General talk regarding our HTPC-software MediaPortal 1 takes place here.
A log would have been helpful, before you restored back ;)
A log would have been helpful, before you restored back ;)
Hello everyone,
just to let you know, it appears that some automatic windows update from today or yesterday compromised my tv...
I am a newbie with Mediaportal (0.2.2). I run MP on XP MCE, and without much hassle I just press my MCE-remote to put MP to sleep/standby, and press again to wake it up (enabled USB-power on my main board in bios). This works great 100%, all the time.
After some googling I found out about Powerscheduler (shouldn't this be...
I am a newbie with Mediaportal (0.2.2). I run MP on XP MCE, and without much hassle I just press my MCE-remote to put MP to...
I am a newbie with Mediaportal (0.2.2). I run MP on XP MCE, and without much hassle I just press my MCE-remote to put MP to...
Don't know why is MP changing the native Windows suspend behavior
I really do not understand why the MP guys did those complicated things with the suspend issue, and so causing Windows not to handle standby properly. (Don't get me wrong, they generally do a great job).
Here are some facts, at least on my computer:
1. The native...
Don't know why is MP changing the native Windows suspend behavior
I really do not understand why the MP guys did those complicated...
Hi all,
I've installed MP 0.2.3RC1 and TVEngine3 0.2.3RC1 on XP over the weekend. It's a nice combo and TVEngine is an...
MCE Standby Tool (MST) could be a solution: it is designed to manage some parameters to make the PC standby/hibernate and wake up correctly but it has also the possibility to blank the screen during start-up or shutdown to avoid that any trace of Windows is visible.
The other possibility is, if you use the PC as a Mediaportal only...
MCE Standby Tool (MST) could be a solution: it is designed to manage some parameters to make the PC standby/hibernate and wake up...
Hi,
I dont know in what of all the forums to post this but I try here.
I have a MP setup. But it does take some time after the...
My windows is configured to turn off monitor after 2 hours of usage. If i am watching TV using MP, my TV goes back. Pressing any keys on the remote control does not help.
Is there any way i can configure MP or hauppauge IR service so that remote control usage is treated as "user activity" by Windows so that windows does not go...
My windows is configured to turn off monitor after 2 hours of usage. If i am watching TV using MP, my TV goes back. Pressing any...
My windows is configured to turn off monitor after 2 hours of usage. If i am watching TV using MP, my TV goes back. Pressing any...
Ah right ok, see I use MP TVServer as a central recording place so I don't get multiple copies of the same recorded tv. So my server handles the TV cards, doles out streams to the various clients, handles the centralised recordings, movies etc. By adding a tuner to each VM you get stand alone TV's but each VM also requires the...
Ah right ok, see I use MP TVServer as a central recording place so I don't get multiple copies of the same recorded tv. So my...
Hi All,
I have only just joined the MP but I have spent some time looking through the forums, Wiki and other sources of info and...
I tried tight-VNC, and this worked even worse than UVNC for me (both works great for remote Desktop, as long as you dont star Mediaportal...)
However as I mentioned above Salling clicker (Swedish company :-) www.salling.com solved all problems I had with remote control of my computer. And no, you dont need to have Vista on the...
I tried tight-VNC, and this worked even worse than UVNC for me (both works great for remote Desktop, as long as you dont star...
Been lurking in this forum for year, but never posted. Dont really know why. Time to change!
Anyway: I love Mediaportal and the...
cleao
None that I can see, but it's better at selling you something.
8)
cleao
None that I can see, but it's better at selling you something.
8)
:?: Is there any advantage in using MP with Windows Media Player 11 over the last version?
Cheers works a treat!!
Thats deeper i have ever been into PC.
Cheers works a treat!!
Thats deeper i have ever been into PC.
How do you make this piece of crap disappear?
Kid keeps accidentally pushing start on my remote and it opens up in the...
Hi, would you upload the driver once more?
Hi, would you upload the driver once more?
Hi,
I am running the latest mediaportal on my laptop running windows 2000 pro. I would like to know if i can get the mce remote...
