I think I found the possible problem. MediaPortal is scanning the wrong frequencies... The channels I miss are on a higher MHz but MediaPortal isnt scanning this range.
Why is that and how to solve...
Greetings!
Sebastian
Ich choosed now the whole Country not only my region in the scan panel and now I have all channels...
I think I found the possible problem. MediaPortal is scanning the wrong frequencies... The channels I miss are on a higher MHz but...
Hello,
I installed MediaPortal because I want to replace the TV Joy that comes with my Acer-Notebook.
Problem is MediaPortal...
Ok I have installed MediaPortal with mediastream skin and XBMC with mediastream skin. When I play a movie with MP the cpu usage at 35%-60% and it plays fine. When I play the same movie with XBMC the cpu usage is at 95%-100% and it plays fine also. So I can actually use both. MP seams to use less resources. So I am going to setup the...
Ok I have installed MediaPortal with mediastream skin and XBMC with mediastream skin. When I play a movie with MP the cpu usage at...
Ok, first I am not trying to start a bad thread.
I have a older computer that I want to make an HTPC out of.
Here are the...
Hi Steppzor,
nice to hear that MP satisfied you, but what do you mean with CI Tool?
Maybe that tool can help other members too.
Hi Steppzor,
nice to hear that MP satisfied you, but what do you mean with CI Tool?
Maybe that tool can help other members too.
I had my first run at MediaPortal about a year ago and was not happy about it at all.. Channels where choppy.. menu was sluggish...
I should imagine so, if you have the right codecs installed. Assuming they play in WMP then they should, just make sure that .wtv is added to the list of video extensions.
The other option is to convert them to dvr-ms and then to mpeg-4 (XviD in an .avi container) Converting WTV files this is a commandline tool to convert to dvr-ms...
I should imagine so, if you have the right codecs installed. Assuming they play in WMP then they should, just make sure that .wtv...
Hi all,
Just wondering if MediaPortal can do the following as I've lost a few functions I used quiet a bit when I "upgraded" my...
then i using hauppauge remote my win tv remote controller icon fades then i start mediaportal.
Only then i have set my options to hauppauge in settings, can any help me out.
then i using hauppauge remote my win tv remote controller icon fades then i start mediaportal.
Only then i have set my options to...
then i using hauppauge remote my win tv remote controller icon fades then i start mediaportal.
Only then i have set my options to...
Hi.
I am using the XMLTV and the Power Scheduler Plugins with TV server 1.0.2.
And they work until I re-boot the system.
After a reboot I find that in the TV Server Log ditrectory the error File contains the following;
2009-06-24 19:16:27.703125 [Powerscheduler Timer]: Exception :System.ArgumentOutOfRangeException: The...
Hi.
I am using the XMLTV and the Power Scheduler Plugins with TV server 1.0.2.
And they work until I re-boot the system...
Hi.
I am using the XMLTV and the Power Scheduler Plugins with TV server 1.0.2.
And they work until I re-boot the system...
How do you go about creating and managing playlists for My Music?
How do you go about creating and managing playlists for My Music?
How do you go about creating and managing playlists for My Music?
What kind of tv tuner card do you recomend.
What kind of tv tuner card do you recomend.
Hello there i need some help i just downloaded media portal software and install all the programs needed. Now i do not know what is...
If you are using ffdshow audio be sure to run MediaPortal Configuration and:
Videos>Video Post Processing>add ffdshow Audio Decoder
Filter properties: enable stream switcher
If you are using ffdshow audio be sure to run MediaPortal Configuration and:
Videos>Video Post Processing>add ffdshow Audio...
I might be missing the obvious, but is there a way to select the audio stream when playing a file. Got some files that have...
I am actually Sage here.. Friend of Bobalicious..
Problem turned out to be with the MPTV plugin loading HUGE fanart each time a new episode was selected. Removed fan art.. problem solved.
I am actually Sage here.. Friend of Bobalicious..
Problem turned out to be with the MPTV plugin loading HUGE fanart each time a...
Any thoughts on this one guys?
Fresh install of 1.02?
