Having trouble installing or configuring MediaPortal?
TV-Server Version: 1.0
MediaPortal Version: 1.0
MediaPortal Skin: Blue3
Windows Version: Xp sp3
CPU Type: AMD Athlon 64 X2 5050E
HDD: Seagate Barracuda 7200.11 32MB 500GB
Memory: Apacer DDR2 PC6400 1024MB Passive
Motherboard: Gigabyte GA-MA78GM-S2H
Video Card: Asus EN8500GT Silent/HTP/256M
Video Card Driver: 6.14.11.7824...
TV-Server Version: 1.0
MediaPortal Version: 1.0
MediaPortal Skin: Blue3
Windows Version: Xp sp3
CPU Type: AMD Athlon 64 X2...
TV-Server Version: 1.0
MediaPortal Version: 1.0
MediaPortal Skin: Blue3
Windows Version: Xp sp3
CPU Type: AMD Athlon 64 X2...
I'll try those out... Thanks!
:thx:
I'll try those out... Thanks!
:thx:
Hi,
is there any way to make the mono and stereo audio that TV & some Videos have to play through some pseudosurround to use all...
Ok, I have solved the problem. The real solution was to install the SP3, but I didn´t want to, so I extracted the two required files (qcap.dll and quartz.dll) and copy them to the windos/system32 folder.
Now it starts fine.
Ok, I have solved the problem. The real solution was to install the SP3, but I didn´t want to, so I extracted the two required...
Hi,
First time install and tried from basically a clean XP.
When Medial Portal goes to start up it comes up with
"Microsoft...
I've ben using your product for quite some time, and i have to say , i am very please with it.
Everything work as expected, smoothly and perfect, except my tv tuner.
I live in portugal, it's a analog cable company around here, my tv works fine with that cable,
my beyond tv works perfect, ( get all channels and everything ), my...
I've ben using your product for quite some time, and i have to say , i am very please with it.
Everything work as expected...
I've ben using your product for quite some time, and i have to say , i am very please with it.
Everything work as expected...
Good to hear!
Yup, from those specs, your cpu is doing all the work to decode the h264 content. The issues on C4 still sound like codec issues, and perhaps the version of PowerDvd isn't full or something. Or it could be a de-interlacing issue and that should be fixed up with a new graphics card.
The ideal scenario is that you...
Good to hear!
Yup, from those specs, your cpu is doing all the work to decode the h264 content. The issues on C4 still sound...
Im in NZ and just installed a Hauppauge Nova T 500 tuner card and mediaportal on recomendation by a friend.
My problem is on...
Thanks! That did the trick! ;)
I knew it had to be a solution to this :D
Thanks! That did the trick! ;)
I knew it had to be a solution to this :D
Hi,
Is it possible to automatically fetch move information from IMDB based on the folder name? If so, how?
My movies lie in...
Tv Server
Hi Paranoid Delusion,
I have a 2 x gigabit adapters.
I have looked at the Microsoft loopback adapter and didn't see how it would work in my situation that is what got me wondering if I installed the TV Server correctly.
I know Timeshifting works on main pc becuase I have to manually stop it after trying to view TV...
Tv Server
Hi Paranoid Delusion,
I have a 2 x gigabit adapters.
I have looked at the Microsoft loopback adapter and didn't...
TV-Server Version: 1.0.0.0
MediaPortal Version: 1.0.0.0
MediaPortal Skin: Aeon
Windows Version: Vista
CPU Type: Quad Core...
Im not at mediaportal but I have a question.
so when you load mediaportal config on your laptop and go to Videos/Movies?? and add a path you can browse to eg PC1\data\video...
I no expert but if you can browse with explorer and find the network dir you should be able to in mediaportal.
I wish the server could steam the...
Im not at mediaportal but I have a question.
so when you load mediaportal config on your laptop and go to Videos/Movies?? and add...
I'm pretty new to Media Portal and trying to get things setup and working, and haven't gotten a little lost and confused perhaps...
TV-Server Version: not used
MediaPortal Version: 1.0.0.0
MediaPortal Skin: Bluewide3
Windows Version: Windows XP Prof SP3
CPU Type: Intel E8400
HDD: 2x400 gb
Memory: 4gb
Motherboard: Gigabyte EP35-DS4
Video Card: Radeon 3850
Video Card Driver: Catalyst 8.12
Sound Card: Soundblaster Xfi Music
Sound Card AC3:
Sound Card...
TV-Server Version: not used
MediaPortal Version: 1.0.0.0
MediaPortal Skin: Bluewide3
Windows Version: Windows XP Prof SP3
CPU...
TV-Server Version: not used
MediaPortal Version: 1.0.0.0
MediaPortal Skin: Bluewide3
Windows Version: Windows XP Prof SP3
CPU...
:S Can someone delete this post or tell me how to delete it. I searched every button I can see but no delete option.
:oops: Ignor this see other post by me.
