I've been using the Zap2xml scraper for a few weeks now (first link in jburnette's post) and it works pretty well, it's kind of a PIA to set up but it does work for scheduling recording, the different color for movies and such doesn't work though. You only get 7 days on your schedule at a time and the first time it took an hour to...
I've been using the Zap2xml scraper for a few weeks now (first link in jburnette's post) and it works pretty well, it's kind of a...
I was setting up my zap2it plugin until I realized zap2it is now shut down...
i've run into nothing but problems with setting...
has anyone gotten a FusionHDTV5 RT Gold to work? i've been working on the def. file, but no luck yet.
I have RC3 and the latest Dvico drivers (from there site)
I have just the drivers installed, no Dvico software (7-zip rules!!)
I have just 3 entries in Device Manager (WinXP Pro SP2)
I'll post my DevID for my card up later, if needed.
has anyone gotten a FusionHDTV5 RT Gold to work? i've been working on the def. file, but no luck yet.
I have RC3 and the latest...
Hi,
I couldn't seem to find the answer to this when searching the forums. Does mediaportal support QAM using a DVICO Fusion5 card...
has anyone gotten a FusionHDTV5 RT Gold to work? i've been working on the def. file, but no luck yet.
I have RC3 and the latest Dvico drivers (from there site)
I have just the drivers installed, no Dvico software (7-zip rules!!)
I have just 3 entries in Device Manager (WinXP Pro SP2)
I'll post my DevID for my card up later, if needed.
has anyone gotten a FusionHDTV5 RT Gold to work? i've been working on the def. file, but no luck yet.
I have RC3 and the latest...
I have searched around for a long time trying to figure out how to get this card to work. Apparently some people have?
If anyone...
CPU?
Hi,
It looks like purly the CPU.. I just had the AMD process monitor open. In the home screen (not basic) cores are running at 1100 Mhz, 1.1V.. Whenever I go into MyTV, both cores jump up to 2200Mhz and 1.35V
Very strange, in my case I don't see how it could be related to the GPU
Bas
CPU?
Hi,
It looks like purly the CPU.. I just had the AMD process monitor open. In the home screen (not basic) cores are...
Hi,
After i changed my PC's config a bit I noticed that the CPU fan runs at far higher revs when MP is sitting idle in the...
I don't have a TV Tuner card, can I use the Rage Theater capture device in my Radeon 9600XT? I have hooked up a VCR externally to tune the channels, but even though I can add the device in the tuner list it doesn't work.
error:
---------------------------
MediaPortal Settings
---------------------------
Unable to create...
I don't have a TV Tuner card, can I use the Rage Theater capture device in my Radeon 9600XT? I have hooked up a VCR externally to...
I don't have a TV Tuner card, can I use the Rage Theater capture device in my Radeon 9600XT? I have hooked up a VCR externally to...
Anyone solved this problem yet?
I have the same symptoms as mentioned above. I use a Twinhan card 3030 (DVB-T) with Cyberlink PowerDVD 7.3 Ultra codecs, and I have no sound on Eurosport, Discovery and Animal Planet.
I have MediaPortal 0.2.3.0 RC3 with latest SVN 16476 (this error has been around since I upgraded from RC2).
If I...
Anyone solved this problem yet?
I have the same symptoms as mentioned above. I use a Twinhan card 3030 (DVB-T) with Cyberlink...
Hi!
I have used both MP 0.2.2.0 and some of the latest SVN releases. I can't get any sound from Discovery, Animal Planet or...
Either you do not have +5 vstb from the motherboard, which powers usually your usb 0\1 sockets (check motherboard manual for this), there usually needs a jumper moving, which the instructions will be able to tell you.
So if you are using a remote make sure it is plugged into one of those usb sockets.
Try the MCE standby tool...
Either you do not have +5 vstb from the motherboard, which powers usually your usb 0\1 sockets (check motherboard manual for this)...
I can shut down my Pc with the Microsoft MCE remote, But I cant turn it on, Why is that?
Go into the languages folder. You will find strings_en.xml
Here you can change the names. String ID 3 for instance is My Videos, change that into Movies and you're done.
Go into the languages folder. You will find strings_en.xml
Here you can change the names. String ID 3 for instance is My Videos...
Hi,
I would like to rename some menu items in the basic menu page. For instance I tried to modify My Videos to My Movies but I...
I'm running media portal with windows xp and a Technotrend Budget 1500 dvb-c card. All channels work fine under linux but under windows i get loads of "mpeg blocks" on many channels. Is there any way to fix this? I have tried to use a signal amplifier (which supports the frequencies of my provider) but with no luck. These problems are...
I'm running media portal with windows xp and a Technotrend Budget 1500 dvb-c card. All channels work fine under linux but under...
I'm running media portal with windows xp and a Technotrend Budget 1500 dvb-c card. All channels work fine under linux but under...
