Post problems you have when using MediaPortal,
or pre installation questions in here.
In regards to the memory, I'm pretty sure that the onboard gfx cards in the NVidia (and most others) motherboards use at least some of the system RAM. Some boards have 32Mb of nuilt in RAM and then use the system RAM for the rest.
I'm pretty sure you'll find that's where your missing RAM is.
To improve performance with the built in...
In regards to the memory, I'm pretty sure that the onboard gfx cards in the NVidia (and most others) motherboards use at least some...
Area: Media Portal locks up
MediaPortal Version: 0.2.0.0 RC4 (2006-04-1
MediaPortal Skin: MCE
Windows Version: Windows XP...
recently mediaportal scans the wrong folder when looking for movie info on imb.
Lates media portal latest snv
movies are in a folder with name now it search for video_ts ans not the movie name.
ok problem solved going back to an older svn..
recently mediaportal scans the wrong folder when looking for movie info on imb.
Lates media portal latest snv
movies are in a...
recently mediaportal scans the wrong folder when looking for movie info on imb.
Lates media portal latest snv
movies are in a...
please double check you resetted your MCE remote mapping to default with recent svn builds!
please double check you resetted your MCE remote mapping to default with recent svn builds!
I cant navigate my DVDS. I can navigate Media portal just fine with the arrow keys.
But use them to navigate a DVD nope. I think...
Just for our information: How do you swich between these "modes"? (this might be a key to finding the way to solve it)
Just for our information: How do you swich between these "modes"? (this might be a key to finding the way to solve it)
Hi All,
As the title suggests I'm a newbie to MediaPortal. So new in fact that I have yet to download and install it. Before I...
hi,
there is/are one or two checkboxes to tick in Project64. That should be located under the Option tab in the General configuration window. Can't remember the actual name of this/these option/s but it should be something sounding similar to "open rom and start emulation", "start fullscreen" or "start emulation fullscreen"...
hi,
there is/are one or two checkboxes to tick in Project64. That should be located under the Option tab in the General...
hi u, can someone please help me? i have project64 and znes installed in media portal. znes works fine starts the rom automaticall...
I will check again, but all i found before was a couple of references with Nova-T in them... thats it.
But as far as HAUPPAUGE is concerned, i saw nothing earlier...
cheers
I will check again, but all i found before was a couple of references with Nova-T in them... thats it.
But as far as HAUPPAUGE...
Hi guys...
I have finally decided to take the plunge from MCE to Media Portal.
I am using 0.2.0 RC4.
Problem is, that i...
take a look at this post: https://forum.team-mediaportal.com/viewtopic.php?t=8570
take a look at this post: https://forum.team-mediaportal.com/viewtopic.php?t=8570
Hi, I would just like to ask if it's possible to launch Media Portal with a game controller (I'm using Xbox 360 controller). I...
Hey people i was just wanting to know if anyone had an Ati remote wonder as i want how it work with media portal if at all and also the logitech Ultrax as they are both RF remotes and thats what i need so whos got them and how do the work
thanks in advance people
Hey people i was just wanting to know if anyone had an Ati remote wonder as i want how it work with media portal if at all and also...
Hey people i was just wanting to know if anyone had an Ati remote wonder as i want how it work with media portal if at all and also...
Well, I tried 7398, 2-3 weeks ago, and I can confirm in that time I've not had a single no signal error.
So it appears that whatever the changes were after 7400, they're what were affecting my install.
Well, I tried 7398, 2-3 weeks ago, and I can confirm in that time I've not had a single no signal error.
So it appears that...
Hi,
Where are SVN build numbers listed?
I'd like to try SVN Build 7400 as detailed here...
Seems to have fixed it's self after changing the skin back to Bluetwo from MP360. Working fine with both skins now.
Seems to have fixed it's self after changing the skin back to Bluetwo from MP360. Working fine with both skins now.
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-06.06.2006- 0:58:27,28
(2006-06-06)
MediaPortal Skin...
Search and you shall receive.....
