Having trouble installing or configuring MediaPortal?
No problem - any help is appreciated :-)
No problem - any help is appreciated :-)
TV-Server Version: (the one installed by MediaPortal 1.0.0)
MediaPortal Version: 1.0.0
MediaPortal Skin: default 4:3
Windows...
I have the same problem (i'm not gonna sum it all up because it's exactly the same)... but where can I find those encoders?
I installed PowercCinema (which was shipped with the card) and everything works fine within that program... in MP I get the error NoAudioVideoDetected when I try to preview a scanned channel.
thx in advance!
I have the same problem (i'm not gonna sum it all up because it's exactly the same)... but where can I find those encoders?
I...
Short Summary:
I have an Asus My Cinema P7131-Hybrid card, with the correct drivers installed. The card works perfectly fine with...
One other thing I've discovered is that in VMR9 mode (with 14.36.5.5016), if the video is larger than your resolution then it doesn't display the video and has lots of grey artifacts. Workarounds are EVR (again) or use ffdshow-tryouts to resize the video to screen resolution.
One other thing I've discovered is that in VMR9 mode (with 14.36.5.5016), if the video is larger than your resolution then it...
TV-Server Version: None
MediaPortal Version: 1.0.0.0
MediaPortal Skin: Bleazle
Windows Version: XP SP3
CPU Type: Intel C2D...
A bit of an update on this from me.
I was advised by a friend that I had to have a blu-ray player installed, so I made an image of the drive and installed the powerdvd that came with my LG drive. This enabled playing of the files, but powerdvd was running "under" MP. When I exited MP I could see powerdvd running the movie. I went...
A bit of an update on this from me.
I was advised by a friend that I had to have a blu-ray player installed, so I made an image...
New Install, Can't Play HD .iso Files
Hi all,
I'm a new member / first time HTPC builder, though experienced with building...
It seems this problem is related to the task scheduler. Thing is, Im running it on a lite version of xp, and it was running BEAUTIFULLY a few days ago so this cant be the problem.
The only thing i changed was to a new video card. An Asus Radeon 3450. I installed the drivers then after a while MP crashed and closed. My task bar in...
It seems this problem is related to the task scheduler. Thing is, Im running it on a lite version of xp, and it was running...
Hi, I am unable to install MediaPortal on my computer. The .Net Framework error log is below. I had to reinstall XP and changed to...
NO I'm using an Intel Dual Core. I upgraded beause i figured i needed alittle more power. But same stuttering and no video. I suspect its teh codec for the Twinhan DVB-C Mantis card. Thing is, its driving me CRAZY!!! No tv is a serious thing, lolol
NO I'm using an Intel Dual Core. I upgraded beause i figured i needed alittle more power. But same stuttering and no video. I...
TV-Server Version: 1
MediaPortal Version: 1
MediaPortal Skin:
Windows Version: XP SP3
CPU Type: Dual Core 2ghz
HDD...
A reinstall fixed this problem.
A reinstall fixed this problem.
The error is that it can't find the WebEPG.xml file where the WebEPG.xml file actually is. Does anyone have any ideas?
WebEPG...
I have modified the imdb grabber for the US. I saved the old one just in case. When I changed the file webEPG recognizes the file and makes a TVguide.xml. The original one pulled in programs but the edited one doesn't. The xml files appear the same except for the change tv call signs and channel numbers. I am not sure why one...
I have modified the imdb grabber for the US. I saved the old one just in case. When I changed the file webEPG recognizes the file...
I have modified the imdb grabber for the US. I saved the old one just in case. When I changed the file webEPG recognizes the file...
Hi,
I have an USB Hauppauge capture card (WinTV Nova-T-HD) that comes with a slim remote. Making this remote to work on MP 1.0.0 is being a nightmare.
I have tried with the three Hauppauge remote configurations (45, 34 and 21 buttons), but none of them seems to function. After clicking on Learn and then Start Learning, it looks...
Hi,
I have an USB Hauppauge capture card (WinTV Nova-T-HD) that comes with a slim remote. Making this remote to work on MP 1.0.0...
Hi,
I have an USB Hauppauge capture card (WinTV Nova-T-HD) that comes with a slim remote. Making this remote to work on MP 1.0.0...
Can't get either the Configuration Utility or MP to load.
Comes up with .NET Runtime 2.0 Error and bombs out
I've just done a brand new install of MP on a PC, Compaq Evo 510D.
New install of XP, with IE7, .Net 2.0 and all OS security updates.
KMPlayer, CoreAVC and Halaai Splitter only other software installed.
Have same...
Can't get either the Configuration Utility or MP to load.
Comes up with .NET Runtime 2.0 Error and bombs out
I've just done a...
Can't get either the Configuration Utility or MP to load.
