General talk regarding our HTPC-software MediaPortal 1 takes place here.
I'm with you, LOL.
First, i'm with MP almost since the beginning. But with all the changes done in the past, i'm also at loss with setting up the tv server. I mean how complicated could it be to set up the program to access on one side ATSC via a Dvico card, and having a second option with an external converter box connected via...
I'm with you, LOL.
First, i'm with MP almost since the beginning. But with all the changes done in the past, i'm also at loss with...
do current instructions for setting up the epg and mapping to channels for clear qam channels exist?
it is hard to try new...
I did some searching and found all kinds of DirecTV related posts but it seems that all were with regard to how to record from DirecTV, control the reciever through the serial port, or trying to get the USB port control to work.
What I did not find and I think would be a handy feature is the ability to play the recordings which...
I did some searching and found all kinds of DirecTV related posts but it seems that all were with regard to how to record from...
I did some searching and found all kinds of DirecTV related posts but it seems that all were with regard to how to record from...
See this thread... same problem.
https://forum.team-mediaportal.com/mediaportal-1-1-0-rc-1-496/tvservice-dying-very-often-78740/
cheers
See this thread... same problem...
I have attached the Logs to the TV server, but in short what I did was upgraded to mediaportal 1.1.0 RC1 and now the TV Service...
if your card has loop back out its posible
if your card has loop back out its posible
Hi all!
Is there any way or idea to include a LNB Sharing patch for MP? It is a one cable soloution to view Live TV and record TV...
As the title says, is there a way to delay playback of a video file for say several seconds after it is selected? The reason I ask is because I am using the built in Refresh Rate Changer in Media Portal, and when it changes from 60hz to 24hz, there are a few seconds where the video is playing but there is no video/sound because the...
As the title says, is there a way to delay playback of a video file for say several seconds after it is selected? The reason I ask...
As the title says, is there a way to delay playback of a video file for say several seconds after it is selected? The reason I ask...
Tourettes has a great sig
I can confirm this feature of mediaportal. :-)
Just watched a recording of New Zealand Vs Australia cricket. The recording stopped right as Aussie Ryan Harris delivered the ball and Kiwi Daniel Vettori moved to play...
From the internet I discover that Vettori was dismissed giving Australia the...
Tourettes has a great sig
I can confirm this feature of mediaportal. :-)
Just watched a recording of New Zealand Vs...
Tourettes has a great sig
I can confirm this feature of mediaportal. :-)
Just watched a recording of New Zealand Vs...
Yes but I'm perhaps wrong ;-)
Yes but I'm perhaps wrong ;-)
hi all
I need your help!
I have a skystar HD 2 and tv server cant find my card.
I have seen other user that they use this card...
Hi,
robcarter, to make a good music collection better it has to be tagged correct & that work just have to be done, said that MPTagThat can help you with it, but in the end it's up to you (not all of your 8000 files have to be tagged with own AlbumArtist, just those album where different artists/band occurs like in Mixtapes etc, for...
Hi,
robcarter, to make a good music collection better it has to be tagged correct & that work just have to be done, said that...
I often read people using "file"-viewing for MP's music part, and it always makes me wonder ....
WHY?
It seems that the answer is...
Hi doveman :)
I looked up your deleted post and found it in the "MediaPortal 1.1.0 RC 1" sub forum. This sub forum was specifically created for issues with the just-released version.
Quote from the release notes:
That sub-forum also has the following sticky thread...
Hi doveman :)
I looked up your deleted post and found it in the "MediaPortal 1.1.0 RC 1" sub forum. This sub forum was...
It's rather frustrating when I've taken the time to detail a bug and the steps involved to make it happen only to have my thread...
Hi Great project and I just installed the newest RC
Maybe a dumb question, but I never started using the movie database functions.
I tried to use it but then I have to be in the configuration program?
Is it possibe to do automatic updates of the database while PM is running?
I use MP with shared folders on an other PC where I...
Hi Great project and I just installed the newest RC
Maybe a dumb question, but I never started using the movie database functions...
Hi Great project and I just installed the newest RC
Maybe a dumb question, but I never started using the movie database functions...
I did, but this does not apply.
I do not put my HTPC into standby, only the server.