Bump:
"Windows 10 IoT Core API Porting Tool
Are the APIs that your current Win32 application or library depend on available in Windows 10 IoT Core? If not, are there equivalent APIs you can use? This tool can answer these questions for you and assist you in migrating your current Win32 applications and libraries to Windows IoT Core...
Bump:
"Windows 10 IoT Core API Porting Tool
Are the APIs that your current Win32 application or library depend on available in...
http://dev.windows.com/en-us/featured/raspberrypi2support
I imagine this could be very interesting from a MediaPortal perspective...
hi
the main dev is gemx he has this windows client written
https://forum.team-mediaportal.com/announce_mptvclient_v1_2_5_20_12-t22027.html
this was the base for my test with whs
i have only modify from winform to whs addin dll
hi
the main dev is gemx he has this windows client written...
Currently I use windows vista with the vista mediacenter as my HTPC. There are a lot of things I hate about vista mce and offcourse...
Thanks guys... Seems like WHS is promising...
:-)
Thanks guys... Seems like WHS is promising...
:-)
Hi all.
Has anyone tried running TvEngine 0.3 on WHS ?
If so, what has been your experience ?
thank you
Anyways....
As far as I understand it it's just a 2003 server box with some missing services + an additional service + a client frontend to call into this service.
The most exiting thing for me would probably be the headless backup and easily expandable data retention system (raid but not raid....will have to read more about that)...
Anyways....
As far as I understand it it's just a 2003 server box with some missing services + an additional service + a client...
So...
Have anyone but me thought about this? Don't know if you have read about or seen this, but MS is coming out with a server...
i wonder if this thread is going off-topic......
the initial question was if WHS is able to host MediaPortal.
and as you can read in other threads, no it is not.
i wonder if this thread is going off-topic......
the initial question was if WHS is able to host MediaPortal.
and as you can read...
Hi devs,
Is it likely that Mediaportal will work on Windows Home Server (provided all drivers can be made to work)?
It is based...
The initial problem was that I couldn't install the font into \Windows\Fonts like one could in XP even before any of the skin problems.
Some googling told me that it could be bypassed but by the time I found that out I reformatted again. I've gone through another reformat since then, trying XP Black Edition this time.
Now none...
The initial problem was that I couldn't install the font into \Windows\Fonts like one could in XP even before any of the skin...
Firstly, what is Windows FLP? It's a cut-down version of XP used for older, legacy machines. Check the Wiki link for hardware...
I tried instantsheller. it didnt work - just a blank screen.
Has anyone had any luck with it?
I tried instantsheller. it didnt work - just a blank screen.
Has anyone had any luck with it?
Hi.
I'd like to know how can I complete transform my xp into a Media Center.
What I mean is that i don't wanna explore (or...
Any change that "how-to" will happen? :D . I think a lot of people would love this...
Any change that "how-to" will happen? :D . I think a lot of people would love this...
Hi,
is it possible to run MP under Windows CE?
Regards
Stoffl
Hi.
MadVR is a renderer similar to EVR or VMR9 used inside MediaPortal. This one providing the best known video playback quality today. But it has some limits on other side, so it's hard (just to avoid saying impossible) to implement this in MP...
Hi.
MadVR is a renderer similar to EVR or VMR9 used inside MediaPortal. This one providing the best known video playback quality...
I am looking to update my OS at Christmas to utilise Arcsoft's Total Media Theatre 5 for 3D Blu-rays within MP.
I am currently...
- Poll
FWIW on windows 10 I have qdvd.dll, and after installing MPC-HC and using directshow spy, it seemed to show it using what I believe to be a "normal" dvd navigator graph (but with its own video decoder for the mpeg2video decoding however, i.e. windows 10 has no built-in decoding filter for that). I also have other things installed...
FWIW on windows 10 I have qdvd.dll, and after installing MPC-HC and using directshow spy, it seemed to show it using what I believe...
As the communication from Microsoft is not very clear at the moment, it would be nice if the users of MediaPortal could help out...
To the best of my knowledge yes, though I may have some components that I didn't load in to windows 8.1. I only loaded the minimum it would let me load at install of 8.1 and have installed no extra features in to 8.1. AKA tried to keep it as unbloated as possible.
