Newcomers Forum (188 Viewers)

Newcomers to MediaPortal may start here with their questions
AW: UnableToStartGraph when starting MP second time. Anton, the posted information is OK, except for the missing debug level :-) How did you set up your system, single-seat or client/server? It appears that for some reason MP can no longer connect to the server because the access is blocked. Judging from the log you are running...
AW: UnableToStartGraph when starting MP second time. Anton, the posted information is OK, except for the missing debug level...
I'm trying to setup MediaPortal but I have run into a problem with a message stating: "Kan ikke starte tidsforskudt optagelse"...
Replies
1
Views
1K
MP1 MP2 Compro VideoMate S350 (1 Viewer) DE
Please provide me the Capture Graph detail as well. Logy@iatglobal.co.za Please will appreciate this.
Please provide me the Capture Graph detail as well. Logy@iatglobal.co.za Please will appreciate this.
Been trying to get my Compro VideoMate S350 working in MediaPortal under Vista 32bit, Followed the thread in MediaPortal Wiki from...
Replies
5
Views
2K
Re: AW: Problem with previewing channels I have updated the system configuration. If u need any other info do not hasitate to ask.
Re: AW: Problem with previewing channels I have updated the system configuration. If u need any other info do not hasitate to ask.
I'm having trouble with preview on any channel, it gives me an error: Preview failed: GraphBuildingFailed I have mapped the...
Replies
2
Views
1K
MP1 MP2 CAID DE
Hello... I have question about change CAID (ca_id) in tv dvb-s config. Can i change this value for example: conax - 0100 to nagravision 1801??
Hello... I have question about change CAID (ca_id) in tv dvb-s config. Can i change this value for example: conax - 0100 to...
Hello... I have question about change CAID (ca_id) in tv dvb-s config. Can i change this value for example: conax - 0100 to...
Replies
0
Views
971
Just moved up to RC4 - looking good so far! For some reason however, I cannot get the DVB EPG to come up for Film4. All other channels appear fine. I have tried unselecting all channels and setting it up again, but still no Film4. Is there any line of code I can check where Film4 might be missing? Thanks
Just moved up to RC4 - looking good so far! For some reason however, I cannot get the DVB EPG to come up for Film4. All other...
Just moved up to RC4 - looking good so far! For some reason however, I cannot get the DVB EPG to come up for Film4. All other...
Replies
0
Views
783
Thanks for the feedback - it might help others as well :)
Thanks for the feedback - it might help others as well :)
The analogue part of the Cinergy HTC USB XS HD card doesn't work with MP. (DVB-C and DVB-T is not a problem, both work) The...
Replies
2
Views
2K
L
MSI GForce 8600 GTS (HDMI output to TV) PC monitor @ 1440x900 TV (Extended Desktop) @ 1280x720 Have always ran it like this and not sure why mediaportal is doing this suddenly. Here are some screenshots. This scenario exists both on XP and Windows 7 (fresh installations).
MSI GForce 8600 GTS (HDMI output to TV) PC monitor @ 1440x900 TV (Extended Desktop) @ 1280x720 Have always ran it like this and...
Have been using MP for a couple of years now and last night the menu is now stretched past the monitors width. I have checked the...
Replies
2
Views
809
Updated everything to RC4 this morning. Everything seems to be working OK for some reason.:thx:
Updated everything to RC4 this morning. Everything seems to be working OK for some reason.:thx:
This is driving me round the bend now and I have run out of things to try. Virgin 1+1 announced that it was going off air at the...
Replies
1
Views
2K
MP1 MP2 DVD will not play DE
I can see no tentative of playing a DVD in your logs. Could you please use the debug tool to collect logs? Launch debug tool, launch mediaportal, try to reproduce a DVD, close MP and post the generated zip file.
I can see no tentative of playing a DVD in your logs. Could you please use the debug tool to collect logs? Launch debug tool...
OS:Windows 7 32bit MediaPortal:RC3 (1.0.6.25542) Codec: Shark 007 DvD codec: Cyberlink PDVD9 CPU: P4 3.2 RAM: 4gig Video...
Replies
3
Views
1K
F3 on keyboard or Info button on remote. Then select Reset Watched Status. Or for TV Series, choose Toggle Watched.
