Post problems you have when using MediaPortal,
or pre installation questions in here.
Hi,
Just press stop after you've entered the home screen (the recording will continue). As soon as the recording is finished, the PowerScheduler will notice this and put the system in suspend/hibernate mode.
Kind regards,
Michel
Hi,
Just press stop after you've entered the home screen (the recording will continue). As soon as the recording is finished...
Hi all,
I am not using timeshifting.
When I am too tired in the evening, I would like mediaportal to record the end of the...
Ok i have long story of disappointments. My first Card was a Kworld V-stream which has problems with the radio reception. after this i bought a pinnacle 310i, where the software ist terrible, same to the Kworld V-Stream.
My Hauppauge has the best radio reception, with lowest and cheapest aerial.
I want a working mediacenter...
Ok i have long story of disappointments. My first Card was a Kworld V-stream which has problems with the radio reception. after...
Ok i have long story of disappointments. My first Card was a Kworld V-stream which has problems with the radio reception. after...
I found a workaround for my problem. When I start notepad and I pressed with my remote a numeric key (for example: remote key 8 ). Then notepad was receiving an exclamation mark.
So I've seen that the key 8 on a keyboard without SHIFT, the same is like an exclamation mark.
I simple turned on the caps lock and I tried again in...
I found a workaround for my problem. When I start notepad and I pressed with my remote a numeric key (for example: remote key 8 )...
The numeric keys from my MCE (European version) remote do not work. When I have a look at the Configuration Menu (Remote, tab...
Hello, sorry for my bad english.
I Installed de MP 0.2 RC4 and the subtitles in divx/xvid/ogm/mkv don´t work :( (I Have the last SVN)
With the RC2 and the same configuration Works perfectly.
When i try to select a subtitle, it shows an empty screen instead of leaving the list subtitles available.
What´s the problem...
Hello, sorry for my bad english.
I Installed de MP 0.2 RC4 and the subtitles in divx/xvid/ogm/mkv don´t work :( (I Have the...
Hello, sorry for my bad english.
I Installed de MP 0.2 RC4 and the subtitles in divx/xvid/ogm/mkv don´t work :( (I Have the...
Shure i have. The card is not listed in Supported TV Cards, but maybe somebody has a solution or maybe sombody is working on a solution and i can help
Shure i have. The card is not listed in Supported TV Cards, but maybe somebody has a solution or maybe sombody is working on a...
Hi,
i guess there ist no need for the full template for this question except this
OS: WinXP Pro SP2
Media Portal: 0.2.0 RC4...
Hi,
Supported cards in MediaPortal you find here, if it's not listed there yo can get it supported with following this template & for common hardware support you will have to fill out this template. 8)
Regards
Roy
Hi,
Supported cards in MediaPortal you find here, if it's not listed there yo can get it supported with following this template &...
How can I make my Digiwave 103G dvb that I use with MyTheatre open when I press MyTV?
All of a sudden it started working again. I have no idea what the problem was or what made it go away. I guess I'll just have to be grateful it's working now.... :wink:
All of a sudden it started working again. I have no idea what the problem was or what made it go away. I guess I'll just have to be...
My EPG no longer works and I don't understand why. I use o2grabber to create a tvguide.xml file. I have checked the generated file...
things are a lot better now since removal/re install :)
things are a lot better now since removal/re install :)
i thought i was running rc4 but when MP loads the splash screen says rc3?
Details
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-04.06.2006-14:22:45,25
(2006-06-04)
MediaPortal Skin: BlueTwo Metal Dark
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: AC3Filter
Video Codec: DScaler Mpeg2 Video Decoder
CPU Type: AMD...
Details
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-04.06.2006-14:22:45,25
(2006-06-04)
MediaPortal Skin...
Hi,
I'm a noob, and only just recently started setting up a HTPC and Mediaportal. My problem is that some modules, like Weather...
Re: FOr urev
Hi!
sorry for my late answer.
kreller:
as I said: decompress the zip-file with the driver and follow the standard windows "add hardware" procedure. Choose the appropriate folder during the procedure where you can add a manually chosen folder. I don't remember the exactly folder name, but windows will grey out the...
Re: FOr urev
Hi!
sorry for my late answer.
kreller:
as I said: decompress the zip-file with the driver and follow the...
hello, i have asus 7131dual tv card, it sends sound via PCI. other programs can playback sound via it, but i dont know how to solve...