TV-Server Version: 1.0.0.0 Download 01/19/2009
MediaPortal Version: 1.0.0.0 Download 01/19/2009
MediaPortal Skin: Not changed
Windows Version: XP Professional...
:S Can someone delete this post or tell me how to delete it. I searched every button I can see but no delete option.
:oops...
:S Can someone delete this post or tell me how to delete it. I searched every button I can see but no delete option.
:oops...
I used a club3d theatron sound card with DDLive/DTS Connect Feature. Activated this soundcards will output everything in DD or DTS. Advantage: you can change the volume even for ac3. Disadvantage: Every stereo source will be 5,1 DD/DTS. I like to listen to music as it is ment to, stereo. Therefore i changed the soundcard back to...
I used a club3d theatron sound card with DDLive/DTS Connect Feature. Activated this soundcards will output everything in DD or DTS...
Hi,
I've just started to use mediaportal and although it took a bit of time getting everything working i really love it. I have...
OK I've run in to just about every conceivable problem building my HTPC, first of all my case has some random design feature that means that the CD drive has to be inserted from the front, then i made the mistake of using tinyXP, which is so stripped down that the drivers for my tv card wouldn't work, then my mouse stopped working...
OK I've run in to just about every conceivable problem building my HTPC, first of all my case has some random design feature that...
OK I've run in to just about every conceivable problem building my HTPC, first of all my case has some random design feature that...
I've installed MP 1.0.0 on Windows XP SP2 using the Administrator account. However, I run MP under a different account (with limited access). In the error.log I get the following:
2009-01-19 09:53:55.656250 [ERROR][MPMain]: User does not have sufficient rights to modify registry key HKLM\SOFTWARE\Team MediaPortal\MediaPortal...
I've installed MP 1.0.0 on Windows XP SP2 using the Administrator account. However, I run MP under a different account (with...
I've installed MP 1.0.0 on Windows XP SP2 using the Administrator account. However, I run MP under a different account (with...
Is there anybody to help me? New log and fig. Help please! Petr.
Is there anybody to help me? New log and fig. Help please! Petr.
TV-Server Version:
MediaPortal Version: MP1 RC4
MediaPortal Skin: Monochrome
Windows Version: XP Pro SP3
CPU Type: AMD 64 x2...
Ok, still without a reply from the community I have come to the following:
The UI- and Screen-Calibration incl. aspect ratio affects the whole MP layout. I know that removing the tv&movie black bands via modifying pixel aspect ratio is the wrong approach.
So, please: Who can tell me to build more appropriate zoom modes in the...
Ok, still without a reply from the community I have come to the following:
The UI- and Screen-Calibration incl. aspect ratio...
Hello,
MP is connected to a 16:9 Format LCD Flat Screen at the native analog Resolution of 1024x768 Pixels.
The Problem...
The inconvenience could be greatly reduced by a simple paragraph in the MP1QuickSetupGuide re Upgrading! Or at least a link to the WIKI instructions on upgrading.
When a program alters the location of user data, I think the user should be informed. I could not easily find anywhere that tells you the new locations of user...
The inconvenience could be greatly reduced by a simple paragraph in the MP1QuickSetupGuide re Upgrading! Or at least a link to the...
Hi,
I am using MP for some time now and I'm following all the updates. I like to stay up-to-date :)
From RC1 to RC2 my settings...
Hi, i have installed MP 1 today (for third time) and at last can get things working. however although it ran well initially I now get the timeshift error on one digital channel only. The others seem to work well. Previously I have not been able to get the analog to work. This is occuring under a cybershift H.264 decoder. The ffdshow...
Hi, i have installed MP 1 today (for third time) and at last can get things working. however although it ran well initially I now...
TV-Server Version: 0.3
MediaPortal Version: 0.2.3.0 RC3
MediaPortal Skin: Blue
Windows Version: XP Mce
CPU Type: P4 2.8 Ghz...
I have similar setup (OS + TV card + blaster), and have no problem using IR Server Suite for blasting (using TVServer).
Hi, and welcome to the forum :)
A few pointers (not much time now):
1. Only install drivers from Hauppauge, not IR-stuff etc.
2. You should use SP3 (not relevant to your problem I think, though)
3. Did you try IR...
I have similar setup (OS + TV card + blaster), and have no problem using IR Server Suite for blasting (using TVServer).
Hi, and...
Guys,
I need your help to do the setup. I have already reimage my PC twice as I failed to get the IR blaster to work. Different...
I hope somebody has had this problem or just direct me. I was using RC1 up until the Final release and found that after installation it will not accept my screen size of the TV or Dolby digital signal. I first did it the way it was suggested by backing up the files and the installing the new version. After updating my database it had...
I hope somebody has had this problem or just direct me. I was using RC1 up until the Final release and found that after...
I hope somebody has had this problem or just direct me. I was using RC1 up until the Final release and found that after...
Hey,
Is there a way to get the status of playing media in mediaportal and run a shell command or program?
I am trying to make mediaportal dim my lights when i start a movie using my own x10 software. any help??:thx:
Hey,
Is there a way to get the status of playing media in mediaportal and run a shell command or program?