F3 on keyboard or Info button on remote. Then select Reset Watched Status. Or for TV Series, choose Toggle Watched.
Hi, as the title says I'd like to know whether this is possible. I watch many tv shows and now I'd like to watch them again and...
Replies
1
Views
1K
Hi rekenaar, show gui also does not work...it's fine i've given up...i've got a workaround so that will have to do :) stop movie...then select same movie and resum where i lef off... :)
Hi rekenaar, show gui also does not work...it's fine i've given up...i've got a workaround so that will have to do :) stop...
Hi all using the stable version of MP... I cannot fullscreen a movie once i press the back buttons... someone said i should use...
Replies
13
Views
3K
Diebagger, Thank you - very politely put, will follow the guidelines. Geeza
Diebagger, Thank you - very politely put, will follow the guidelines. Geeza
Hello, I can only get TV to work in MP 1.1.0 RC1, every version since results in "Unknown Error has occurred" although all...
Replies
3
Views
1K
For the moment, I have a Gigabyte GA-GC230D motherboard for my media center (that is also a home server, so it's always on). I'd like to change that because it was OK as a home server, but now that I use it as media center too, it feels a bit weak. I'd like to be able to play videos smoothly, possibly in HD, to play SNES and N64...
For the moment, I have a Gigabyte GA-GC230D motherboard for my media center (that is also a home server, so it's always on). I'd...
For the moment, I have a Gigabyte GA-GC230D motherboard for my media center (that is also a home server, so it's always on). I'd...
Replies
0
Views
2K
Sorry, it's not system idle, it just says "system", I assumed they were the same thing, but idle doesn't show up in the Resource Monitor.
Sorry, it's not system idle, it just says "system", I assumed they were the same thing, but idle doesn't show up in the Resource...
Hey all, I've not had much time recently to suss out my MP problem but last night as I was watching LOST I made a discovery what...
Replies
10
Views
2K
Cool...if I ever get this LCD I'll remember to come and bug you to find out how to make it work :)
Cool...if I ever get this LCD I'll remember to come and bug you to find out how to make it work :)
Hey everyone, I figured I should record what the Matrix Orbital GX24064 Typhoon and Media Portal using the miniDisplay plugin...
Replies
1
Views
2K
That doesn't help if you have connection problems. DeployTool will fail as soon as the connection is dropped and you have to start again. You should be able to place the packages in \Local Settings\Temp\MediaPortal Installation\deploy folder and let the installer run though I've never tried it. Whenever I upgrade I have to...
That doesn't help if you have connection problems. DeployTool will fail as soon as the connection is dropped and you have to start...
Hey all... I dont have the best internet connection around, which is causing the component download section of the installation...
Replies
3
Views
1K
I see, :thx: for the info. At least I know it's in the planning ;)
I see, :thx: for the info. At least I know it's in the planning ;)
Hi, Are there any plugins (or options on the "infoservices" plugin that I don't know) that can announce rss news while watching...
Replies
2
Views
927
MP1 MP2 Problem with skin DE
Updated the graphics driver and everything working again. Thanks for the advice.
Updated the graphics driver and everything working again. Thanks for the advice.
Hi my first on here, wasn't to sure were to post up but I'll give it ago. Firstly, great product, for open source def is...
Replies
3
Views
1K
Note: this is for MediaPortalSetup_1.1.0_RC-2_rev25546 (my system settings hasnt been updated yet) The TV Server service dies every couple of days and I get this error in the error.log: 2010-05-26 20:44:18.222110 [(19)]: Scheduler: Schedule Frontline (EP00001762.2810.) has already been recorded but the file is invalid (Exception of...
Note: this is for MediaPortalSetup_1.1.0_RC-2_rev25546 (my system settings hasnt been updated yet) The TV Server service dies...
Note: this is for MediaPortalSetup_1.1.0_RC-2_rev25546 (my system settings hasnt been updated yet) The TV Server service dies...
Replies
0
Views
1K
MP1 MP2 DVB-S DE
I have DVB-S PCI Satellite Card in my computer My question is can i use cardsharing Technology for NilSat through this card. if Yes than How please THanks
I have DVB-S PCI Satellite Card in my computer My question is can i use cardsharing Technology for NilSat through this card. if...