To the best of my knowledge yes, though I may have some components that I didn't load in to windows 8.1. I only loaded the minimum...
Any way to MP running with the 8.1 release preview? It doesn't run at all for me even in compatibility mode.
Please use the search function:
https://forum.team-mediaportal.com/threads/tv-server-and-windows-8.106286/
Please use the search function:
https://forum.team-mediaportal.com/threads/tv-server-and-windows-8.106286/
Hi Team,
Is there any way to install mediaportal on windows 8 Developer, bypassing the os check ?
Some characters don't work.. Like the @ symbol (shift 2)... And some others .. Considering my login for win 8 is an email address.. It was quite annoying! Plus.. To my knowledge there's no other way to do an @.
India fixes this for some reason... Happen on both my win 8 installs.
Some characters don't work.. Like the @ symbol (shift 2)... And some others .. Considering my login for win 8 is an email address...
Just wondering what will work best with MP and DVB-C cards.
Is there any reason to not install windows 8?
As far as I know this is not possible. I'd suggest looking at the Moving Pictures and TV Series plugins.
As far as I know this is not possible. I'd suggest looking at the Moving Pictures and TV Series plugins.
Does mediaportal support windows 7 libraries?
In the video section when putting folders of the videos, can we put a windows 7...
As great as the new mediacenter is, it has still this - at least for me - unprofitable media management.
But lets wait for the final.
As great as the new mediacenter is, it has still this - at least for me - unprofitable media management.
But lets wait for the final.
Hi Folks
I was going to post this in the MP 2 forums but they don't appear to be listed anymore?
Anyways, check out this vid...
I hope that Windows 7 x64 will be supported soon, eventually we will have to move on...
I'm using Windows 7 RC now and it seems pretty decent, with Vista I had sometimes a hang for no apparent reason and after a minute it just continued (but it always happened when I didn't have time to wait), Windows 7 doesn't seem to suffer from...
I hope that Windows 7 x64 will be supported soon, eventually we will have to move on...
I'm using Windows 7 RC now and it seems...
Hi there,
after upgrade to Windows 7 I've got some problems with the tv setup.
I have installed two tv cards (Cinnergy 1200...
I know what you mean :D I run the x86 7057 build and before the 7000 build on three machines. If there weren´t that expiration on march 2010 i wouldn´t ever think about installing a final. Why? Never touch a running System :D
I even forgot its only a BETA!
I know what you mean :D I run the x86 7057 build and before the 7000 build on three machines. If there weren´t that expiration on...
Well, I'm sorry to say that after the last few years of being a huge MediaPortal fan, I have had to go to Windows 7 MCE. I have no...
I would say 'ever and ever,' but no software can come close to pleasing me in that way. appart from MP ;-)
I would say 'ever and ever,' but no software can come close to pleasing me in that way. appart from MP ;-)
Has anyone tried windows 7 with mp and tvserver? I heard it is supposed to have much better video playback
In most cases Windows 2003 Server is much moore like XP Pro that it is like Winodws 2000. I can't see any reason why you'd run Windows 2003 as a front end MP client. Do you need active directory? how about a DNS or DHCP server? Either way if you are going to use the MCE keyboard and remote you need to get this update...
In most cases Windows 2003 Server is much moore like XP Pro that it is like Winodws 2000. I can't see any reason why you'd run...
Hi all
Have got TVe3 installed on Win2K and it will be standalone server (possibly using it for other in house services as...
I happily confirm that multiple FloppyDTVs work just fine with MediaPortal under Windows 10 ! (y)
Unfortunately I can't use Win10 as my main system just yet because of unrelated issues with my graphics card, but from a TV point of view everything went as smooth as possible.
Changed the FireWire driver to the Legacy one for Windows...
I happily confirm that multiple FloppyDTVs work just fine with MediaPortal under Windows 10 ! (y)
Unfortunately I can't use Win10...
Hi,
I've looked high and low but can't seem to find anybody confirming that Digital Everywhere Floppy DTV (DVB-C) cards will work...