I think mediaportal should be just that: a media portal. A way to display images, listen to music, watch TV and movies in your livingroom. I know i dont want a bloated screen with 500 icons when im sittin in the sofa, i want 3 options really: watch, listen and config/apps. And submenus from there of course.
THAT should be the...
I think mediaportal should be just that: a media portal. A way to display images, listen to music, watch TV and movies in your...
This is what a mediaportal should look like!
Media : everything (for peronal intrests) i can get my hands on so i can view it or...
Agreed, but be aware settop boxes will work where pc TVcards will not, much better tuners and less interference from the surrounding components.
May well be you aerial\cable is at fault, if you get problems with a settop box (usually shows up at least one group of channels on a particular mux will not work).
Good Luck
Agreed, but be aware settop boxes will work where pc TVcards will not, much better tuners and less interference from the...
I'm experiencing lots of problems with my DVB-T signal. It's very unstable - sometimes both strength and quality is maxed out, and...
TV-Server Version: 14324
MediaPortal Version: 0.2.2.0 + svn 14324
MediaPortal Skin: Blue Two
Windows Version: Win XP SP2
CPU Type: Intel Pentium D 3,2GHz
HDD: 160 GB
Memory: 1024 MB
Motherboard: Rio (GA-8TRC410MNF-RH)
Motherboard Chipset: ATI Radeon Xpress 200
Motherboard Bios:
Video Card:
Video Card Driver:
Sound Card...
TV-Server Version: 14324
MediaPortal Version: 0.2.2.0 + svn 14324
MediaPortal Skin: Blue Two
Windows Version: Win XP SP2
CPU...
TV-Server Version: 14324
MediaPortal Version: 0.2.2.0 + svn 14324
MediaPortal Skin: Blue Two
Windows Version: Win XP SP2
CPU...
The big problem is not the skin... we want to use TFT TouchScreen (4:3) and LCD TV Display (16:9) at same time with different resolutions / aspect ratio and control mp with the TouchScreen.
look here
https://forum.team-mediaportal.com/showthread.php?t=30302&highlight=touchscreen
The big problem is not the skin... we want to use TFT TouchScreen (4:3) and LCD TV Display (16:9) at same time with different...
Well I'm back to try media portal again after 2yrs but already the home screen is driving me nuts and I may have to move on to the...
im having a problem when playing back kvcd videos
i get a green and blue strip down the middle of the screen
does anyone no how to solve this
sincerely
john
im having a problem when playing back kvcd videos
i get a green and blue strip down the middle of the screen
does anyone no how...
im having a problem when playing back kvcd videos
i get a green and blue strip down the middle of the screen
does anyone no how...
if you want to take a look, it will open automatically by default in IE but you can choose to open it in notepad if you want to edit it.
Just remember what PD said. It's easy to screw it up, so make a back up first before you change anything.
Cheers, Marcusb ;-)
if you want to take a look, it will open automatically by default in IE but you can choose to open it in notepad if you want to...
TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version: XP SP 2
CPU Type:
HDD:
Memory:
Motherboard...
I feel your pain bro! I have never gotten powerscheduler to work properly.
It obviously does because lots of people use it, I must be missing something :wtf:
I feel your pain bro! I have never gotten powerscheduler to work properly.
It obviously does because lots of people use it, I must...
- Using the latest 0.2.3.0 RC3 release
- Machine goes in and out of suspend if power button pressed with NO problems
- Setup a...
I:thx:
It worked. I reconfigured the green button to exit mediaportal and the greenpower button to go into standby instead.
I thought at first it hadnt worked, and that was due to the fact I was still in windows and had not run mediaportal.
It will only go to standby from mediaportal whcih should be okay.
The only thing I have...
I:thx:
It worked. I reconfigured the green button to exit mediaportal and the greenpower button to go into standby instead.
I...
Hi all
Could someone please xplain how to change the mapping in the remote section of mediaportal?
I cannot understand what I...
Ill look into using the Database, but i dont like databases in MP as the one in the music section keeps making trouble for me(wont save views, wont display the stuff I edit in setup)
Ill look into using the Database, but i dont like databases in MP as the one in the music section keeps making trouble for me(wont...
TV-Server Version: latest RC3 svn
MediaPortal Version: latest RC3 svn
MediaPortal Skin: Blue
Windows Version: Windows XP Prof SP2...
Another way to fix is to add ffdshow as a postprocessor video filter and disable all output modes that have YUV in them (leave only RGB). Hogs the processor, though, not good for HD content.
This is Radeon 8500-specific, AFAIK.
Another way to fix is to add ffdshow as a postprocessor video filter and disable all output modes that have YUV in them (leave only...
MediaPortal Version: 0.2.3.0. RC3
MediaPortal Skin: BlueWin
Windows Version: Windows XP / SP2
CPU Type: P4/ 2000 / Northwood...