Dual Core 1.8Ghz
2GB RAM
64mb Dedicated Radeon x1300 gfx card.
XP...
I have read several questions about getting .ts videos to play in Mediaportal, but have not found any clear cut solutions. Sorry if I missed them
Here is what I have done.
Fresh XP Pro install, all windows updates. installed all requirements for mediaportal 1.1, i first tried 1.0.2
.ts by default is in the extensions list...
I have read several questions about getting .ts videos to play in Mediaportal, but have not found any clear cut solutions. Sorry...
Hi,
on this link, you can find a piece of video (8,7MB TS file) I've recorded with MediaPortal.
I can play that piece of...
The bottom two white slots are the pci slots
I believe, the other two are pci-e.
HTH
The bottom two white slots are the pci slots
I believe, the other two are pci-e.
HTH
I have tried to set it up so much but it just doesn’t work for me. Can someone give me a guide to setting it up please? Also there...
Hi. Yeah the card is installed and the software that came with it works 100's. I have installed all the pre-requsits for MP and proceeded to install MP 1.0.2 and the TV Server Engine. When configuring the Television settings and adding the card I get an message "No Capture Cards Found" or something to that extent. This also happened...
Hi. Yeah the card is installed and the software that came with it works 100's. I have installed all the pre-requsits for MP and...
Hi all, been looking around and could not find out any help for this card. Also I am not to sure if this is the right place to post...
If i start MP Configuration in the "standard mode" then i do see the "Powerscheduler Client Plugin" in the "Plugins Section".
I have also moved this thread because it is nowhere near to be a bugreport.
::Read and follow the guidelines:: when reporting, or the thraed might be deleted. :thx:
If i start MP Configuration in the "standard mode" then i do see the "Powerscheduler Client Plugin" in the "Plugins Section".
I...
I could not find MP power scheduler in MP config. And had trouble with standby going off prematurely. I later found it under...
Moved this thread because this is nowhere near to be a bugreport.
Be aware that if you do not follow the guideline, ::threads will be deleted::.
You need to choose "TV" in installation or there will be no TV nor Radio.
Moved this thread because this is nowhere near to be a bugreport.
Be aware that if you do not follow the guideline, ::threads will...
Hello,
i have 3 little questions about MediaPortal 1.1.0 ALPHA.
1. I miss the VU Meter. If i understand everything the VU...
do a search on the forum for imon remote. Theres plenty of info on how to set it up.
do a search on the forum for imon remote. Theres plenty of info on how to set it up.
:D Hello to all,
Very glad to have learnt about the Media Portal software, it's quite a treat =))
OK, I have purchased the...
MP config\general\keys & sounds, you can associate any noise you like :)
MP config\general\keys & sounds, you can associate any noise you like :)
Hi Guys,
I'm getting an odd problem where video sometimes skip forward or backwards.
The odd problem is that it always seems...
Thought I might get in my 2 cents worth. Started with MP last year and have been impressed with it - can view everything i have and mostly TV has been good except for recently when the stuttering has plagued things.
Thought I would give W7 a shot with MC - never used it before because it doesn't get NZ DVB-T. Like you say, easy to...
Thought I might get in my 2 cents worth. Started with MP last year and have been impressed with it - can view everything i have and...
Hello
I used Media portal without a TV card when it was in the early stages and liked it very much and couldn't wait to use it...
Maybe you switched from shares view to database view?
Also attach screenshot - see question B8 here.
Maybe you switched from shares view to database view?
Also attach screenshot - see question B8 here.
I have an issue with videos where I can see all my video files in explorer but not in MP , they used to play in MP but they are now...
what do yr logs say?
what do yr logs say?
first sory my english
My sistem is
LGk410
P8600
9300m gs
vista sp1 + media portal
mediaportal open but...
what do yr logs say?
what do yr logs say?
hey i am playing 1080p mkv movies in mediaoportal, there are some movies the will stop at a scene and it goes back to my...