You must use the Support Template
You must use the Support Template
I have the above card running under Windows XP(SP2) and have managed to get it to work with mediaportal by swapping my card to MCE...
i've had almost the same problem with my set up ever since i formatted and reinstalled everything except i have an ati aiw 9000 pro and everytime i watch video it will black screen on me at random times usually anywhere between 10 mins to an hour
to make sure it wasn't a heating problem i tried just playing videos in wmp and media...
i've had almost the same problem with my set up ever since i formatted and reinstalled everything except i have an ati aiw 9000 pro...
Hi,
Just wanted to ask if anyone else has the same problem as me. I have got a PowerColor ATI Radeon 9250, and have a problem...
sure, that is one of the capabilities of powerstrip anyway
(and also to read EDID data)
sure, that is one of the capabilities of powerstrip anyway
(and also to read EDID data)
Hi.
I have a 32" LCD widescreen tv and it supports these resolutions via hdmi/dvi cable:
1024x768
1280x768
What is the...
Just to inform you that I changed that Registry Key to 167, and the two cards seems to work OK together with no problem. The scanning was made with the KNC card.
Let me say that in the last DVBt tunning parameters for Spain there is no OFFSET specify and some cards like KNC will not find any channel.
Juan
Just to inform you that I changed that Registry Key to 167, and the two cards seems to work OK together with no problem. The...
Area: Media Portal HW
Version: RC4 SVN 05/12
Skin: MCE
Windows Version XP SP2. Two cards patch installed
CPU Type: AMD 1700...
-> Philips BDA/DVB-C Tuner (CU1216)
needs to be:
-> Philips BDA/DVB-T Tuner (TU1216)
except this little change your xml file looks the same as mine.
-> Philips BDA/DVB-C Tuner (CU1216)
needs to be:
-> Philips BDA/DVB-T Tuner (TU1216)
except this little change your xml...
Hello everyone,
I have installed Mediaportal 0.2 RC4 on my XP SP2-machine and I'm using an Hauppage PVR150 MCE TV-Tuner and a...
Yes, the only change I made was to calibrate MP slightly "off". In the calibration there's a sqare that one is supposed to adjust to have equally long sides. I adjusted it to be slightly rectangular and it solved the problem with 4:3 aspect ratio. I haven't used the 16:9 aspect ratio since then so I'm not sure whether there's a...
Yes, the only change I made was to calibrate MP slightly "off". In the calibration there's a sqare that one is supposed to adjust...
Hi!
I have a problem. Someone else has asked a question about this in another forum on this site but has not yet gotten an...
Hmm, i've now tried that didnt seem to work.
I've tried these combos:
Video :nvidia Audio: nvidia
Video :nvidia Audio: fddshow
Video :nvidia Audio: cyberlink
Video :nvidia Audio: mpeg/AC3/DTS
Video :mpeg2dec: mpeg/AC3/DTS
Video :dscaler Audio: mpeg/AC3/DTS
Video :cyberlink Audio: mpeg/AC3/DTS
The one that's...
Hmm, i've now tried that didnt seem to work.
I've tried these combos:
Video :nvidia Audio: nvidia
Video :nvidia Audio...
timeshift seems to bring audio/video out of synch
I have the above problem, it's only by some milisecs but still noticable. It...
Hi,
I've also a small problem with MP + CVS from May 29th.
It seems, that it doesn't correctly reinitialize my SS2 card. If I go to standby/hibernate within MP and wake up again - I got some error with mux problemes and create sink buffer (if I switch to TV). If I exit and restart MP I can continue watch TV without any problem...
Hi,
I've also a small problem with MP + CVS from May 29th.
It seems, that it doesn't correctly reinitialize my SS2 card. If...
Simple question, which I just can't find an answer to... Can you make the MP shutdown/standby (in particular standby) mode put the...
Thanks guys for your advice.
I am VERY happy to report that a fresh install has cured practically all the problems listed. At the moment, the SVN for 2006-05-01 seems the most stable and I think I will use this until the next new release.
I still get the ocassion freeze when minimising MP to the sys tray, but I can live with...
Thanks guys for your advice.
