MediaPortal Version: 1.1.0
MediaPortal Skin: StreamedMP
Windows Version: 7 Home Premium
CPU Type: Core i3 530
HDD: WD 1TB Green Power WD10EARS
Memory: 4GB DDR3 1333 G-Skill
Motherboard: ECS H55H-I
Video Card: Intel HD Graphics / Clarkdale
Video Card Driver: Latest Intel HD Graphics available on site as of today
Sound Card...
MediaPortal Version: 1.1.0
MediaPortal Skin: StreamedMP
Windows Version: 7 Home Premium
CPU Type: Core i3 530
HDD: WD 1TB Green...
MediaPortal Version: 1.1.0
MediaPortal Skin: StreamedMP
Windows Version: 7 Home Premium
CPU Type: Core i3 530
HDD: WD 1TB Green...
Sorry, I should have been more clear.
Indeed I'm using WebEPG, and your explanation is fine.
By not working: I mean that I don't see any programs listed in the tvguide in mediaportal for this channel.
Sorry, I should have been more clear.
Indeed I'm using WebEPG, and your explanation is fine.
By not working: I mean that I...
MediaPortal Version: 1.1.0.0
MediaPortal Skin: Blue3wide
Windows Version: Vista Ultimate 32bit SP2
CPU Type: AMD Athlon Dual...
Thanks for the response! For whatever reason, though I hadn't yet touched the settings there, page up/down was not present in Keys and Sounds. So I added them myself, and now of course am obsessing over every possible key.
Ahhh, the joys of the endless configuration of open-source HTPC software ;).
Thanks for the response! For whatever reason, though I hadn't yet touched the settings there, page up/down was not present in Keys...
MediaPortal Version: 1.1.0 Final
MediaPortal Skin: Streamed MP
Windows Version: Windows 7
Hello, I would like to be...
Hi,
My EPG providers (both XMLTV and DVB-T EPG) put additional metadata in the program name, such as: classification, re-run, subtitle languages etc. They also put some other information, such as the episode name & number, inside the description.
Is there a way to customize parsing of the EPG data, to put the information in the...
Hi,
My EPG providers (both XMLTV and DVB-T EPG) put additional metadata in the program name, such as: classification, re-run...
Hi,
My EPG providers (both XMLTV and DVB-T EPG) put additional metadata in the program name, such as: classification, re-run...
Hi arion,
You're right it was with webepg, that's why it's so far away in my memory. :D
The reason that I switched to xmltv was because sites started blocking the scrapers.
It's not really a big problem, just when programming a series and not being in the tv guide, it happened more then once that I forget that NatGeo is not...
Hi arion,
You're right it was with webepg, that's why it's so far away in my memory. :D
The reason that I switched to xmltv...
Hi,
I'm using XmlTv with mc2xml which works fine.
Recently, my provider has bundled a few stations of which NatGeo is one so...
+1 on this (and bump)
If I got this right this could be somewhat customizable by editing mytvguide.xml in your skin, I haven't tried this myself and I assume it's not recommended, and this would probably only affect your tvguide so you would also have to edit this everywhere else where there's a description as well...
I assume...
+1 on this (and bump)
If I got this right this could be somewhat customizable by editing mytvguide.xml in your skin, I haven't...
Hi,
I am importing xmltv.xml file with the XmlTv plug-in of TV Server. It's working fine, but I have a question. Is it possible...
Actually, now I have worked out what I was trying to ask originally - in tv fullscreen mode, when I hit up/down channel, there is no longer "next program" info on the osd. I'm positive that older versions of MP had this functionality. Any ideas how to get this back anyone?? Cheers.
Actually, now I have worked out what I was trying to ask originally - in tv fullscreen mode, when I hit up/down channel, there is...
Hi all,
Is it possible to have blue3wide skin show the next (and current) tv program/show? I'm sure it used to show both, but...
In 1.1.0 it works on a per program basis. That is only programs that exist in the new grab will be removed from the database. So if for some reason the grabber fails for on channel, or even just one day, the existing data for that channel and period will be retained.