Can you be a little more specific as to what exactly the problem is? There is a music forum here where you may get better support. The scan process extracts the embedded art and places it in \Program Data\Team MediaPortal\MediaPortal\thumbs\Music. You may want to have a look there. Also, you will be asked for logs. So, clear out the...
Can you be a little more specific as to what exactly the problem is? There is a music forum here where you may get better support...
Okay..I just finished installing Mediaportal a while back, and now I'm having trouble with it reading embedded album art in the iD3...
Thanks for the info...I added my beyondtv video dir into MP and enabled the "skip commercials if comskip txt file available" in the config and it does appear to do that..the problem I ran into was that the .avi's that play fine in beyondtv are playing with the audio and video not in sync in mediaportal so still stuck playing them in...
Thanks for the info...I added my beyondtv video dir into MP and enabled the "skip commercials if comskip txt file available" in the...
I'm a BeyondTV/Media user and I've been giving a peak to MP for a while now. The open platform and the community are really...
That is unticked already. I think its in general settings though.
btw my mouse won't auto hide either. (found the fix for that here https://forum.team-mediaportal.com/newcomers-forum-240/dreaded-mouse-cursor-58197/index3.html)
Ahhh..... Its doesn't work when there is a moving image (TV or Video etc) playing but works when its just...
That is unticked already. I think its in general settings though.
btw my mouse won't auto hide either. (found the fix for that...
I did a reinstall and now I can't see the popup context menu for my remote (external application) Same with the volume green bars...
Hi, I've just set up MP with a Hauppage Nova S Plus DVB-S card, and managed to tune all the local TV and Radio Channels ok. I can preview the radio channels fine in the TV Server setup, but can only get sound out of a few of them within MP itself. Anyone know why that might be? When I select a channel it eventually pops up a message...
Hi, I've just set up MP with a Hauppage Nova S Plus DVB-S card, and managed to tune all the local TV and Radio Channels ok. I can...
Hi, I've just set up MP with a Hauppage Nova S Plus DVB-S card, and managed to tune all the local TV and Radio Channels ok. I can...
xmltv and power scheduler
Hi,
Additionally.... If you use XMLTV and scheduler together.... I was pained with the effort to get the import to work. I had scheduled a dummy tv record to run, with a XMLTV grad set for 5 minutes later.... But this morning, I found a plugin under the Media Protal config ( as opposed the TV server)...
xmltv and power scheduler
Hi,
Additionally.... If you use XMLTV and scheduler together.... I was pained with the effort to get...
Im trying to setup /test the Powerscheduler....
And have not had any luck!
Leaving the P.C. unattended for a period exceeding...
Part of the problem also comes in, which again is internet related, all the databases work on downloading information from the net to work properly, so your experience with MP will be a bit disappointing from a visual aspect, as no info for movies, or albums, and of course 2 of the most popular plugins, Moving Pictures, MP-TVSeries...
Part of the problem also comes in, which again is internet related, all the databases work on downloading information from the net...
Hi,
I'm new here so please bear with me
I have been only successful to install MP on a windows7 OS, i have tried installing...
Is the asnwer here...
Hi,
i started the other forum, and initially founf=d the same error.
It appears (and correct me developers if I am wrong) that your definition needs to be inside the 24 hour window.
I had originally defined a window for suspend from 18 to 07 so say that outside our normal home p.c. usage, you can power it...
Is the asnwer here...
Hi,
i started the other forum, and initially founf=d the same error.
It appears (and correct me developers...
Hi All
Just made the move from Vista Media Centre to MediaPortal and simply cant get the MP software to suspend or resume. I've...
How to submit a support thread
How to submit a support thread
No idea what's going on here. Help please?
External players work but they are clunky, and changing codecs makes no difference in...
Hi there :)
There is a community member currently doing some work on pictures.
https://forum.team-mediaportal.com/view-pictures-109/what-should-i-add-mypictures-66481/
https://forum.team-mediaportal.com/view-pictures-109/mypictures-initial-zoom-wrong-59276/
Hi there :)
There is a community member currently doing some work on pictures...
Is there a way or plugin to make the "My Pictures" slideshow automatically make all pictures fit the screen, or at least...