When HTPC turns on, it wakes up the server with WOL. Problem is that TV does not always work and a restart of MP client is required ( only MP, not complete reboot ).
Anyway, the problem is solved by using 1.1.0 RC1 and MPTray. I was using...
I did, but this does not apply.
I do not put my HTPC into standby, only the server.
When HTPC turns on, it wakes up the server...
Do any of you have a way to make this possible ?
I would like to option to re-start MP from within MP.
Currently it is possible...
I agree with you. In fact, I've got DVBViewer installed in my system so I can move my dish with it. If you have a "preferred" satellite you want to see and record channels of, you can configure MP as no diseqc system, and make a profit of its reliability. If you see usually channels for more than 1 satellite, then it's not a solution...
I agree with you. In fact, I've got DVBViewer installed in my system so I can move my dish with it. If you have a "preferred"...
Hi
I currently have a motorised satellite dish which I manually control when using MP.
I.e. I make sure the dish is pointing...
After reading this thread yesterday I actually went home and spent some time setting up and using WMC7. Compared to a completed and customised MediaPortal install it's horrible!
For the record I'm comparing it to my config of MP 1.1 BETA with the X-Factor skin, TV Series and Moving Pictures but not much else (yet :) ). Windows 7...
After reading this thread yesterday I actually went home and spent some time setting up and using WMC7. Compared to a completed and...
So I am reading lots of posts of folks loading MP 1.1 on Win 7. I am wondering what is motivating you to do this? I have run and...
https://forum.team-mediaportal.com/general-support-51/multiple-tv-servers-76573/
https://forum.team-mediaportal.com/general-support-51/multiple-tv-servers-76573/
Hello.
I'm portuguese, so sorry for my english.
I have a ideia that i don't know if it is possible.
Well, que objective is...
Hi :)
Most MediaPortal settings are inside mediaportal.xml.
Not sure about TVServer, but I suspect it is inside the SQL database.
Other files stored across various directories. Peek inside mediaportaldirs.xml for more information.
Hi :)
Most MediaPortal settings are inside mediaportal.xml.
Not sure about TVServer, but I suspect it is inside the SQL database...
Hi Guys
I couldn't make my mind up where to post this (in here or under support > Installation and Configuration) so here goes...
Downzy ... this may be of interest
DigitalNow
Downzy ... this may be of interest
DigitalNow
G'day,
For the Aussies on the forum, you would probably know that digital radio is being rolled out across Australia and has...
I've been reading lots about motorized dish and the problems related to them so i have shyed away and stuck with DVB-T for now and its been great. and loved it for over a year.
But i have been offered a full DVB-S setup, mortorised dish and a Dreambox 500S would it be possible to have this on and use mediaportal to control the...
I've been reading lots about motorized dish and the problems related to them so i have shyed away and stuck with DVB-T for now and...
I've been reading lots about motorized dish and the problems related to them so i have shyed away and stuck with DVB-T for now and...
Ah, I thought it had moved but couldn't remember when/where or if I was deluded (probably true but not relevant here). Thank you.
Ah, I thought it had moved but couldn't remember when/where or if I was deluded (probably true but not relevant here). Thank you.
This is stupid but where can I download the sources for MediaPortal.
I've got an old link to SourceForge (and have a login) but...
Hi yhoogi,
i am having problems with the LightsOut script for WHS you were talking about in this thread : https://forum.team-mediaportal.com/mediaportal-1-talk-45/tv-server-whs-collection-fixes-workarounds-69731/ so i decided to start a dedicated thread for all interested parties to see.
As per your original instructions, here is...
Hi yhoogi,
i am having problems with the LightsOut script for WHS you were talking about in this thread ...
Hi yhoogi,
i am having problems with the LightsOut script for WHS you were talking about in this thread ...
well it's all beyond me really!
well it's all beyond me really!
What is the difference? They seem to do exactly the same thing.
I'm trying to get a solid image behind the thumbs in Small Icon...
Hi! I Have the same problem.
I have lcd tv connected via hdmi as second monitor, when i use only MP and have mp at foreground i have over 50fps, but if i do something at first monitor in same time mp fps is only 9 fps. I use MP 1.1.0.0 and Windows 7.
Is any way to fix it ?
Hi! I Have the same problem.
