I believe I have everything working now. I upgraded Media Portal, so now I have the fun of redoing everything, but now after following the above steps I have it working. Man I must have been using a very old release. Thanks for your help.
I believe I have everything working now. I upgraded Media Portal, so now I have the fun of redoing everything, but now after...
I have videos in two formats. Some are ripped dvds in Video_TS folders that work perfectly. I also have some videos in .mp4...
You have the process plugin 'External Display' enabled and configured as type 'Debug Form'.
If you do not have an external display (refers to VFD's etc) then best just disable this plugin.
Trevor
You have the process plugin 'External Display' enabled and configured as type 'Debug Form'.
If you do not have an external...
Hi,
Been using mediaportal of a few weeks now and I love it!
Just have a small problem with the Status window (see attachment)...
ok ,i put another movie and aafter 24 minutes the screen changed its size from letterbox to original, 10 minutes after this change, mp changed to my weather , i put it back on my dvd and letterbox size and 24 minutes later the same changes again from letterbox to original size, 10 minutes again to my weather.
solved,
it is the my...
ok ,i put another movie and aafter 24 minutes the screen changed its size from letterbox to original, 10 minutes after this change...
hi, i need advice on this.
i start mediaportal and if i'm watching a dvd , every 5 minutes the movie stops and goes to the...
Thanks, I couldn't get it to pass on thru to the tvguide when I ordered on the TV Channels tab so found I had to do it thru the All Channels group; worked OK.
Thanks,
J
Thanks, I couldn't get it to pass on thru to the tvguide when I ordered on the TV Channels tab so found I had to do it thru the All...
Hello,
I have been trying MediaPortal out after recently upgrading my HTPC, I would like to know what is the easiest way of...
PCPete - what version are you installing? Some of the MP1 builds checked for supported platforms, and refused to install. Most will install with just a warning message you click through.
If it won't install, try a different build. I believe this check was removed for RC2. Way easier than trying to "fix" the installer, I would...
PCPete - what version are you installing? Some of the MP1 builds checked for supported platforms, and refused to install. Most...
Hi all,
I'd like to understand why MP isn't currently supported on XP x64.
I know other folks have asked similar questions...
Thanks for the info. I will give it a try tonight.
Thanks for the info. I will give it a try tonight.
Hello,
I just found Mediaportal last night. I have a mediaserver box by netgear that someone gave me when they could not get it...
Yes, the thing is that it is the TV-Series database that I would like to only have to set up once. The movies already have a centralised DB with AMC and MyFilms, and the TV part is sentralised on the server. But we'd like to keep our "watched" setups separate, so I guess it's not an option, thanks tough :)
Yes, the thing is that it is the TV-Series database that I would like to only have to set up once. The movies already have a...
I'm lokking at setting up the centralised database setup:
UserGuides/CentralisedDatabases - MediaPortal Wiki Documentation...
Thanks for the reply- no there is not iv just tried to install it again now and get this error report. I dont know what this means .?
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ComponentModel.Win32Exception...
Thanks for the reply- no there is not iv just tried to install it again now and get this error report. I dont know what this means...
Hi, i installed MP the other day with the old tv thing, I just re installed and tried to make tv-server the preferance. Im...
You speak about automatically starting MP after booting?
If so then this can be done via MP configuration.
You speak about automatically starting MP after booting?
If so then this can be done via MP configuration.
I set up media portal to record a programme while i was out - i had turned mp. off (but left the computer on) . I asumed that it...
it is no need 2 disable UAC (works fine with UAC)
it is no need 2 disable UAC (works fine with UAC)
I can`t get media portal to work with vista 64bit?
when will this be available...
thankyou..:D:thx:
PW is case sensitive
this was my first failure after installation too ... :)
:)
SEA
PW is case sensitive
this was my first failure after installation too ... :)
:)
SEA
I know im really being thick here guys...but im just playing around on my lappy trying to get the webepg to work before i take...