Reading very carefully the thread here:
https://forum.team-mediaportal.com/viewtopic.php?t=5054
I've figured it out. If someone happens across this thread, I recommend they follow those directions, though I haven't myself, now that I understand how it works, I'll send off the data and see what...
Search and you shall receive.....
Reading very carefully the thread here...
I have an AverMedia CardBus MCE. Latest drivers.... although I'm not confident that their drivers are complete and/or working...
Can anyone advise me how to correct a problem I have on my server of MP clips playing back in the wrong aspect ratio?
I have two PCs: HTPC and SERVER. The clips are recorded through MP in widescreen and onto a HDD. I can then access them via the network and sometimes playback on the SERVER, also in widescreen (16:9 monitor)...
Can anyone advise me how to correct a problem I have on my server of MP clips playing back in the wrong aspect ratio?
I have two...
Can anyone advise me how to correct a problem I have on my server of MP clips playing back in the wrong aspect ratio?
I have two...
Here is my spec
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: BlueTwo
Windows...
Is there any way I can set my parhelia graphics card up to run media portal on my feature display.
Im currently splitting my desktop across the first two displays and have a tv on the third output and cant change that because i use the system for video editing during the day, but i was wondering if media portal could take advantage...
Is there any way I can set my parhelia graphics card up to run media portal on my feature display.
Im currently splitting my...
Is there any way I can set my parhelia graphics card up to run media portal on my feature display.
Im currently splitting my...
Have a look here:
https://forum.team-mediaportal.com/viewtopic.php?t=5937
Try if the plugin works with your release.
Or you can try MultiRes. Just write a small batch to change resolution, start mp, and after exit restore resolution.
http://www.entechtaiwan.com/util/multires.shtm
Have a look here:
https://forum.team-mediaportal.com/viewtopic.php?t=5937
Try if the plugin works with your release.
Or...
I know how to make Media Portal start up in fullscreen mode
but is there a way to start it in a specific resolution?
I have...
Hi,
Just press stop after you've entered the home screen (the recording will continue). As soon as the recording is finished, the PowerScheduler will notice this and put the system in suspend/hibernate mode.
Kind regards,
Michel
Hi,
Just press stop after you've entered the home screen (the recording will continue). As soon as the recording is finished...
Hi all,
I am not using timeshifting.
When I am too tired in the evening, I would like mediaportal to record the end of the...
Ok i have long story of disappointments. My first Card was a Kworld V-stream which has problems with the radio reception. after this i bought a pinnacle 310i, where the software ist terrible, same to the Kworld V-Stream.
My Hauppauge has the best radio reception, with lowest and cheapest aerial.
I want a working mediacenter...
Ok i have long story of disappointments. My first Card was a Kworld V-stream which has problems with the radio reception. after...
Ok i have long story of disappointments. My first Card was a Kworld V-stream which has problems with the radio reception. after...
I found a workaround for my problem. When I start notepad and I pressed with my remote a numeric key (for example: remote key 8 ). Then notepad was receiving an exclamation mark.
So I've seen that the key 8 on a keyboard without SHIFT, the same is like an exclamation mark.
I simple turned on the caps lock and I tried again in...
I found a workaround for my problem. When I start notepad and I pressed with my remote a numeric key (for example: remote key 8 )...
The numeric keys from my MCE (European version) remote do not work. When I have a look at the Configuration Menu (Remote, tab...
Hello, sorry for my bad english.
I Installed de MP 0.2 RC4 and the subtitles in divx/xvid/ogm/mkv don´t work :( (I Have the last SVN)
With the RC2 and the same configuration Works perfectly.
When i try to select a subtitle, it shows an empty screen instead of leaving the list subtitles available.
What´s the problem...
Hello, sorry for my bad english.
I Installed de MP 0.2 RC4 and the subtitles in divx/xvid/ogm/mkv don´t work :( (I Have the...
Hello, sorry for my bad english.
I Installed de MP 0.2 RC4 and the subtitles in divx/xvid/ogm/mkv don´t work :( (I Have the...
Shure i have. The card is not listed in Supported TV Cards, but maybe somebody has a solution or maybe sombody is working on a solution and i can help
Shure i have. The card is not listed in Supported TV Cards, but maybe somebody has a solution or maybe sombody is working on a...
