Problems with the TV-Server or MyTV frontend? Post them in here.
Hi,
Is there a way to make TVserver Beta remember the audio pid that you selected last time you watched that chanel.
it's annoying that every time you go to a chanel you watch all the time, you have to keep changing the audio stream back to the one you want.
I would like to add at this point that this really is such a good bit...
Hi,
Is there a way to make TVserver Beta remember the audio pid that you selected last time you watched that chanel.
it's...
Hi,
Is there a way to make TVserver Beta remember the audio pid that you selected last time you watched that chanel.
it's...
TV-Server Version: 08-25-2007--01-23h--Rev15641
MediaPortal Version: svn--08-25-2007--01-02-Rev15641
MediaPortal Skin: bluetwo
Windows Version: WinXP Home SP2 (up-to-date as of last week)
CPU Type: AMD Sempron 2200+
HDD: 40GB
Memory: 1GB
Motherboard: MSI K7N2
Motherboard Chipset: nForce 2
Motherboard Bios:
Video Card: GeForce FX 5200...
TV-Server Version: 08-25-2007--01-23h--Rev15641
MediaPortal Version: svn--08-25-2007--01-02-Rev15641
MediaPortal Skin: bluetwo...
TV-Server Version: 08-25-2007--01-23h--Rev15641
MediaPortal Version: svn--08-25-2007--01-02-Rev15641
MediaPortal Skin: bluetwo...
Hi!
I would like to know is it possible to start more than one program manualy...
Here is what I want to do: I want to start 4 programs that are on one transporter and want to reencode them with VLC...
I know I can make one, but I want all 4 of them...
Hi!
I would like to know is it possible to start more than one program manualy...
Here is what I want to do: I want to start 4...
Hi!
I would like to know is it possible to start more than one program manualy...
Here is what I want to do: I want to start 4...
Yes it´s really to simple for me
Thank You.
I will try this
Yes it´s really to simple for me
Thank You.
I will try this
TV-Server Version: TVE 3 #15546
MediaPortal Version: 0.2.3.0 RC1 SVN#15546
MediaPortal Skin: PM3
Windows Version: XP SP2
CPU...
I'm wondering how to remove SVN-builds! By mistake I installed RC1 on my laptop - should have installed 2.2.0 instead. After I have removed the R1 2.3.0 the 2.2.0-version runs with the SVN-build for the RC1/2.3.0 application.
Also I think that the settings I have done in TV Server is wrong. I Installed and use two different...
I'm wondering how to remove SVN-builds! By mistake I installed RC1 on my laptop - should have installed 2.2.0 instead. After I have...
I'm wondering how to remove SVN-builds! By mistake I installed RC1 on my laptop - should have installed 2.2.0 instead. After I have...
Hi,
My disney channels broadcast in 4 languages, TVe3 single seat can see 4 languages and change between them. Clients connected to the same server can see all 4 languages but they are unable to change the audio stream. It changes and the audio cuts for a second, then it reverts back to audio 1.
Any idea?
Hi,
My disney channels broadcast in 4 languages, TVe3 single seat can see 4 languages and change between them. Clients connected...
Hi,
My disney channels broadcast in 4 languages, TVe3 single seat can see 4 languages and change between them. Clients connected...
thanks
PickPocket
i have to instal the tsreader can you give me a link to download it
ok i have it
cheers
PP
thanks
PickPocket
i have to instal the tsreader can you give me a link to download it
ok i have it
cheers
PP
What do I have to do to get the Prefer AC3 option to work?
Simply checking seems not enough as I stil get no AC3 by default...
Same here. Without that option the whole TVService seems to be broken after wakeup, but enabling
seems to fix it reliable.
grubi.
Same here. Without that option the whole TVService seems to be broken after wakeup, but enabling
seems to fix it reliable.
grubi.
Is there any information available how the two PowerSchedulers (MP + TVserver) interact on a single seat setup. What I want to...
Maybe you just need to configure the option "Turn on TV when resuming from standby" in Configuration.
That did the trick for me!
cheers
joystick
Maybe you just need to configure the option "Turn on TV when resuming from standby" in Configuration.
That did the trick for me...
Did anybody know how i can reset/restart monitor when the TVServers wakeup stand by or hibernate state?
I use now VGA cable...