Hello all,
I'm using the normal Media Portal and the monochrome skin. I've set in settings:
General / Thumbnails to 100 + 400 Small CRTs - Max Speed Minimum Quality Setting (even though it's being displayed on a 40inch LCD).
The hardware I am using is 4GB Ram, Q6660 Quad core, Geforce 9800 GTx and a samsung spinpoint F1...
Hello all,
I'm using the normal Media Portal and the monochrome skin. I've set in settings:
General / Thumbnails to 100 +...
Hello all,
I'm using the normal Media Portal and the monochrome skin. I've set in settings:
General / Thumbnails to 100 +...
Hi i can't find any way to get this to work... can somone help?
I would like media portal to start playing back a default slideshow after X seconds of either inactivity or of music playback.
basicly i have MP machine as a music player connected to a LCD screen. I'd like my family pictures to be played through. however i don't...
Hi i can't find any way to get this to work... can somone help?
I would like media portal to start playing back a default...
Hi i can't find any way to get this to work... can somone help?
I would like media portal to start playing back a default...
Why is this resolution necessary, is it because of the graphics card (needs to be dx9 with 128mb memory) or just the monitor\tv you are outputting too only supports this.
Regards
Why is this resolution necessary, is it because of the graphics card (needs to be dx9 with 128mb memory) or just the monitor\tv you...
Hi to all ,
I have a question ,
I have a system PC based with a display resolution of 640X240 pixels .
Can I use mediaportal ...
Open MP config, at the top is a link to where your user files are now stored, there you will find the file you are looking for.
Regards
Open MP config, at the top is a link to where your user files are now stored, there you will find the file you are looking for...
Just had to do a re install of xp and downloaded this newer version of mediaportal- in the past i have modified the...
Sorry, forgot to mention that I intend on paying for help with this.
Thx,
Kevin
Sorry, forgot to mention that I intend on paying for help with this.
Thx,
Kevin
I have had my new Media PC sitting here for 4 months now and I just do not have the time to complete the build so I am looking for...
Thanks...
nice forum too...usually when you post for questions in a forum and you don't have everything in the world immediately available for everyone, they bite your head off...
when i get home later tonight i'll get that info together...
thanks again
hm..my graphics card is old and only seems to support 6.11 according to...
Thanks...
nice forum too...usually when you post for questions in a forum and you don't have everything in the world immediately...
Hey guys...
I used Media Portal a while back...(version 0.2 or 0.3 etc.) I recently hooked my PC back up to the TV, downloaded...
Hi - I am playing around to set up radio stations. I downloaded the Canadian stations from the "webstream" site in mediaportal and linked the folder easily in myRadio. When I extracted the RAR file the folders already had the asx files readily listed.
MEDIAPORTAL - free MediaCenter HTPC Software - Canadian Radio
After this...
Hi - I am playing around to set up radio stations. I downloaded the Canadian stations from the "webstream" site in mediaportal and...
Hi - I am playing around to set up radio stations. I downloaded the Canadian stations from the "webstream" site in mediaportal and...
Hi,
I've purchased a no-name MCE remote which is recognised as a generic HID device. I'm trying to map the F3 key (used to show imdb information) onto a key on the remote. Any tips on how and the best way to go about it?
Also, I've installed the TV series plugin however I can't seem to view any of the information within MP...
Hi,
I've purchased a no-name MCE remote which is recognised as a generic HID device. I'm trying to map the F3 key (used to show...
Hi,
I've purchased a no-name MCE remote which is recognised as a generic HID device. I'm trying to map the F3 key (used to show...
Hi,
I'm using MediaPortal with my Nebula DigiTV PCI -card and it works well. Now I'd like to install remote control. Can I use MediaPortal with my original Nebula Remote Control?
If the answer is yes, could someone give me instructions how to configure this combination.
Thnx.
Hi,
I'm using MediaPortal with my Nebula DigiTV PCI -card and it works well. Now I'd like to install remote control. Can I use...
Hi,
I'm using MediaPortal with my Nebula DigiTV PCI -card and it works well. Now I'd like to install remote control. Can I use...
