PureVisionHD 1080 DriveFreeSpace (3 Viewers)

catavolt

Design Group Manager
  • Team MediaPortal
  • August 13, 2007
    15,138
    12,074
    Königstein (Taunus)
    Home Country
    Germany Germany
    @High_Five @framug
    Hehe, here the first impressions of new page DriveFreeSpace in Settings -> General:

    18-28-35.jpg 18-28-39.jpg

    Of course I will do it nice and with most info as possible - give me some time please ;)
     

    High_Five

    Design Group
  • Team MediaPortal
  • February 10, 2023
    354
    1,464
    Home Country
    Germany Germany
    Beautifully designed and informative graphics, but because of the wealth of information, it might be clearer to split the text and choose the drive designation as the heading in each case, especially if more drives are added.
     

    catavolt

    Design Group Manager
  • Team MediaPortal
  • August 13, 2007
    15,138
    12,074
    Königstein (Taunus)
    Home Country
    Germany Germany
    it might be clearer to split the text and choose the drive designation as the heading in each case, especially if more drives are added.
    The text shown comes from only 1 (!) property of DriveFreeSpace and is the text you configure in the plugin itself - so the less data you configure, the less text is shown. There are no separate properties for the different information (like disk space total, used space, free space etc.)
    Screenshot shows my configuration, other users may use other configuration.
     

    catavolt

    Design Group Manager
  • Team MediaPortal
  • August 13, 2007
    15,138
    12,074
    Königstein (Taunus)
    Home Country
    Germany Germany
    Well, I decided for a maximum of 8 drives available (screenshot uses 4 times same drive C to show "full load").
    Finally I will add the respective visibility options to only show the really available drives.
    That´s it for today - have a good night ;)

    23-06-45.jpg
     

    catavolt

    Design Group Manager
  • Team MediaPortal
  • August 13, 2007
    15,138
    12,074
    Königstein (Taunus)
    Home Country
    Germany Germany
    Well, finally I changed my mind and desided for only 6 drives ;)
    In DriveFreeSpace config I now use this construct:

    %drive% %labelbrackets%
    %totalspace% GB gesamt / %usedspace% GB belegt
    %freespace% %unit% frei (%fspercent%%)
    (für ca. %rectimeleft% Std. HD)

    so there are 4 lines of text shown.

    I also changed the sequence of display now from left to right (means drives C and D in 1st row, E and F in second row, G and H in third row)

    I added visibility conditions to not show unavailable drives.

    At the moment I´m looking for a possibility to make the drive letters not hardcoded, but maybe with a switch option, so even drives with other letters then C,D,E,F,G,H would be shown automatically (e.g. M, Z etc.)

    Well, that´s all for today - attached a screenshot and the new settings_general.xml for you to test ;)

    11-49-59.jpg
     

    Attachments

    • settings_general.xml
      34.2 KB

    framug

    Super Moderator
  • Team MediaPortal
  • January 31, 2005
    6,322
    2,498
    South of France
    Home Country
    France France
    • Thread starter
    • Moderator
    • #29
    At the moment I´m looking for a possibility to make the drive letters not hardcoded, but maybe with a switch option, so even drives with other letters then C,D,E,F,G,H would be shown automatically (e.g. M, Z etc.)
    Hello,
    Yes, it would be great beacause, with an example with F: and G: as removeable disks :

    zz1.png

    Otherwise (y)
     

    Users who are viewing this thread

    Similar threads

    MP1 MP2 EPG woes DE
    I had the same problem, I have got it working with EPG123 and batch files to rename move. Only issue is it didn't do time correction so I had to apply +1 in MP2, and when the clocks just changed back I had to then remove the +1. Not ideal and not as plug and play as MC2XML but got ti working before the wife noticed. As it is I had...
    I had the same problem, I have got it working with EPG123 and batch files to rename move. Only issue is it didn't do time...
    Does anyone know how to “fix” the MC2XML application, and hopefully permanently? Mine stopped working sometime after September 29...
    Replies
    19
    Views
    4K
    MP1 MP2 IPTV struggle DE
    Hello nicholasclark, thank you for your reply. I was trying to get my Mum's MediaPortal TVPC up to date as the time has come to replace her television with a new "smart" TV. My though was not to get involved with the "Smart" TV, but get a dumb 4K LED Panel and run it from MediaPortal. Great to have a new TV with "The Smarts" but...
    Hello nicholasclark, thank you for your reply. I was trying to get my Mum's MediaPortal TVPC up to date as the time has come to...
    Good day folks. I am trying to get my Mediaportal 1 system connected to use IPTV and finding it a bit of a struggle. I do not know...
    Replies
    3
    Views
    1K
    After many hours of troubleshooting I've given up and accepted that it's just "one of these things" when using madVR for watching live TV. I've now ticked the box to "Use EVR for LiveTV", with a default display refresh rate of 50Hz. In combination with tweaking some of the Nvidia 3D settings for the MP executable only, I now have a...
    After many hours of troubleshooting I've given up and accepted that it's just "one of these things" when using madVR for watching...
    Every so often, when I switch to a TV channel, my MP client stops accepting user inputs, either from the remote or keyboard/mouse...
    Replies
    30
    Views
    10K
    Mockups can turn into a workable skin layout, but I'd treat AI as a starting point rather than a shortcut past understanding MediaPortal's XML skin structure. The risk is generating something that looks right in a preview yet breaks on real TV resolutions or odd DPI settings. Has anyone here actually moved from mockups to a...
    Mockups can turn into a workable skin layout, but I'd treat AI as a starting point rather than a shortcut past understanding...
    I have wanted to create a skin for MePo for years, but lack of free time due to other time demanding creative output (i.e. hobbies)...
    Replies
    1
    Views
    996
    When I rebooted this morning, the same problem came back. But I did find my error, it turned out I had accidently clicked on "Filtering: On startup filter by: Unwatched Movies" in "Moving Pictures Configuration". Don't know how I did that. (n)
    When I rebooted this morning, the same problem came back. But I did find my error, it turned out I had accidently clicked on...
    About a 2 months ago I was having problems with filtering for unwatched movies. I couldn't find the filter for it. So I tried...
    Replies
    3
    Views
    958
    Top Bottom