Post problems you have when using MediaPortal,
or pre installation questions in here.
Thanks for that!
Thanks for that!
Hi,
can anyone tell me which drivers to use for this card? Do I use the 150MCE drivers or standard PVR150 drivers? The reason I...
hello,
sorry I can't help you, but perhaps you can help other peoples that have a nvtv card that don't work anymore with RC2.
(see post : http://nolanparty.com/mediaportal.sourceforge.net/phpBB2/viewtopic.php?t=11646 and http://nolanparty.com/mediaportal.sourceforge.net/phpBB2/viewtopic.php?t=12032&highlight=nvtv)
can you...
hello,
sorry I can't help you, but perhaps you can help other peoples that have a nvtv card that don't work anymore with RC2...
I have a Tsunami media center with a NVTV card.
I instaled a MP RC02 (OK)
I instaled a card Sk2 Star and every thing was ok. I...
Hi Helmut,
I just tried, and the little green button next to the lower left button has the same function as the "start" or "green" button on the center of the remote. It just takes you to the home screen of MediaPortal.
Kind regards,
Michel
Hi Helmut,
I just tried, and the little green button next to the lower left button has the same function as the "start" or...
Got the European MCE Remote, 4 coloured buttons at the bottom. Looks exactly as it is displayed in Configuration -> Remotes.
So i...
mediaportal RC2 crash after selection in epg,
the following log file was created:
6-1-2006 23:01:57 SQL:TVDatabaseV21.db3 cmd:sqlite3_step err:ERROR detailed:SQL logic error or missing database query:vacuum
6-1-2006 23:01:57 TVDatabase exception err:SQL:TVDatabaseV21.db3 cmd:sqlite3_step err:ERROR detailed:SQL logic error or...
mediaportal RC2 crash after selection in epg,
the following log file was created:
6-1-2006 23:01:57 SQL:TVDatabaseV21.db3...
mediaportal RC2 crash after selection in epg,
the following log file was created:
6-1-2006 23:01:57 SQL:TVDatabaseV21.db3...
from www.comprousa.com ver 1.3.3.0
(I've not tried them yet..., not sure what's new)
BigJ.
from www.comprousa.com ver 1.3.3.0
(I've not tried them yet..., not sure what's new)
BigJ.
from www.comprousa.com ver 1.3.3.0
(I've not tried them yet..., not sure what's new)
BigJ.
I have the same problem, learn codes goes straight to success even when I haven't pressed a button on the remote, and when I test the IR Bud doesn't flash...
Any ideas, this is the only thing stopping me ditching MCE for MediaPortal... i'm trying to learn a Sky Digital UK remote.
Cheers
I have the same problem, learn codes goes straight to success even when I haven't pressed a button on the remote, and when I test...
:roll: :roll:
Problem with MyBlaster
stuff I have tried:
myblaster.exe into C:\X folder
myblaster.dll into the same...
I just installed the latest RC2. How can I fix this?
I just installed the latest RC2. How can I fix this?
I just installed the latest RC2. How can I fix this?
In itself, the MCE remote, with the IR extenders can make the other two obsolete. May be less glossy than other proposed solutions, but it's no problem whatsoever.
In itself, the MCE remote, with the IR extenders can make the other two obsolete. May be less glossy than other proposed solutions...
Hi guys I'm currently i the hunt for a remote I can use with my HTPC, TV & Tuner Card and was hoping someone could make a...
You can always cut out the stuff you don't use, such as other skins, maybe plugins even? I have no idea how much space this would save you, though.
You can always cut out the stuff you don't use, such as other skins, maybe plugins even? I have no idea how much space this would...
I'm just toying with an idea for MP & need to know the average value of a fully installed MP? I've got a 2.2GB HDD & need to get...
nuts...i'm stuck in a dorm room the size of a large walk in closet and i have a desk and a bed and that's all that can really fit comfortably.....i also have a 21 inch monitor so a tv is out of the question
thanks for the replies though :)
nuts...i'm stuck in a dorm room the size of a large walk in closet and i have a desk and a bed and that's all that can really fit...
first off i wanna say thanks to all the devs who worked so hard on this program being as this is my first post.
with that out of...
excellent. Thanks very much
excellent. Thanks very much
Hi
I cannot find where to change the storage path for recorded TV. None of the screenshots for recording that are shown in the...
No keep DirectX9. I meant the card is a DX8.1 card meaning it will handle that itself. The CPU will take the left over DX9 instructions itself.