Thanks for the reply! I don't know what a mux is, but that is great news about multiple channels. Do you happen to know what the difference is in that SiliconDust lan item vs like an internal card with dual tuners? The network function on it confuses me. lol...
Jasems
Thanks for the reply! I don't know what a mux is, but that is great news about multiple channels. Do you happen to know what the...
I hope this is the right spot for this question... I am new afterall lol...
I am moving to a location that has very limited...
Ah, unchecked the remote in config, and then it went back to normal, thank you.
Ah, unchecked the remote in config, and then it went back to normal, thank you.
Hi, my MCE remote keeps sending the signal twice, if I for example press pause, it first pauses and then unpauses. Anyone...
i have been using mediaportal for a while now on my bed room for showing videos etc. But i have never got as far to buy a tv card that is supported. But yesterday i got an idea! i used my usb dongle (syntek STK 1160) an connected that one to mye very old vcr an tuned in the tv signals fro my cable. And then I installed the cam player...
i have been using mediaportal for a while now on my bed room for showing videos etc. But i have never got as far to buy a tv card...
i have been using mediaportal for a while now on my bed room for showing videos etc. But i have never got as far to buy a tv card...
Where do i go to change the password...i've been looking?
Where do i go to change the password...i've been looking?
I inherited a PC with Media Portal installed and it’s working fine, TV – everything.
I would now like to connect via my laptop. I...
Use the iMon Manager software to set up a profile for MediaPortal, mapping the appropriate buttons to keyboard shortcuts. You'll find a list of shortcuts here (KeyboardShortcuts - MediaPortal Wiki Documentation). You will also find the ShortCut'er plugin very useful for setting up some custom keyboard shortcuts for things like TV...
Use the iMon Manager software to set up a profile for MediaPortal, mapping the appropriate buttons to keyboard shortcuts. You'll...
Hi
I have a Mstation 1000 cabinet with Imon remotecontrol
How can i make thise remote work with MediaPortal?
-Kjell
I am using MP as shell since I started with my first HTPC about 2 years ago. It is running like a charm, except of the common problems related to MP itself.
One thing you should keep in mind is, that some default autostart stuff might not work, as it is fired only when using explorer.exe as shell. So some background tasks might not...
I am using MP as shell since I started with my first HTPC about 2 years ago. It is running like a charm, except of the common...
I would like MediaPortal to run as a shell instead of a Windows XP OS. This is so that when I start my media pc, only MediaPortal...
try this TV-Server/Configuration/TVServers/ScanDVBT - MediaPortal Wiki Documentation
/Juppe
try this TV-Server/Configuration/TVServers/ScanDVBT - MediaPortal Wiki Documentation
/Juppe
I don't know what am I doing wrong. I have MP 1 RC2 with TV-server.
Neither in MP configuration, nor in TV-Server configuration I...
A process plugin is something that runs in the background and has no window of its own. The PowedScheduler plugin is an example.
A windows plugin has a window of its own, such as "MyMusic". Of course Music can also run int he background of other windows, but it doesn't run all the time and is manually started.
I guess MyTV is...
A process plugin is something that runs in the background and has no window of its own. The PowedScheduler plugin is an example...
Hey there, i've been using / testing MP for a couple of weeks now and I have to say I am very impressed. The only thing what I do...
Thanks Furetto - that got me started!
Thanks Furetto - that got me started!
Forgive me for being a bit dumb, but I can't find svn builds for 1.0 rc2. What am I missing? Any help would good.
since some weeks i have a seriously bad picture quality. the colours seem to have steps as they change like if i had a 16-bit picture.
i tried different codecs, i tried a dvd with power dvd, i installed powerstrip - no improvement.
does anyone have a clue what i could do else?
to have a better understandiing i attached two screenshots
since some weeks i have a seriously bad picture quality. the colours seem to have steps as they change like if i had a 16-bit...
since some weeks i have a seriously bad picture quality. the colours seem to have steps as they change like if i had a 16-bit...