As far as i know so does WinfastDTV (which i know my daughter uses all the time when she is on her pc), which is a lot better than the Dvico app, ie a real onboard EPG, This is the link if you want it.
There are good bda drivers and then there are Dvico, Technotrend, etc who have not followed the bda specs, thats what screws up...
As far as i know so does WinfastDTV (which i know my daughter uses all the time when she is on her pc), which is a lot better than...
Howdy.
I can't get a signal when I try to use the Bluebird tuner on my dvico dual dvb-t card in TVE3. The primary (PCI) tuner...
Your TVserver settings are saved in the database and thus are kept from one version to the other.
A few weeks ago I experimented at the moment when TVserver SVNs were not that stable. At that time I lost my settings a few times. But for the last few weeks it works like a charm.
Don't forget to remove and then reinstall both...
Your TVserver settings are saved in the database and thus are kept from one version to the other.
A few weeks ago I experimented...
Hi All,
I've been using MP for a few weeks now and haven't had too many problems. I recently switched to RC3 so I could use...
I knew it was down to something unique to your setup, the problem is from this end with something like that no one could give you a answer.
Great you have it resolved.
I knew it was down to something unique to your setup, the problem is from this end with something like that no one could give you a...
TV-Server Version: N/A
MediaPortal Version: 0.2.3.0 RC3 svn Rev16420
MediaPortal Skin: BlueTwo Wide
Windows Version: XP Pro...
TV-Server Version: 2
MediaPortal Version: 0.2.3.0 (2007-09-05)
MediaPortal Skin: Blue two
Windows Version: XP sp2 up to date
CPU Type: intel Core duo 6750
HDD: seagate
Memory: 2 MB
Motherboard: Gigabyte GA-33M-S2H
Motherboard Chipset: G33
Motherboard Bios: Award release F2
Video Card: intel chipset G33/ich 9
Video Card...
TV-Server Version: 2
MediaPortal Version: 0.2.3.0 (2007-09-05)
MediaPortal Skin: Blue two
Windows Version: XP sp2 up to date...
TV-Server Version: 2
MediaPortal Version: 0.2.3.0 (2007-09-05)
MediaPortal Skin: Blue two
Windows Version: XP sp2 up to date...
DMan, would it be possible to get you to post this file up again? (Or someone else who has it)
The link seems ot be dead for me.
I have just bought one of these remotes and it will save me a lot of time attempting to configure it.
Thanks :)
DMan, would it be possible to get you to post this file up again? (Or someone else who has it)
The link seems ot be dead for me...
I checked out the supported cards list and i did not see this model, i did however see the 550 model which works.
Had anyone out there gotten this card to work with media portal? thanks
I checked out the supported cards list and i did not see this model, i did however see the 550 model which works.
Had anyone out...
I checked out the supported cards list and i did not see this model, i did however see the 550 model which works.
Had anyone out...
Well, I can't test it right now but this tvtool that and-81 mentioned looks like it might work with my card (I've got an old FX 5500). I doubt this will work with your card though since it just flat out won't overscan.
Well, I can't test it right now but this tvtool that and-81 mentioned looks like it might work with my card (I've got an old FX...
Hi everyone,
I have a Nvidia Graphics Card. Forceware Drivers provide the great opportunity to watch videos as a Fullscreen...
That button is one of the 'hard-wired" buttons in the MCE Remote's HID driver. You can only remap it by disabling the HID driver or moving to the replacement driver (there are consequences for either).
Refer to my reply to you other post here:
https://forum.team-mediaportal.com/mce_remote_remapping_suggestion-t30757.html?t=30757...
That button is one of the 'hard-wired" buttons in the MCE Remote's HID driver. You can only remap it by disabling the HID driver...
I was wondering how I could edit the default keymap for the MCE remote so I could disable the standby button. I tried remapping...
Switching from D3D to directdraw is not suggested as then ReClock can not monitor actual frame rates, it does not work with MP as it using a special exclusive mode render. However the problem seems to be that reclock is not ignore MEDIAPORTAL even though its set to ignore it.
ERIC
Switching from D3D to directdraw is not suggested as then ReClock can not monitor actual frame rates, it does not work with MP as...
Hi,
ever since i got this problem with MP, when Rclock is configured and I want to play DVD's within MP I get error messages (3...
Hi Marcus,
Thanks for your reply.
I maybe will try the webinterface, that's actually what I'm looking for.
I definitively will try RealVNC again.
Are there really people out there that remote-control a MP running on primary display in full screen mode?
Maybe I should give UltraVNC a try?
Best regards,
Heiko
Hi Marcus,
Thanks for your reply.
I maybe will try the webinterface, that's actually what I'm looking for.
I definitively...
Hi everyone,
I'm running MP 0.2.3 RC3 with TVEngine2 (don't want to use TVEngine3 due to channel switching problems and the...