Comes up with .NET Runtime 2.0 Error and bombs out
I've just done a...
... well, for regular use, you do need a license - but back to the topic. Since you obviously have some experience with it, I have some questions (I have set up MP on 2008/64 some month ago and it also worked with the known modifications - but some things I wastn't able to solve):
1. Did you ever find signed drivers for USB2Serial...
... well, for regular use, you do need a license - but back to the topic. Since you obviously have some experience with it, I have...
I'm about to try MediaPortal again on my HTPC that's running Windows server 2008. Last time it didn't run too well, but with the...
Is there any way to get the 950q to work?
Is there any way to get the 950q to work?
MediaPortal Version: 1.0 RC2 with SVN 0.9.2.20143
MediaPortal Skin: BlueTwo
Windows Version: Windows XP Pro (SP2)
CPU Type...
Yep, this is a good tutorial for setting up hardware-acc with MPC-HC. Its in swedish, but the images do all the talking:
SweClockers.com - Forum: Guide till DXVA/Hårdvaruaccelerering av HD formaten
Ive tried using MPC-HC as an external player from inside MP, but I have a remote that MP supports but not MPC-HC, so I rather have MP...
Yep, this is a good tutorial for setting up hardware-acc with MPC-HC. Its in swedish, but the images do all the talking...
Im using MP all the time nowadays and it works wonderfully with most video-types/files (except for iso-packaged videos, since MP...
Hi,
I just upgraded to the latest version of MP(1.0), after using it now for almost a year.
But after starting MP I do not have any sound. I am used to the soft clicks when I am changing thumbnails or options. No sound at all! And no sound in mij DVD, Movies or TV. I tried to look for an option within the MP Configuration, but...
Hi,
I just upgraded to the latest version of MP(1.0), after using it now for almost a year.
But after starting MP I do not...
Hi,
I just upgraded to the latest version of MP(1.0), after using it now for almost a year.
But after starting MP I do not...
Hi Quental,
I did not mention that after my last fresh Vista install and new MP install I chose MY SQL5. For me, this SQL version seems stable. I had to first re-install Vista, because if I simply installed MY SQL5 I could not connect to te TV server.
Hi Quental,
I did not mention that after my last fresh Vista install and new MP install I chose MY SQL5. For me, this SQL...
TV-Server Version: 1.0
MediaPortal Version: 1.0
MediaPortal Skin:
Windows Version: Vista
CPU Type: Intel(R)Core(TM)2 CPU 6300...
I found CLVsd.ax. Since I only wanted to install the PowerDVD codecs, not the whole batch provided by SAF, I registered it with regsvr32, following a tip found later in the thread you recommended. This gave me the Cyberlink MPEG decoder in MP config. I then registered CLNavX the same way to get the Cyberlionk DVD navigator. What I...
I found CLVsd.ax. Since I only wanted to install the PowerDVD codecs, not the whole batch provided by SAF, I registered it with...
Hello everyone,
I've been using MediaPortal for a few years now (most recently v0.2.3.0) and have been quite happy with it so I...
Im using FireDTV.. I just tried it with Vista Media Center, and It cant find discorvery either. And four months ago I could using Vista Media Center. Maybe something wrong with the antenna? Is there a tool I can use to test if the antenna has contact with all the MUX's?
Im using FireDTV.. I just tried it with Vista Media Center, and It cant find discorvery either. And four months ago I could using...
Hi,
Im missing sime channels after I do a channelsearch. Like Discovery and Animal Planet. Im using MP 1.0 TV Server 1.0 and a...
Maybe I was a little bit unclear in my first post that it is MediaPortal which is the problem.
The Cinergy remote and Intelliphone are used with separate software. The Cinergy with Terratec software and Itouch with Intelliremote, both works with every program, except MP! Despite the keys being mapped.
The problem as I see it is that...
Maybe I was a little bit unclear in my first post that it is MediaPortal which is the problem.
The Cinergy remote and Intelliphone...
I have a problem getting Intelliphone and my Cinergy XS remote to function with MP 1.
They are working with MCE, VLC, MP2 etc...
Sorry about the delay in getting back. But your advise worked a charm. Cheers.
Sorry about the delay in getting back. But your advise worked a charm. Cheers.
TV-Server Version: RC4
MediaPortal Version: RC4
MediaPortal Skin: Latest Monochrome
Windows Version: MCE2005 w Rollup2 & all...
See if this workaround helps you https://forum.team-mediaportal.com/general-support-51/mp-hangs-when-getting-out-standby-50788/
See if this workaround helps you https://forum.team-mediaportal.com/general-support-51/mp-hangs-when-getting-out-standby-50788/
HELPPPPPP MEEEEEEE!
i have tried everywork around and setting available but still the same problem happens! on resume i see...