Im using the Tv server in a single seat configuration, and i know that zap2it is ending on 9/1 but im using it now until it ends. I cant seem to get the zap2it plugin in tvserver to pull the data and put it into the client. I can watch tv on the client but not get the tvguide.
Im using the Tv server in a single seat configuration, and i know that zap2it is ending on 9/1 but im using it now until it ends. I...
Im using the Tv server in a single seat configuration, and i know that zap2it is ending on 9/1 but im using it now until it ends. I...
Is this by design or a bug that under tv -> recordings -> compression no recordings are displayed when using TVEngine3? Works properly without TVEngine
grubi.
Is this by design or a bug that under tv -> recordings -> compression no recordings are displayed when using TVEngine3? Works...
Is this by design or a bug that under tv -> recordings -> compression no recordings are displayed when using TVEngine3? Works...
Hello;
When i discovered mediaPortal a few days ago, i was wondering,
It was just a fantastic program, i get movies with subtitels, radio's, everything workes fine,
I decided to move my pc to the living room, for setting up my mediaPortal on TV.
Today, I tried to get my TV-Card worked,
But, mediaPortal says: "No video...
Hello;
When i discovered mediaPortal a few days ago, i was wondering,
It was just a fantastic program, i get movies with...
Hello;
When i discovered mediaPortal a few days ago, i was wondering,
It was just a fantastic program, i get movies with...
I tend to sort the TV Channels master list, then go to TV Groups option, delete the All Channels group, recreate a new All Channels group and then on the mapping tab I can add all the sorted master list to that group.
I tend to sort the TV Channels master list, then go to TV Groups option, delete the All Channels group, recreate a new All Channels...
Hi all
Im having problem with sorting the channels.
When i change channel order in TV server it does not work in MP.
when...
@SkiDoctor
I'm running XP.
Seems that I have to spend one additional GB to get things work with TVServer3.
When I remeber what we did with 32KB of RAM about 20 years ago when I started with sw development I sometimes ask myself what it is all good for. (For the youngsters here "KB" is not a typo it is a measure for memory...
@SkiDoctor
I'm running XP.
Seems that I have to spend one additional GB to get things work with TVServer3.
When I remeber...
What are your experiences for RAM requirements when running a single seat setup.
I have a machine with 1 GB of RAM which ran...
Keep in mind that you need .NET Framework 3.0. I guess the video tutorial is speaking of 2.0 but that has been changed.
Keep in mind that you need .NET Framework 3.0. I guess the video tutorial is speaking of 2.0 but that has been changed.
What files (links plz) do I need to get TVE3 to work?
In what order do I install them?
Does it create problems to connect with...
Thank you for the link!
I saw a post in the thread that you shold work on to get the teletext subtite in the filter...
I am one those who has Canal + who uses teletext subtitle....
Have you been started with that ?
Best Regards
//M
Thank you for the link!
I saw a post in the thread that you shold work on to get the teletext subtite in the filter...
I am one...
Hi !
Hi i have a TV-server installed and using 2 MP clients...
My Questions are...
Is there any SVN yet who gives the...
Have you tried using the new .ts filter? Check it out: https://forum.team-mediaportal.com/help_us_testing_new_filter-t24998.html
I had the same issue, but this made it start working.
Have you tried using the new .ts filter? Check it out: https://forum.team-mediaportal.com/help_us_testing_new_filter-t24998.html
I...
Several months ago, I was a regular user of MP, and decided to switch over to TVEngine. I was hit with the same problem of "no...
Response to your question
Hi there.
What I am referring to is a problem were if the TV server is down and I try to start the clients configuration application. The app takes 10 to 15 minutes to actually appear on the screen as an active application. I discovered this becuase I have MP on a laptop that I take to work. During lunch I...
Response to your question
Hi there.
What I am referring to is a problem were if the TV server is down and I try to start the...
Two questions
first. I sthere a trick to getting the client PC's configuration app to start when the TV Server is down. It seems...
works great! thank you very much!
cheers
joystick
works great! thank you very much!
cheers
joystick
TV-Server Version: latest svn
MediaPortal Version: latest svn
MediaPortal Skin: spinsafe revolve
Windows Version: xp pro Sp2...
*bump*
*bump*
TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version: Windows MCE + updates
CPU Type: Athlon 64 3500+...
Solution was simple: the sat cable was broken, there was probably a short circuit. I replaced it and everything works like a charm using simpleA / simpleB settings for hotbird/astra.