Hi,
i guess there ist no need for the full template for this question except this
OS: WinXP Pro SP2
Media Portal: 0.2.0 RC4...
Hi,
Supported cards in MediaPortal you find here, if it's not listed there yo can get it supported with following this template & for common hardware support you will have to fill out this template. 8)
Regards
Roy
Hi,
Supported cards in MediaPortal you find here, if it's not listed there yo can get it supported with following this template &...
How can I make my Digiwave 103G dvb that I use with MyTheatre open when I press MyTV?
All of a sudden it started working again. I have no idea what the problem was or what made it go away. I guess I'll just have to be grateful it's working now.... :wink:
All of a sudden it started working again. I have no idea what the problem was or what made it go away. I guess I'll just have to be...
My EPG no longer works and I don't understand why. I use o2grabber to create a tvguide.xml file. I have checked the generated file...
things are a lot better now since removal/re install :)
things are a lot better now since removal/re install :)
i thought i was running rc4 but when MP loads the splash screen says rc3?
Details
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-04.06.2006-14:22:45,25
(2006-06-04)
MediaPortal Skin: BlueTwo Metal Dark
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: AC3Filter
Video Codec: DScaler Mpeg2 Video Decoder
CPU Type: AMD...
Details
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-04.06.2006-14:22:45,25
(2006-06-04)
MediaPortal Skin...
Hi,
I'm a noob, and only just recently started setting up a HTPC and Mediaportal. My problem is that some modules, like Weather...
Re: FOr urev
Hi!
sorry for my late answer.
kreller:
as I said: decompress the zip-file with the driver and follow the standard windows "add hardware" procedure. Choose the appropriate folder during the procedure where you can add a manually chosen folder. I don't remember the exactly folder name, but windows will grey out the...
Re: FOr urev
Hi!
sorry for my late answer.
kreller:
as I said: decompress the zip-file with the driver and follow the...
hello, i have asus 7131dual tv card, it sends sound via PCI. other programs can playback sound via it, but i dont know how to solve...
You must use the Support Template
You must use the Support Template
I have the above card running under Windows XP(SP2) and have managed to get it to work with mediaportal by swapping my card to MCE...
i've had almost the same problem with my set up ever since i formatted and reinstalled everything except i have an ati aiw 9000 pro and everytime i watch video it will black screen on me at random times usually anywhere between 10 mins to an hour
to make sure it wasn't a heating problem i tried just playing videos in wmp and media...
i've had almost the same problem with my set up ever since i formatted and reinstalled everything except i have an ati aiw 9000 pro...
Hi,
Just wanted to ask if anyone else has the same problem as me. I have got a PowerColor ATI Radeon 9250, and have a problem...
sure, that is one of the capabilities of powerstrip anyway
(and also to read EDID data)
sure, that is one of the capabilities of powerstrip anyway
(and also to read EDID data)
Hi.
I have a 32" LCD widescreen tv and it supports these resolutions via hdmi/dvi cable:
1024x768
1280x768
What is the...
Just to inform you that I changed that Registry Key to 167, and the two cards seems to work OK together with no problem. The scanning was made with the KNC card.
Let me say that in the last DVBt tunning parameters for Spain there is no OFFSET specify and some cards like KNC will not find any channel.
Juan
Just to inform you that I changed that Registry Key to 167, and the two cards seems to work OK together with no problem. The...
Area: Media Portal HW
Version: RC4 SVN 05/12
Skin: MCE
Windows Version XP SP2. Two cards patch installed
CPU Type: AMD 1700...
-> Philips BDA/DVB-C Tuner (CU1216)
needs to be:
-> Philips BDA/DVB-T Tuner (TU1216)
except this little change your xml file looks the same as mine.
-> Philips BDA/DVB-C Tuner (CU1216)
needs to be:
-> Philips BDA/DVB-T Tuner (TU1216)
except this little change your xml...
Hello everyone,
I have installed Mediaportal 0.2 RC4 on my XP SP2-machine and I'm using an Hauppage PVR150 MCE TV-Tuner and a...