I am VERY happy to report that a fresh install has cured practically all the problems listed. At...
I have seen MP at its best, just for some reason over time and several updates, the workability of the application has suffered and...
winfast tv 200 deluxe
All who have winfast tv 2000 deluxe and write unagle to create graph MUST INSTALL NEW DRIVER AND NEW SOFTWARE:
http://www.leadtek.com.tw/eng/support/download.asp?downlineid=63&downline=WinFast+TV+2000+XP+%28Deluxe+%2F+FM+%2F+RM%29
software: utility mulilanguage
winfast tv 200 deluxe
All who have winfast tv 2000 deluxe and write unagle to create graph MUST INSTALL NEW DRIVER AND NEW...
From the cvs-changlog: “MediaPortal TVEngine
On 08/02/2006 [11:41:04] dman_LFC added the following change: - WinFast TV2000 XP...
Update on this: I have tried again with success :-).
Here are my findings:
1. - It seems that there are two different IR codes which USBUIRT learns - long ones and short ones. Depending on the distance between the remote control and the USBUIRT the long ones or the short ones are recorded. I do not know the impact of long vs...
Update on this: I have tried again with success :-).
Here are my findings:
1. - It seems that there are two different IR...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-02.06.2006- 0:58:21,32
(2006-06-02)
MediaPortal Skin...
Hi,
Please provide the information needed according to this template
There is already a thread here about "no signal", if this it's same as yours.
Regards
Roy
Hi,
Please provide the information needed according to this template
There is already a thread here about "no signal", if this...
I have no signal detected or lost signal. I have haupage hvr 1300. And I use MP + MCE. What I have to do? Any svn dont work. Have...
Hi,
yeah. This is a codec problem. I have this too, with MPEG2Dec / MPV decoder. I have good results with DScaler, but other issues. I did not find a codec, yet, which gives me best results. :(
Other way to solve this is blindly hit enter, if you assume you are in the main menu. The movie will start. Hit F9 fo context menu und...
Hi,
yeah. This is a codec problem. I have this too, with MPEG2Dec / MPV decoder. I have good results with DScaler, but other...
I have a small problem, when I play some DVD's after the first intro the screen gos black, I can still here the sound but no...
I had the same problem but stoped using the autocheck funtion in the mail plugin and noise stoped .
I had the same problem but stoped using the autocheck funtion in the mail plugin and noise stoped .
Hi since i have setup uped mit system new, i hear every 5mins a crazy sound during everything
Is this a notification for...
Ahh, you might be ok then... I have a fairly high end plasma and you can really see the poor quality... (something to do with a comb filter for NTSC/PAL)... So it might be perfect on a CRT
Ahh, you might be ok then... I have a fairly high end plasma and you can really see the poor quality... (something to do with a...
Hi there,
How do I set up the analogue input source on my Dvico DVB-T Dual within MP? This is where I have my Foxtel coming...
i got it up and going now... must of hard a old driver! thanks cheers!!!
i got it up and going now... must of hard a old driver! thanks cheers!!!
Ok Guys I'm new to the post seen so please bare with me... I have a AVerMedia M150 card it says it's works with media portal I'm...
Good point, will create another thread.
Good point, will create another thread.
When I switch from Shares to Artist in My Music, it shows only several "objects,"maybe ten, out of the couple of hundred that it...
No, you can't.
No, you can't.
Hallo
Can someone tell me if you can connect a CI-module or something to Hauppauge WinTV HVR1300 to make it possible to watch...
Sorry,
I just typed some big rubbish. I had uninstalled MP some days ago because I was unsatisfied with it and I didn't know what I was writing about... :roll:
The only problem I still have is that MP cannot get fullscreened while TV is running. Then the screen will look like this.
But as I read this is a bug so I can't do...
Sorry,
I just typed some big rubbish. I had uninstalled MP some days ago because I was unsatisfied with it and I didn't know what...
Hi all!
I'm really new to this so perhaps this is a "bad" question...
My computer MP hangs when I start fullscreen mode for...
Has anyone tried to get the AOpen VX2000 USB Tv capture card to work with Media Portal :wink:
Has anyone tried to get the AOpen VX2000 USB Tv capture card to work with Media Portal :wink:
Has anyone tried to get the AOpen VX2000 USB Tv capture card to work with Media Portal :wink: