That card you suggested will do fine. Regarding the cable, you can't buy one as far as I know. You will have to solder your own. It isn't hard at all but it can require some time trying to find the right settings for your TV.
Have a look at this link:
http://ryoandr.free.fr/english.html
This link is even better but is in swedish...
That card you suggested will do fine. Regarding the cable, you can't buy one as far as I know. You will have to solder your own. It...
Ive got the exakt same problem.
This bug has plauged me for some time now.
I get it on two systems.
Config 1.
XP1800+
GF 5200
KT266 chip mobo.
Hauppauge 350 and 500, not installed @ same time.
Clean install XP Pro, with latest drivers and NV decoders. (tried all the others)
Got the stuttering when changing chanel...
Ive got the exakt same problem.
This bug has plauged me for some time now.
I get it on two systems.
Config 1.
XP1800+
GF...
OK, S/W-Card support seems to be removed... So I went shopping to get a new Hauppauge PVR 500MCE, but unfortunately I'm still havng...
Unfortunately my GRUNDIG only has SCART (which still is a good connection), no VGA or DVI. A DVI or VGA to SCART Box is going to cost me around $200, and the DVI to Component Video adapter (I could then get a component to SCART adapter) for my graphics card (it cost AU$40'ish) only MIGHT (probably not) work in Australia. So I have to...
Unfortunately my GRUNDIG only has SCART (which still is a good connection), no VGA or DVI. A DVI or VGA to SCART Box is going to...
Is there a widescreen resolution under 1280x768? Because according to my ATI Radeon 9600XT software it says that my TV only...
ok - well im awaiting a new graphics cards which is the gigabyte FX5200 so hopefully that should help alot. but as for the hdd access - its not too bad, like the cpu was being used the same on the front screen that loads up as it was when watching live tv
ok - well im awaiting a new graphics cards which is the gigabyte FX5200 so hopefully that should help alot. but as for the hdd...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-03-05)
MediaPortal Skin: mce
Windows Version: Windows XP (SP2)...
In answer to your second question, NO, because the TV card remote driver does the transmission decoding. You would need either a serial or usb receiver to use GIRDER or HIP, to set your remote buttons to do what you want them too.
8)
In answer to your second question, NO, because the TV card remote driver does the transmission decoding. You would need either a...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2005-12-16)
MediaPortal Skin: mce
Windows Version: Windows XP (SP2)...
Thnks Flip!
Hey Thanks Flip,
checked the VMR-9 setting - it was set as you suggested - sorry was using VMR-9 not overlay as I had thought.
But then..... I had a look at the picture tuning in the nVidia graphics console and played with the brightness/contrast and other settings et voila!! All happy now :)
kind regards
Matt
Thnks Flip!
Hey Thanks Flip,
checked the VMR-9 setting - it was set as you suggested - sorry was using VMR-9 not overlay as I...
Hi,
Area: Media Portal Program
MP Version: R0.2 CVS Build 03-10-2006--22-53
Skin: default
Windows Version: WinXP SP2
CPU...
I actually have no trouble using scriptedlogon w/ windows XP LSD 3.5 (a slipstreamed version). Is this reproducible with any other similar proggie or is it specific to scriptedlogon?
Nota: beware of services or autostarted programs that require/use explorer.
I actually have no trouble using scriptedlogon w/ windows XP LSD 3.5 (a slipstreamed version). Is this reproducible with any other...
Hi,
I've found that when I replace explorer as shell and use Scripted Logon (or any other similar software for that matter) as a...
Thats more commonly referred to as the US version, but its obviously not limited to the US. Its possible, sites use the wrong pictures as they dont really care about the small differences between them so its always good to verify what your buying first.
Thats more commonly referred to as the US version, but its obviously not limited to the US. Its possible, sites use the wrong...
Hi,
clean MP 020 wit CVS 2006-03-11
Athlon XP 3000, 512 MB DDR 400
NIVIDA-Chipset V2
Hauppauge PVR500 - dual Tuner
I installed the newest CVS (2006-03-11) and got still Problems with recording TV.
I have to "activate" both tuners, otherwise both just record nothing.
"Activation" means I go to myTV, watch one channel...
thx for the tips I will try them.
As for "Can you increase the bit-rate of your MPEG encoder" I am a newb and am not sure if or how I can. I got a PVR-150MCE if that helps. With ffdshow is that something I have to download and setup within mediaportal? I remember seeing that option in the settings.
thx for the tips I will try them.
