that a way of getting a decent/good quality picture from a STB is absent.
Damn... D-MAN informed that it is not a HW-card. Incredible that a way of getting a decent/good quality picture from a STB is absent.
I know the "quality" list; 1. DVI 2.RGB 3.S-video 4. Compositt. Is there no way to connect a STB to the computer using (at...
Replies
3
Views
1K
Nope, I have the same problem as you do, as does others I have seen in the forum...
Nope, I have the same problem as you do, as does others I have seen in the forum...
When a channel swiches from AC3 sound to MP2 sound MediaPortal freezes. If you take a look at the log at 17:55 (when the local...
Replies
2
Views
2K
I just thought of a way to do this better than using a playlist. If you add the folder that has your music videos to the my music shares then add the file type (eg .avi) to the my music file types. Media portal should play the videos inside of my music just like my videos except it will go onto the next file when the current one...
I just thought of a way to do this better than using a playlist. If you add the folder that has your music videos to the my...
As I would expect - When I select the first Audio file in a folder MP plays this then moves to the next and so on till all tacks in...
Replies
7
Views
2K
Problem went away when I manually configured the TV channels without selecting anything in the "Input via" box. I cannot use the Zap2it plugin auto populate feature requires a selection for an input. Which is too bad since it is a great plugin.
Problem went away when I manually configured the TV channels without selecting anything in the "Input via" box. I cannot use the...
This program is well designed and awsome! I unfortunatley have a problem with the lack of sound when viewing live tv when its a...
Replies
1
Views
1K
Try using a voltage-regulator on your zalman. My copper fan zalman came with this. A black box with a little regulator-knob.
Try using a voltage-regulator on your zalman. My copper fan zalman came with this. A black box with a little regulator-knob.
HI There I have a great Media Centre running Media portal however my one and only remaining problem is the noise of my CPU fan...
Replies
1
Views
1K
It was a bug in 0.2.0.0 Go here http://updates.team-mediaportal.com/ and get the 0.2.0.4 patch.
It was a bug in 0.2.0.0 Go here http://updates.team-mediaportal.com/ and get the 0.2.0.4 patch.
MediaPortal Version: 0.2.0.0 Windows Version: Windows XP SP2 32bit CPU Type: AMD Athlon64 4000+ (San Diego) HDD: 2 x 200,0 GB –...
Replies
1
Views
1K
No the problem isn't there. A few weeks ago I completely reformatted and installed Windows XP SP2 from scrath and then Media Portal 0.2.0.0 (final). I am aware of the problems with no signal detected that some RC/SVN versions had before the final release; but those were different as it happened when switching channels. It's...
No the problem isn't there. A few weeks ago I completely reformatted and installed Windows XP SP2 from scrath and then Media Portal...
I'm getting this annoying window saying "No signal detected" when fastforward or rewind on DVB-T channels (it seems this doesn't...
Replies
8
Views
2K
I have just sent it to service at the local computerstore, so in af few days i will know if it is my system there is something wrong with, or det tv tuner has a problem :) But when i get it back i´ll let you know it it works or not :)
I have just sent it to service at the local computerstore, so in af few days i will know if it is my system there is something...
Hey everybody :) I have a Hauppage WinTV-HVR 900, and it works fine finding the tv channels... but there is no audio :S I have...
Replies
2
Views
2K
Does anybody have the right values for the "bäckefors" transmitter, my Tv3 is allos just black, probably the same issue, I would rather not to a rescan of the channels.
Does anybody have the right values for the "bäckefors" transmitter, my Tv3 is allos just black, probably the same issue, I would...
Hi My TV3 dissapeared last night and now I can't get it back. all I get is a black screen. Have tried to remove it from the list...
Replies
6
Views
2K
Hi, yes, MP will work with your TV as monitor. :) For the TV Tuner, please fill out your system specs in User CP and fill out the above template. Flip.
Hi, yes, MP will work with your TV as monitor. :) For the TV Tuner, please fill out your system specs in User CP and fill out the...
MediaPortal Version: Windows Version: CPU Type: HDD: Memory: Motherboard: Motherboard Chipset: Motherboard Bios...
Replies
1
Views
957
There are instructions in the ticky posts at the top of the support forums. Use the mediaportal pastebin to avoid clogging the thread (or attach the logs as files in the forum).
There are instructions in the ticky posts at the top of the support forums. Use the mediaportal pastebin to avoid clogging the...
Area: Media Portal Program MediaPortal Version: 0.2.0.4 (2006-08-11) MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2)...
Replies
3
Views
1K
Not without the help of external applications (HIP, Girder), but they need a modified driver. Search the forums or ask google. ;)
Not without the help of external applications (HIP, Girder), but they need a modified driver. Search the forums or ask google. ;)
I'm using this remote control with MP, and it's been working just great. I bought it from Ebay and I think it's a MCE2005...
Replies
1
Views
1K
Unfortunately, I don't think that works here in the US. I don't know of a DVB-S card that works with DirecTV (or any other satellite provider for that matter). If you know of one, please send me a link!
Unfortunately, I don't think that works here in the US. I don't know of a DVB-S card that works with DirecTV (or any other...
I currently have a Hauppauge PVR-500 and analog cable TV. I'm looking to ditch cable and go with satellite TV (DirecTV). However...
Replies
11
Views
3K
I tested it now with "Matrix reloaded" and it woks fine...maybe i havent tested it seens the last SVN update.
I tested it now with "Matrix reloaded" and it woks fine...maybe i havent tested it seens the last SVN update.
MediaPortal Version: Todays SVN build Windows Version: Windows XP SP2 Hi, I have some problems with getting the cast...
Replies
3
Views
1K
Yes, MP or more importantly the processes that MP uses require a good signal for proper functionality. Hopefully with the new TV engine, this annoyance will be put to bed once and for all. Regards
Yes, MP or more importantly the processes that MP uses require a good signal for proper functionality. Hopefully with the new TV...
MediaPortal Version: 0.2.0.4 Windows Version: MCE2005 CPU Type: Pentium 4 1,7GHz HDD: 120Gb maxtor 7200 Memory: 256mb RIMM...
Replies
1
Views
861
Top Bottom