Visualisations in 1.2Beta (1 Viewer)

BugsBunny

Portal Pro
April 22, 2006
214
25
Tirol
Home Country
Austria Austria
I've got milkdrop working on mp 1.2 beta + XPSP3 relatively fast (I've been reading the text file with the instructions) but it's not working very well.
As others stated the song name is not displayed.
Also the vis is a bit strange it seems to run at full fps a bit then it slows down the frame rate and it looks a bit choppy then runs at full frame rate again and so on (normal-slow-normal-slow-normal-slow....).
It looks strange - maybe it has something to do with "the not responding to music".

I've got the energy saver of MP disabled (that reduces fps to save energy when idle). In older versions this caused some issues with milkdrop. But now even when disabled vis is not working like it should. Using winamp on the same machine milkdrop runs just fine.
 

cane

MP Donator
  • Premium Supporter
  • October 20, 2007
    129
    48
    Zagreb
    Home Country
    Croatia Croatia
    I got milkdrop to work after installing C++ 2008 sp1 (x86) redist, as already mentioned in this thread.
    It is normally working while listening to music, but I can't start visualization while listening to radio - web stream configured in TV server. Before I used stream radio plugin, but now I tried in 1.2 Beta with configured web streams in radio section of TV server.
    Is it a bug within 1.2 Beta, or it just that I'm having some problems?
     

    SilentException

    Retired Team Member
  • Premium Supporter
  • October 27, 2008
    2,617
    1,130
    Rijeka, Croatia
    Home Country
    Croatia Croatia
    OK - I've had a good old play with this now and can confirm that the vis seems to not react to the music.
    I am going to do a little more playing though, I have a couple of ideas as to the problem, and I'll post back here once I have more info :)

    Working on it...

    Any news? :D

    I got milkdrop to work after installing C++ 2008 sp1 (x86) redist, as already mentioned in this thread.
    It is normally working while listening to music, but I can't start visualization while listening to radio - web stream configured in TV server. Before I used stream radio plugin, but now I tried in 1.2 Beta with configured web streams in radio section of TV server.
    Is it a bug within 1.2 Beta, or it just that I'm having some problems?

    Hi, as far as I know, radio doesn't use BASS player therefore, no visualizations are possible. It's a technical limitation. :)
     

    emphatic

    Design Group
  • Team MediaPortal
  • August 25, 2006
    3,754
    1,242
    Alingsås
    Home Country
    Sweden Sweden
    I moved my Winamp visualizations to the correct folder just now, so they do show up in the Configuration! But I only get a black screen with Milkdrop when I play music. :(
    I've been using the old version linked to hear some time ago, so I'm gonna install WinAmp now and lift the fresh one and try that now.

    Cheers
    Emph
     

    diskeeper

    Portal Pro
    January 5, 2007
    6,109
    421
    Dortmund
    Home Country
    Germany Germany
    AW: Re: Visualisations in 1.2Beta

    I moved my Winamp visualizations to the correct folder just now, so they do show up in the Configuration! But I only get a black screen with Milkdrop when I play music. :(

    C:\Program Files (x86)\Team MediaPortal\MediaPortal\plugins\Milkdrop2\
    C:\Program Files (x86)\Team MediaPortal\MediaPortal\plugins\vis_milk2.dll
    C:\Program Files (x86)\Team MediaPortal\MediaPortal\plugins\milk2.ini
    :)
     

    emphatic

    Design Group
  • Team MediaPortal
  • August 25, 2006
    3,754
    1,242
    Alingsås
    Home Country
    Sweden Sweden
    It worked right away by just copying in the latest plugins for me. In addition to Milkdrop working (wow, it's incredible), I also got the Advanced Visualization that comes as an extra with WinAmp to work, but my computer's not fast enough for that one, so I'm gonna stick with Milkdrop. As far as I can tell it's moving to the music, because nothing ever feels "static".

    I'm using digital output from my external SoundBlaster Live! to my receiver if that narrows anything down for finding out why it doesn't react to music for some users.

    Emph
     

    SpudR

    Retired Team Member
  • Premium Supporter
  • July 27, 2007
    2,657
    718
    Yorkshire, UK
    Home Country
    England England
    Sorry guys - been away for a bit!
    Will test later, but I do think that it's not responding...
     

    Paranoid Delusion

    Moderation Manager
  • Premium Supporter
  • June 13, 2005
    13,052
    2,978
    Cheshire
    Home Country
    United Kingdom United Kingdom
    Does not seem to be pulsing to the beat for me, also has anyone got track name being displayed when changed.

    All settings on default within milkdrop config, set in MP config to show name.
     

    SpudR

    Retired Team Member
  • Premium Supporter
  • July 27, 2007
    2,657
    718
    Yorkshire, UK
    Home Country
    England England
    Ok - I've been playing to and it definitely does NOT react to the beat, nor (as stated all over this thread) does it show the track info.
    I have tried with different output settings, different frame rates and 'playing' with the options within the vis - all to no avail :(

    I don't think I have any old versions of Milkdrop to test, but I believe that there will be an old version somewhere - could someone test an older version and report back please?
     

    Users who are viewing this thread

    Similar threads

    Thank you for pointing out that my analysis may be less than accurate. :eek: :p Although the change to TV channel 71 may not also have been applied to the independent radio channels (different MUXes), the logs that I prepared for one of the development team does show a difference between channel 704 ("BBC Radio 4") and channel 731...
    Thank you for pointing out that my analysis may be less than accurate. :eek: :p Although the change to TV channel 71 may not also...
    I have just discovered that I can no longer receive any of the independent radio channels broadcast on DVB-T in the UK. In...
    Replies
    10
    Views
    2K
    MP2 appeared later, and it was not published in the general documentation, they immediately made a section for it, so everything that is not in the MP2 section is for MP1, but due to multiple changes and migrations, something could have been lost, but the documentation is available. Also for MP1 you can just take any existing plugin...
    MP2 appeared later, and it was not published in the general documentation, they immediately made a section for it, so everything...
    Why cant I download any of this info? Thanks
    Replies
    3
    Views
    1K
    My bad, I misunderstood your post then :) Yeah, these things can get complicated really quickly. I remember scrapping some of my skin-improvement-ideas because I couldn't get these cross-dependencies sorted out.
    My bad, I misunderstood your post then :) Yeah, these things can get complicated really quickly. I remember scrapping some of my...
    I adjusted the MyMusicPlayingNowInfos.xml for my OldEyes variant of DWHD so it fits without crowding. I now have the issue of text...
    Replies
    7
    Views
    2K
    I'm running 2.5 with the WMC skin. I have .mp4 files, along with the related .srt files in the same folder. I can watch the movies just fine. In past versions of MP, like 2.4x, I could press the More Info button on my remote twice, and on the second press, an option for showing/choosing the subtitles was listed. I'd select the...
    I'm running 2.5 with the WMC skin. I have .mp4 files, along with the related .srt files in the same folder. I can watch the...
    I'm running 2.5 with the WMC skin. I have .mp4 files, along with the related .srt files in the same folder. I can watch the...
    Replies
    0
    Views
    3K
    This is for the tvserver, the iptv part. It used to only support m3u files containing all the channels, but now you can use a m3u8 too. Usually you get an m3u8 from your iptv provider, but there are also some that can be found on the internet
    This is for the tvserver, the iptv part. It used to only support m3u files containing all the channels, but now you can use a m3u8...
    Hi! I read about [MP1-5236] - Add support for m3u8 files, but I can't find info on how to use this. So, where and how can I use...
    Replies
    1
    Views
    964
    Top Bottom