I am trying to make...
Hey,
Is there a way to get the status of playing media in mediaportal and run a shell command or program?
I am trying to make...
You have to extract the content of the MediaPortal package. Then move the content of the $outdir one directory up. Then set the MediaPortal.DeployTool.exe to run in Vista Compatibility Mode. The package-mediaportal.exe and package-tvengine.exe found in the subfolder deploy have even to be set running in Vista Compatibility Mode. Then...
You have to extract the content of the MediaPortal package. Then move the content of the $outdir one directory up. Then set the...
Hello !
i have the actual mediaportal tv server version installed on my windows vista pc.
on a second pc i have installed the new...
mhm it seems problematic cause of the encryption keys... :-(
For Anybody who wants todo that have a look at anydvd.
mhm it seems problematic cause of the encryption keys... :-(
For Anybody who wants todo that have a look at anydvd.
Hi!
Is it possible to share a dvd drive in tv-server for all clients?
Stefan
I'm continuing to build my first all-in-one HTPC and noticed when I installed PowerDVD 8 Ultra yesterday it stopped seeing the virtual drive created by Daemon Tools. I didn't recognize the problem was with PowerDVD until after completely rebuilding the drive from an image I made prior to installing MP, it works with PowerDVD 7.3, but...
I'm continuing to build my first all-in-one HTPC and noticed when I installed PowerDVD 8 Ultra yesterday it stopped seeing the...
I'm continuing to build my first all-in-one HTPC and noticed when I installed PowerDVD 8 Ultra yesterday it stopped seeing the...
MP1 Final crashed
Hi, after uninstalling MP RC4 and TVServer, deleting folders and registry cleaning I have installed MP1 Final. It crashed unexpectedly by "Loading window plugins.." Any idea? Thanks
MP1 Final crashed
Hi, after uninstalling MP RC4 and TVServer, deleting folders and registry cleaning I have installed MP1 Final...
I did a fresh install of Vista HomePremium. After the installation I installed the drivers and normal software like Deamon Tools...
upgrade to mediaportal 1.0
Hi guys,
I upgraded to mediaportal 1.0 - Congrats! Great work btw!!
But now with the tv-server my analogue card is not working...
I have lifeview Hybrid... both the DVB-t and analogue cards are recognised and shown on TV-Server...
I know that you have said that analogue software cards are not...
upgrade to mediaportal 1.0
Hi guys,
I upgraded to mediaportal 1.0 - Congrats! Great work btw!!
But now with the tv-server my...
Hello,
I'm new of this forum. I hope you can understand my poor english. I bought 2 days ago a Lifeview FlyDVB-T Hybrid PCI. It...
Thanks
That was quick! I have searched through the forum, not an easy task, but couldn't find what I was looking for. Thanks for the guidance. I have some heavy reading in front of me!
Thanks again.
Thanks
That was quick! I have searched through the forum, not an easy task, but couldn't find what I was looking for. Thanks for...
1.0.0 rc4:
Indigo]:
XP SP3:
AMD P4 2900ype:
500gig:
2gig:
[[b]TV USB2.0:
Hi,
When configuring my encoders, MP is...
got it to work now.
just clicked the cam settings, set it o 1 channel to decode default cam, and al other boxes i put a mark in .
maybe usefull to say, that i found out that the technisat skystar hd is the same card, but the driver from technisat gave me a better receiption than the technotrend drivers.
after a driver...
got it to work now.
just clicked the cam settings, set it o 1 channel to decode default cam, and al other boxes i put a mark in...
TV-Server Version: 1.0
MediaPortal Version: 1.0
MediaPortal Skin:
Windows Version: Vista
CPU Type: Intel(R)Core(TM)2 CPU 6300...
password
Hi,
I think it is sa / MediaPortal, isn't it??
regards
Dietmar
password
Hi,
I think it is sa / MediaPortal, isn't it??
regards
Dietmar
Hi,
How would you install Mediaportal and TV server manually in Windows Seven Beta as the installer does not allow that?
Thank you,
Right, but the b key won't go back through the other menus like escape does. I guess I'm looking for the same key to do multiple things depending on context, or just to disable the "inline" player completely.
Right, but the b key won't go back through the other menus like escape does. I guess I'm looking for the same key to do multiple...
I have what I hope is a very simple question. Is it possible to have MP stop playing a video and exit back to the menu just by...
Thanks. The Hint was really helpfully and help me to find the solution. So here it is on Vista. Not that easy, as I thought.
C:\Documents and Settings\All Users\Team MediaPortal under Vista is mapping to the real path C:\ProgramData\Team MediaPortal and there is a keymap.xml, but it is not the right. That keymap.xml describes the...
Thanks. The Hint was really helpfully and help me to find the solution. So here it is on Vista. Not that easy, as I thought...
TV-Server Version: 1.0.0.21149
MediaPortal Version: 1.0.0.21149
MediaPortal Skin: Blue3
Windows Version: WinVista 64Bit Business...