I have looked through the documentation for media portal and the server, along with watching the videos, and it seems straight forward enough. I plan to have a dedicated media server, and am looking towards media portal as a solution because linux is too complicated and everything else is either expensive or limited, so media portal...
I have looked through the documentation for media portal and the server, along with watching the videos, and it seems straight...
I have looked through the documentation for media portal and the server, along with watching the videos, and it seems straight...
I have posted a bug report here :
https://forum.team-mediaportal.com/screen_stays_locked_gui_going_fullscreen_window-t30744.html
I know it looks like the kind of thing that has been reported many times before and maybe it is.
My real problem is I have to power off the PC when it happens. I have found no way to get back to...
I have posted a bug report here :
https://forum.team-mediaportal.com/screen_stays_locked_gui_going_fullscreen_window-t30744.html...
I have posted a bug report here :
https://forum.team-mediaportal.com/screen_stays_locked_gui_going_fullscreen_window-t30744.html...
Yea that update really hosed that install, i removed it with "add remove programs" deleted the remaining files in the MP folder and instaled RC3.
Can the "xmltv.dtd" file in the "XMLTV" folder be replaced with the one from the original good install of 0.2.2.0.
Yea that update really hosed that install, i removed it with "add remove programs" deleted the remaining files in the MP folder and...
OK i had MP 0.2.2.0 running fine and i used the "MediaPortal-update-0.2.0.4.exe" update so i would have the latest stable version...
It's been broken ever since MP used VMR9, if it was easy to fix it would have been done.
Hopefully when MP2 come out this will be finally be put right.
It's been broken ever since MP used VMR9, if it was easy to fix it would have been done.
Hopefully when MP2 come out this will...
TV-Server Version: n/a
MediaPortal Version: 0.2.3 RC3 with SVN build 16429
MediaPortal Skin: default
Windows Version: Windows XP...
Well, the AMD driver is from the same page, of new newer date and includes that issue, too. Is there anything the optimizer does in addition?
So you know it's compulsory - I didn't and at no stage during installing Windows or any of the multimedia software, it was mentioned. I just found that the optimizer is even available in the...
Well, the AMD driver is from the same page, of new newer date and includes that issue, too. Is there anything the optimizer does in...
Hi,
I'm new with MediaPortal and after successful installation I have only one problem left.
As indicated in the title the...
Hi All
I have a KWorld DVD Maker USB 2.0
Its basically a USB Capture device which you can plug into S-Video or composite video and audio to capture digitially.
Just wondering if anyone knows if this will work at all in Media Portal?
To get it to work is is supposed to come up as a TV Capture device if it supported?? As it...
Hi All
I have a KWorld DVD Maker USB 2.0
Its basically a USB Capture device which you can plug into S-Video or composite...
Hi All
I have a KWorld DVD Maker USB 2.0
Its basically a USB Capture device which you can plug into S-Video or composite...
As far as I know that is not currently possible but has been requested a few times. You can disable those plugins (weather, etc) but not completely eliminate them from showing on the home screen.
As far as I know that is not currently possible but has been requested a few times. You can disable those plugins (weather, etc)...
Hi All,
My question today is, I'm installing Media Portal on a machine that will not have Internet Access for my parents. I'd like...
TV-Server Version: none
MediaPortal Version: rc3
MediaPortal Skin: bluetwo
when adding an album cover to a directory, its ok 1st time,
but on the next add album art, when it finish, then the rest of the icons that had images disappear - only a regular folder show up.
you have to change directory and when go back it show the...
TV-Server Version: none
MediaPortal Version: rc3
MediaPortal Skin: bluetwo
when adding an album cover to a directory, its ok...
TV-Server Version: none
MediaPortal Version: rc3
MediaPortal Skin: bluetwo
when adding an album cover to a directory, its ok...
thanks for help on this one people
i uninstalled hvr-1300 and updated with the v4 cd from hauppauge
also uninstalled media-portal, deleted folders, then moved to the tvengine and rc3 of media-portal
playback is ok now, just got issues with recording which is something else
thanks again
thanks for help on this one people
i uninstalled hvr-1300 and updated with the v4 cd from hauppauge
also uninstalled...
TV-Server Version:
MediaPortal Version: 0.2.3.0 RC2
MediaPortal Skin: BlueTwo Dark Metal
Windows Version: XP Pro - SP2
CPU...
Hi,
Not sure if you ever resolved this problem but have a look at my post here for the answer.
https://forum.team-mediaportal.com/change_text_colour_watched_movies-t30533.html?t=30533&highlight=watched+font
Cheers
Adam
Hi,
Not sure if you ever resolved this problem but have a look at my post here for the answer...
Does anyone know how to change the color of the watched status font?
I'd like to change it to something that stands out more.