In 1.1.0 it works on a per program basis. That is only programs that exist in the new grab will be removed from the database. So if...
Hi
On my media portal 1.1 rc2, I have both the dvb epg and the web epg plugin (some channels are not available on web epg for...
Dear Community
Sadly we have been notified by a family member, that Angus Mann passed away on 6 May 2010.
Our condolences go to his family and friends, I'm sure he is being sorrowfully missed by both them and our members he helped alike.
We have no choice but to close this thread, and thank Angus posthumously for his past...
Dear Community
Sadly we have been notified by a family member, that Angus Mann passed away on 6 May 2010.
Our condolences go...
Hi all. I have written a program to download TV guide data for Australia. It can output in XML for MediaPortal or Windows Media...
I think I've got this working using the mc2xml via Legacy Microsoft. Now I realize the folks maintaining the SD plugin were manipulating the description just a tad to add the Episode name to the beginning (followed by a colon ":") and appending "(New: mm/dd/yyyy) and others... see a typical string that MP uses when you are playing...
I think I've got this working using the mc2xml via Legacy Microsoft. Now I realize the folks maintaining the SD plugin were...
MediaPortal Version: 1.1.0 RC1 (TV Server Only)
MediaPortal Skin:
Windows Version: XP32 bit
CPU Type:
HDD:
Memory:
Motherboard...
Hello There :)
I use mediaportal for long time.
Only revently tho I moved to version 1.1.0 RC2
There is something really anoying that bothers me.
it was on older version too.. but there, I could bypass it.. now I can't.
I have everything about EPG working good .. in my language (Hebrew)
It's all perfect.. but when I want to...
Hello There :)
I use mediaportal for long time.
Only revently tho I moved to version 1.1.0 RC2
There is something really anoying...
Hello There :)
I use mediaportal for long time.
Only revently tho I moved to version 1.1.0 RC2
There is something really anoying...
I have added a CY folder myself, but am also using xp for my tvserver therefor, it did not appear in the WebEPG.
However Cyprus exist in regional settings :)
I have added a CY folder myself, but am also using xp for my tvserver therefor, it did not appear in the WebEPG.
However Cyprus...
Hello guys:)
Am currently living in Cyprus, were there an epg service of any kind is unavailable.
Using TVxb, I managed to make an...
maybe do a first write do the database after the current and the following show is grabbed? its not an issue when using WebEPG configured correctly (what I have now).
But for some time now I did not had a grabber for some channels, and they have also only a short (2 programs) via DVB-EPG. Switching to that channel meant mostly no...
maybe do a first write do the database after the current and the following show is grabbed? its not an issue when using WebEPG...
When tuning to a channel in LiveTV (DVB-C) which does not have a loaded EPG yet, its needs 1-2min to grab the DVB-EPG.
My...
Thanks Arion, I didn't realise you could run TvSetup and MP together, though it's still a pain to start MP all the time.
It would be soooo much easier just to pop into the EPG config section, select a 'View EPG' tab and see if it's being populated correctly.
Maybe it could highlight the channels that have no data too..?
Thanks Arion, I didn't realise you could run TvSetup and MP together, though it's still a pain to start MP all the time.
It would...
Just a suggestion really - would it be possible to show the EPG data in the TV Server setup application?
It's a bit of a pain to...
Hi guys,
I'm not sure if anyone has asked or tried this before. I've searched the site but found no answers.
I would like to view the EPG on my computer without having a TV tuner installed. Is that possible?
I'm in Australia btw.
Cheers,
Milt
Hi guys,
I'm not sure if anyone has asked or tried this before. I've searched the site but found no answers.
I would like to...
Hi guys,
I'm not sure if anyone has asked or tried this before. I've searched the site but found no answers.
I would like to...
Hello, I have noticed that some people are having trouble having the guide data from the tvguide.xml file import the actual guide data into the mediaportal guide. I have played around with this for a bit and ran into the same issue myself and I have found a way to actually get the guide data to actually import and show up in the tv...