As for "Can you increase the bit-rate of your MPEG encoder" I am a newb and am not sure if or...
I am using Purevideo as my decoder and it is plenty watchable through my standard 27" TV. But I decided to hook cable to my TV and...
I Have got the H/W-mode working.. I can use it to watch TV but I can not record.. I am using the newest drivers from asus MyCinema_13-3-11
I have also another problem with this card and it is when I use the S/W-mode, I can't watch TV (same channel) when i'am recording, it's just a blackscreen.. I have used p7134 dual in other...
I Have got the H/W-mode working.. I can use it to watch TV but I can not record.. I am using the newest drivers from asus...
Hi
Have tried this with both the latest official version and the RC2!
When I try to set it up in the setup...
Thanks.
I installed it all last night and was coming to the conclusion myself although still wasn't positive.
Slowly but surely I I'm progessing to a working Media Portal setup. Got a few probs but they're for other threads.
Thanks.
I installed it all last night and was coming to the conclusion myself although still wasn't positive.
Slowly but...
First post here. Hello all. :)
I have searched around and am pretty sure my question's not been answered. If it has just...
Here is my working config:
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-03-01)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPEG/AC3/DTS/LPCM Audio Decoder
Video Codec: Mpeg2Dec Filter
CPU Type: Intel Celeron -...
Here is my working config:
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-03-01)
MediaPortal Skin: BlueTwo...
I have this problem in mp , with pvr150 card, the my Tv munu don't dipley Teletext button, if use the button on remotectrl appear...
i've notice some of the nvidia video cards have HDTV decoders on them, which allows the HDTV video to be process on the video card instead of the CPU. so the question is if i had a HDTV tuner (which the feeds are processed by the CPU) supported by media portal will the video card help and decode the HDTV video?
i've notice some of the nvidia video cards have HDTV decoders on them, which allows the HDTV video to be process on the video card...
i've notice some of the nvidia video cards have HDTV decoders on them, which allows the HDTV video to be process on the video card...
That was it ... a bug:
On 10/03/2006 [07:28:13] _Frodo_ added the following change: fixed ss2 blank autotune tab
Fixed with build mediaportal-cvs-03-11-2006--01-10.rar.
Thanks _Frodo_ !
That was it ... a bug:
On 10/03/2006 [07:28:13] _Frodo_ added the following change: fixed ss2 blank autotune tab
Fixed with...
Please forgive me if it has already been treated in this forum but I couldn't find any reference to it ...
With a skystar2 card...
Sure. I can do that. But I just noticed this as comment on Typhoon TV PVR (on the supported cards page) and feel a bit disheartened.
This device will not work with the current Mediaportal 1.xxx. It has its own peculiar way of connecting filters (Pins) so that Mediaportal cannot decode the signals correctly. All attempts to connect...
Sure. I can do that. But I just noticed this as comment on Typhoon TV PVR (on the supported cards page) and feel a bit...
I am in the USA. Is support being considered for G07007SB hardware devices with a philips chipset in the next release?
I use...
If your gonna use Windows XP then youll need this patch to begin with https://forum.team-mediaportal.com/viewtopic.php?t=11814&postdays=0&postorder=asc&highlight=dvb+fix&start=15
as XP is broken and wont work properly with dual tuners (have to wonder if thats a co-incidence, MCE2005 works fine).
Otherwise its up to the drivers...
If your gonna use Windows XP then youll need this patch to begin with...
Hello friends,
I know, it's always boring for you with a newbie ... :oops:
I have some general questions before I start...
i asume you've checked "Load ID3 tags from file if it's not in music ...". This is in MP Configuration in Music - General Settings.
A file is you're playing is not in the DB. And it looks like your files don't have valid Tags.
So seeing that you don't have too many files, i would untick thos option and delete musicdatabase4.db3...
i asume you've checked "Load ID3 tags from file if it's not in music ...". This is in MP Configuration in Music - General Settings...
I have few subfolders in main music share folder. Most of them have relatively low number of file ( under 30 each ) and everything...
No, that's not necessary. Run MP Configuration and make sure that you have "Enable Exclusive DirectX" selected in Home and that "Grab EPG...." in Television / Program Guide is de-selected.
If you are still having problems, post your MediaPortal.log file - that is "source of all truth".... :wink:
No, that's not necessary. Run MP Configuration and make sure that you have "Enable Exclusive DirectX" selected in Home and that...
I have a Compro DVB-T300 Digital Tuner and with its software I can get all the channels (I live in Australia by the way). I can't...