I have DVB-S PCI Satellite Card in my computer My question is can i use cardsharing Technology for NilSat through this card. if...
Replies
0
Views
790
E
Will guide info all be automatic when I install, with some type of setup wizard asking me my location and setting up the appropriate guide? The setup can tune the channels automatically, but you will have to manually setup the epg data Does it do any commercial/chapter marking so I can easily skip commercials (like beyond tv's...
Will guide info all be automatic when I install, with some type of setup wizard asking me my location and setting up the...
I currently use a combination of BeyondTV for Recording/Watching TV (from two ATSC tuners, using an antenna, in the US), XBMC for...
Replies
4
Views
3K
U
hint, with 2 channels recording on 2 different transponders, open the miniguide, there you will see available and non available channels listed that you can record\watch, not available channels tend to have the road sign "no entry" or a red symbol on them.
hint, with 2 channels recording on 2 different transponders, open the miniguide, there you will see available and non available...
Hi there. I've just downloaded and installed RC3, and its great. I have 2 tv tuner cards running from a single antenna. I always...
Replies
2
Views
1K
MP1 MP2 Video Off Center DE
I can not get moving pictures or tvseries to center correctly. I flip though all the aspect ratios and the only one that shows the entire video is "Original" All the others are cutting some of the right side of the video off. I don't know what can be changed. Suggestions? The man navigation screen works perfect, its just the...
I can not get moving pictures or tvseries to center correctly. I flip though all the aspect ratios and the only one that shows the...
I can not get moving pictures or tvseries to center correctly. I flip though all the aspect ratios and the only one that shows the...
Replies
0
Views
744
Hi. You need to provide log as intructed here. MEDIAPORTAL - free media center - Reporting bugs becomes a lot easier in 1.1.0 RC3 That is only way team members can help you. Br,
Hi. You need to provide log as intructed here. MEDIAPORTAL - free media center - Reporting bugs becomes a lot easier in 1.1.0...
Hi there! I have a "little" problem. I find all my channels in TV-server configuration, and I can see them in channel...
Replies
1
Views
1K
Hi, Sorry I sent an accidental message so I am posting this message in it's place to edit it. I forward to your comments on my last two posts above thanks. Regards Richard.
Hi, Sorry I sent an accidental message so I am posting this message in it's place to edit it. I forward to your comments on my...
Hi Do you know of any user friendly free TS file editors or is it possible to configure Media Portal to record in a format other...
Replies
22
Views
16K
Hello I have some free software I downloaded at SUPER &copy and I also heard that Projectx can convert file formats. Do you know if MCE Buddy has any advantages over these? The only thing with using another program to reduce the size is that it is an extra step to do and when files are edited or converted with some programs, the...
Hello I have some free software I downloaded at SUPER &copy and I also heard that Projectx can convert file formats. Do you know...
Hello Is it possible to record a TV program with Media Portal so that the size of the recorded file takes up less disc space? I...
Replies
7
Views
2K
Forum/How_to_post_logs - MediaPortal Manual Documentation Pretty sure Maya will support MediaSlayer in the end, but you can probably use the Blue3-files
Forum/How_to_post_logs - MediaPortal Manual Documentation Pretty sure Maya will support MediaSlayer in the end, but you can...
Hello In the MP-Config is the key "D" linked to CD importing. But wehn i play a cd and press D nothing happens. I just want to...
Replies
3
Views
1K
No problem, we all try to help each-other...:)
No problem, we all try to help each-other...:)
Hi guys Im relatively new to Media portal and by no means a technical person,so bear with me. On that note..My problem is as...
Replies
3
Views
2K
MP1 MP2 Recording Stopped (1 Viewer) DE
When it is ready ;), and that is a serious answer, it is not known yet.
When it is ready ;), and that is a serious answer, it is not known yet.
Hi All, Occasionally I have recordings which stop ..... and they always happen on my wifes shows ... so tonight I'm in the...
Replies
6
Views
1K
Thanks.
Thanks.
Is it possible to backup my media portal settings,so in future if i have to do a format and fresh install i don't have to download...
Replies
2
Views
1K
Top Bottom