If you open MP Configuration you will see a down-arrow top left. Right next to User Config Files. There you will have an option to take you to log directory.
If you open MP Configuration you will see a down-arrow top left. Right next to User Config Files. There you will have an option to...
hi there i have got a problem with the movie database in mp! if i go to videodatabase in the mp configuration there are no...
TV-Server Version: 1.0.0.0
MediaPortal Version: 1.0.0.0
MediaPortal Skin: BlueTwo
Windows Version: Vista32 Ultimate
CPU Type: AMD 2 * 2.1
HDD: 180 GB + netdrive SC0101
Memory: 4 GB (3 Available)
Motherboard: ASUS
Video Card: ATI Radeon X1200 Series
Video Card Driver: EVR
Sound Card: MB integrated
Sound Card AC3: coax SPDIF...
TV-Server Version: 1.0.0.0
MediaPortal Version: 1.0.0.0
MediaPortal Skin: BlueTwo
Windows Version: Vista32 Ultimate
CPU Type...
TV-Server Version: 1.0.0.0
MediaPortal Version: 1.0.0.0
MediaPortal Skin: BlueTwo
Windows Version: Vista32 Ultimate
CPU Type...
Batteries
The last i would think is to chnge the batteries, since the red light was blinking when using the remote it looks like it is working.
I also have a MCE Keyboard which is function perfectly but the MCE Remote didn't.
So i changed the batteries and now it is working again.
Big Thanks :thx::thx::thx:
Batteries
The last i would think is to chnge the batteries, since the red light was blinking when using the remote it looks...
It used to work, but as I don't use it very often, I have no idea when it stopped working.
(I do have it enabled in the...
This guide can be found in our wiki:
TeamMediaPortal/MP1QuickSetupGuide - MediaPortal Manual Documentation
Good idea, will try to add this.
This guide can be found in our wiki:
TeamMediaPortal/MP1QuickSetupGuide - MediaPortal Manual Documentation
Good idea, will try to...
First of all, a HUGE :thx: to all the developers for this awesome tool. I've been testing, upgrading Vista etc so I've had to...
Update&bump:
For me the problem is due to broken IFO files. However, IFOEDIT fails to recreate working IFO files so I'm somehow stuck. VLC doesn't care about the IFO files - it simply plays the movies. Any idea how i can get MP to do this, too?
thanks in advance
Update&bump:
For me the problem is due to broken IFO files. However, IFOEDIT fails to recreate working IFO files so I'm somehow...
TV-Server Version:
MediaPortal Version: mp rc2
MediaPortal Skin:
Windows Version: vista 32
CPU Type: intel c2d
HDD: sata &...
TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard:
Video Card:
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card:
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card...
TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard...
TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard...
Thank You it's working...
Used the database thing to show pictures on the DVD folders...
And now I see I could have simply done it this way...
Read this way of doing it before, but I first thought it had to be named after the folder's name and not actualy "folder.jpg"
Thank You it's working...
Used the database thing to show pictures on the DVD folders...
And now I see I could have simply done...
I wanted to know if there's a way in MP 1.0 RC4 to attach pictures to a movie parent folder...
Here's an example to try to make...
I agree. From doing a lengthy search the screen saver issue in MP has been noted and complained about since 2005.
I have no idea why the developers would want the screen saver enabled in MP while people are watching movies.
My HTPC is mainly for that purpose, but also is used for other things. Given I am using a plasma, I dont...
I agree. From doing a lengthy search the screen saver issue in MP has been noted and complained about since 2005.
I have no...
Whilst listning to music the screen saver kicks in...
This also hapns when i have a visulisation runing..
Iam running in full...
today i installed MediaPortal 1
i all completed
but when went to "Settings" -> "Installation Wizzard" i tried to add (autodetect) my tv card (AverTV Media GO 007 FM Plus) but i cant add or it cannot find my tv card.
is there any other way to add that card? or isnt that card supported?
Greetings
today i installed MediaPortal 1
i all completed
but when went to "Settings" -> "Installation Wizzard" i tried to add...
today i installed MediaPortal 1
i all completed
but when went to "Settings" -> "Installation Wizzard" i tried to add...
Dude, your a live saver. I gut my Trust 2400 vista remote on a Eee box of asus. And that comes with XP.
I have SP3 though, and still needed the drivers from the windows update. So I opened it and it extracted then gave an error that it was not needed for this computer. Before pressing OK I copied the driver pack out of the folder...
Dude, your a live saver. I gut my Trust 2400 vista remote on a Eee box of asus. And that comes with XP.
I have SP3 though, and...
Not too sure if this has already been posted, but I have been a MCE (Vista) user (I am tight, or skint), due to the lack of...