Solution was simple: the sat cable was broken, there was probably a short circuit. I replaced it and everything works like a charm...
TV-Server Version: 0.3 latest svn
MediaPortal Version: 0.3.1RC + latest SVN
MediaPortal Skin: bluetwo
Windows Version: XP SP2...
I have a Problem with Streaming the TV to the client.
I have installed the server and client on my htpc and the client only on my working pc.
When i want to watch from the working pc the picture comes up 1 second an then it freeze...
I have tried to watch via Vieod Lan an the picture is jerking all the time...
I have a 100...
I have a Problem with Streaming the TV to the client.
I have installed the server and client on my htpc and the client only on my...
I have a Problem with Streaming the TV to the client.
I have installed the server and client on my htpc and the client only on my...
From the cangelog it seems the 15605 rev has fixed this problem.
From the cangelog it seems the 15605 rev has fixed this problem.
TV-Server Version:
MediaPortal Version: 0.2.3.0 RC1
MediaPortal Skin: PM3
Windows Version: XP SP2
CPU Type: Athlon64 X2 3800EE...
TV-Server Version: TVEngine3 Snapshot: 08-18-2007 01-23h Revision 15586
MediaPortal Version: MediaPortal SVN-Snapshot: 08-18-2007 01-01h - Revision:15586
MediaPortal Skin:
Windows Version: Windows XP SP2
CPU Type: Ahtlon XP 2500
HDD: 500GB Seagate
Memory: 1024MB
Motherboard: ASUS
Motherboard Chipset: NVIDIA NForce
Video...
TV-Server Version: TVEngine3 Snapshot: 08-18-2007 01-23h Revision 15586
MediaPortal Version: MediaPortal SVN-Snapshot: 08-18-2007...
TV-Server Version: TVEngine3 Snapshot: 08-18-2007 01-23h Revision 15586
MediaPortal Version: MediaPortal SVN-Snapshot: 08-18-2007...
Deleted. Problem solved
Deleted. Problem solved
Deleted. Problem solved
Grabbing EPG from DVB runs very smooth in MediaPortal. Why does it
run so ugly in TVServer? I know that grabbing only occurs when there
is no activity on the card however even after waiting for a long time
I don't see any epg data in TV-Server. Looking at the epg.log there
you can only the the following lines:
19.08.2007 22:44:19 C...
Grabbing EPG from DVB runs very smooth in MediaPortal. Why does it
run so ugly in TVServer? I know that grabbing only occurs when...
Grabbing EPG from DVB runs very smooth in MediaPortal. Why does it
run so ugly in TVServer? I know that grabbing only occurs when...
So you don´t find the "mytv" in the Config or in Mediaportal itself?
So you don´t find the "mytv" in the Config or in Mediaportal itself?
TV-Server Version:
I'm working on one PC with MSQL-server/Tvserver/plugin and MP
During the install of Tvserver the database...
Hi there,
I have the same setup as you Wizzard and had the same problems. I solved it today by installing ForceWare 93.71 here http://www.nvidia.com/object/winxp_2k_93.71.html (uninstall the newer drivers first).
If you are still having problems, download and install the KLite Codec Pack with the Cyberlink MPEG2 decoder. I've found...
Hi there,
I have the same setup as you Wizzard and had the same problems. I solved it today by installing ForceWare 93.71 here...
TV-Server Version: 04-07-2007 01-23h Revision 13880
MediaPortal Version: 04-07-2007 01-03h - Revision:13879
MediaPortal Skin: Blue...
Im using a multi seat configuration of MP, I finally get everything set up and I go to my client, type in the ip of the server, it says Connected to TV Server then if I try to go back or anything it instantly locks up MP. Am I doing something wrong?
Im using a multi seat configuration of MP, I finally get everything set up and I go to my client, type in the ip of the server, it...
Im using a multi seat configuration of MP, I finally get everything set up and I go to my client, type in the ip of the server, it...
The issue appears to be the ECP II plugin that came with PVR scheduler, once I disabled this it came up fine.
Looks like new SVN is conflicting with somethihg the ECP II plugin was was already using.
The issue appears to be the ECP II plugin that came with PVR scheduler, once I disabled this it came up fine.
Looks like new...
TV-Server Version:
MediaPortal Version: 0.2.2 SVN 15426 (TVServer 3/8/2007)
MediaPortal Skin: Blue Two
Windows Version: Windows...