I have lcd tv connected via hdmi as second monitor, when i use only MP and have mp at foreground i...
milkdrop runs at an awful 9fps unless mediaportal window has the focus on the taskbar.
i had this problem on my old setup and...
I think you did a great job of explaining what you meant. :) I just wanted to make sure people understand the difference between supported and recommended - because i have found that even reasonable, intelligent people sometimes don't understand its meaning. I blame that knowledge on working IT support in my younger years. :D
MP...
I think you did a great job of explaining what you meant. :) I just wanted to make sure people understand the difference between...
Hello,
Why can't I use MP to do things it is made for? I mean, I can't watch TV (My dvbs card is officialy supported, but I...
Could you run a test on some cities in Germany on yr.no to see how good it is there? I don't know the name of many smaller cities in Germany, but both Cottbus and Hoffenheim are available on yr.no.
They have more then 6.3 million places world wide.
Could you run a test on some cities in Germany on yr.no to see how good it is there? I don't know the name of many smaller cities...
Is there an alternative source for the weather information in MP?
Or alternatively a different plug-in?
I'm finding the...
Yes, i have a netgear usb wifi dongle
As usualsuspect say the problem is not there, i also tried booting system without usb dongle with same results
At the moment (with 60 seconds timeout) i have a VERY slow system boot, but at least a fully working and starting tvservice...
Yes, i have a netgear usb wifi dongle
As usualsuspect say the problem is not there, i also tried booting system without usb dongle...
Hello
My tv server service is not loading at startup
in event viewer i have errors about a 30000 ms timeout
i don't paste the...
Have a look at XBMC (xbmc.org). It has a very clean interface and numerous options. I bounce between it and MP, depending on my mood. BTW, you can install MP without the TV functions.
Boxee is based off XBMC, but adds social networking to the interface. I couldn't get it to work correctly, but I would encourage you to have a look...
Have a look at XBMC (xbmc.org). It has a very clean interface and numerous options. I bounce between it and MP, depending on my...
Hello,
Forgive my question if it seems ignorant but then ignorance is simply the lack of understanding. Boy am I lacking here...
the next RC is going to quality, can wait guys.
Finger is on the donate button for next final :D
take care MP team.
the next RC is going to quality, can wait guys.
Finger is on the donate button for next final :D
take care MP team.
Hi,
I couldn't find a summary of the major differences/feautures between version 1.0.2 and 1.1.0.
I could read the entire...
Sounds great! Today im using version 1.02 and it works fine with one TV-card but when i use two or three is begin to be unstable to handle the CI and to code.:thx:
Sounds great! Today im using version 1.02 and it works fine with one TV-card but when i use two or three is begin to be unstable to...
Hi,
in my server i got 3 FireDTV Cards and form time to time i dropps the CI-model so my recording is not working.
Then i have...
Thanks gxtracker
This is pretty much what Im planning on doing.
WinXP (or Windows 7 in the future ... but my XP box with TVServer is running sweetly) as the host with VMWare Server installed as an "app".
From there, Im guessing I have no problems with needing special hacking in XP.
Then within VMWare I can virtualise my other home...
Thanks gxtracker
This is pretty much what Im planning on doing.
WinXP (or Windows 7 in the future ... but my XP box with TVServer...
Hi all,
I have been thinking a while to migrate my current XP (32 bit) setup to a windows server (I think 2003 then, maybe 2008)...
Hey guys,
moved things to a new thread;
https://forum.team-mediaportal.com/offtopic-57/server-console-again-74545/index2.html#post563446
It's getting there, testers apply! :)
Hey guys,
moved things to a new thread...
Hi all,
I really like how MP is more and more moving towards an online based system.
There are a lot of plugins using online...
I also had problems with DriveSpeed and Daemon Tools (and pretty much any program that works with discs/images), what I did was configure AnyDVD to start a batch file every time a disc is inserted, for all types of disks. The batch file starts DriveSpeed, waits a few seconds (2 is enough) for it to apply the speed to the drive, and...
I also had problems with DriveSpeed and Daemon Tools (and pretty much any program that works with discs/images), what I did was...
Hi
Is there a good alternative to Nero Drivespeed? For some reason ISOs (on network drive) won't mount in Daemon Tools when Nero...