Hello, I have noticed that some people are having trouble having the guide data from the tvguide.xml file import the actual guide...
Hello, I have noticed that some people are having trouble having the guide data from the tvguide.xml file import the actual guide...
I take some of this back - this might be a skinning issue after all. Looking closer I see that a scheduled programme is shown in red when it's highlighted, and in Blue3 the same icon shows as in the TV Guide, but on neither skin is anything apparent without highlighting the show. I've checked other skins too - XFactor and Fidelity...
I take some of this back - this might be a skinning issue after all. Looking closer I see that a scheduled programme is shown in...
MediaPortal Version: 1.1.0 RC2
MediaPortal Skin: Any
Leaving the rest as I don't believe it's relevant
There are a few niggles...
Is there any EPG grabber (for german television), that shows the info, if a movie is send in HDTV? Click Finder shows the text "HDTV" in the short description, but apparently not, when I go into the details and it seems that the "TV Movie EPG import" plugin only shows the detailed description.
Regards,
--Alex
MediaPortal...
Is there any EPG grabber (for german television), that shows the info, if a movie is send in HDTV? Click Finder shows the text...
Is there any EPG grabber (for german television), that shows the info, if a movie is send in HDTV? Click Finder shows the text...
Yes, thanks for that. I managed to establish what the xmltv plugin is reading from the xml file for the Classification field. It doesn't look correct to me with <value>PGR</value>. It seems no MP developers are reading the xmltv forum as I've not got any responses from my message there.
Yes, thanks for that. I managed to establish what the xmltv plugin is reading from the xml file for the Classification field. It...
G'day
I'm just curious how can one edit/view information of the tv guide database? Say if I wanted to delete some EPG or edit...
Hi!
I made an additional EPG grabber for some channels which are not provided by default in the new version of MP. The weird thing is that when I check everyting in the WebEPG Designer, everyting seems fine - and the program parses the listings correctly but I get an error while grabbing the channels to the database.
The TV log...
Hi!
I made an additional EPG grabber for some channels which are not provided by default in the new version of MP. The weird...
Hi!
I made an additional EPG grabber for some channels which are not provided by default in the new version of MP. The weird...
MediaPortal Version: 1.10 RC1
MediaPortal Skin: Default
Windows Version: Windows 7 Ultimate x64
1. TV Card: HDHomeRun
I just installed MediaPortal and incountered a strange problem with the EPG.
I used the tvserver so find all my channels, and actived the default DVB-C EPG grapper (and put the idle time to 1min - just to...
MediaPortal Version: 1.10 RC1
MediaPortal Skin: Default
Windows Version: Windows 7 Ultimate x64
1. TV Card: HDHomeRun
I just...
MediaPortal Version: 1.10 RC1
MediaPortal Skin: Default
Windows Version: Windows 7 Ultimate x64
1. TV Card: HDHomeRun
I just...
Thats the theory anyway.. but it doesn't work that way..
I have tried to do it your way many, many times.. but my times were always out until i did what i mentioned in my previous post.
cheers
Thats the theory anyway.. but it doesn't work that way..
I have tried to do it your way many, many times.. but my times were...
MediaPortal Version: 1.1.0
MediaPortal Skin: StreamedMP
Windows Version: Win7
1. TV Card: Haupaugge 500MCE
1. TV Card Type: Analog...
MediaPortal Version: 1.1 RC1
MediaPortal Skin: All
Windows Version: 7
CPU Type:
HDD:
Memory:
Motherboard:
Video Card:
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card:
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card...
MediaPortal Version: 1.1 RC1
MediaPortal Skin: All
Windows Version: 7
CPU Type:
HDD:
Memory:
Motherboard:
Video Card:
Video...
MediaPortal Version: 1.1 RC1
MediaPortal Skin: All
Windows Version: 7
CPU Type:
HDD:
Memory:
Motherboard:
Video Card:
Video...