0130 is the stable release and 0200 so far is only release candidates. Dont let that put you off though, some of the late CVS builds have been looking VERY good indeed. (worthy of finally...
No keep DirectX9. I meant the card is a DX8.1 card meaning it will handle that itself. The CPU will take the left over DX9...
I've been having problems running Media Portal (picture freezing and jerky scrolling credits / titles) and someone suggested...
How did you make MP work with a G400? I have the exact same specs (except my cpu is a 1GHz PIII).
When I first started up MediaPortal it complained about DirectX9 compability, and told me to install the full DX9 SDK.
I did so, and the program is now able to start.`
All menus are extremely slow though....
Are there any...
How did you make MP work with a G400? I have the exact same specs (except my cpu is a 1GHz PIII).
When I first started up...
Hi,
Can i run media portal on a machine with:
1 ghz
256 mb ram
Hauppauge WinTV PVR 150 or Hauppauge WinTV PVR 150MCE (oem)...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2005-12-16)
MediaPortal Skin: BlueTwo Metal Dark
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPEG/AC3/DTS/LPCM Audio Decoder
Video Codec: Mpeg2Dec Filter
CPU Type: Intel Pentium 4 - 2.66GHz
Memory...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2005-12-16)
MediaPortal Skin: BlueTwo Metal Dark
Windows Version...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2005-12-16)
MediaPortal Skin: BlueTwo Metal Dark
Windows Version...
Update: After using Rad light filtermanager and unregister MPEG2DEC and MPEG/AC3/DTS/LPCM audio decoder, nVidia took over! The taskbar icon is there, and also the aspect ratio is fixed :)
The video and audio rendrer settings seems to be ignored/broken in mediaportal setup.
Update: After using Rad light filtermanager and unregister MPEG2DEC and MPEG/AC3/DTS/LPCM audio decoder, nVidia took over! The...
Area: My TV
MP Version: CVS build 13/12/2005 (but has done it since I can remember)
Skin: BlueTwo
Windows Version: Windows XP...
An update: I get sound through the mobo speakers out jacks by defining default direct sound device as audio renderer in media portal movie player setup. Therefore the problem is only with TV and radio and the problem is the same with hauppauge wintv: sound only through spdif and stereo line.
An update: I get sound through the mobo speakers out jacks by defining default direct sound device as audio renderer in media...
After spending many hours and searching in internet I must admit I have reached a dead end.
My problem is that I would like to...
Has anybody tested the new driver and seen any changes?
/BigAl
Has anybody tested the new driver and seen any changes?
/BigAl
Has anybody tested the new driver and seen any changes?
/BigAl
Thanks for the reply,
Yes it is a Compro card, where do I get the BDA drivers from?
i fthey are the drivers on the media portla site then i have tried them and they still do not let me see the TV picture...
Lee
Thanks for the reply,
Yes it is a Compro card, where do I get the BDA drivers from?
i fthey are the drivers on the media...
Hell othere again,
well I have just spent another few hours playing around with the syatem and still no joy getting a TV picture...
- Poll
Hi,
I always had problems ith MP and my dual Blackgold gdi dvb-t tuner, never managed to record and watch at the same time for more than few minutes without crashes (Even with RC2).
But now....after
1) applying the famous patch
http://www.xpmediacentre.com.au/community/downloads.php?do=file&id=63&act=down
2) giving different...
Hi,
I always had problems ith MP and my dual Blackgold gdi dvb-t tuner, never managed to record and watch at the same time for...
Hi,
I've been playing with MP for a while but since the 11th of november I cannot use CVS and successfully run MYTV plugin.
I...
Well if the problem was known about, it would have been fixed in 0200RC2. If its still not fixed there, it must be an isolated problem and I would still look at that video card. You dont need another tv card to test, just a newer video card.
Well if the problem was known about, it would have been fixed in 0200RC2. If its still not fixed there, it must be an isolated...
Area: Media Portal Program / Media Portal Skin
MP Version: 0.1.3.0
Skin: all
Windows Version: Windoes XP Professional SP2
CPU...
I think you will find that analogue software TV cards are no longer supported in MediaPortal.
If you want a hybrid card (analogue and digital), then you will need to get one that has a hardware MPEG2 encoder - like the Hauppauge one - the WinTV-HVR-1300.
I think you will find that analogue software TV cards are no longer supported in MediaPortal.
If you want a hybrid card...
I'm getting a black scrren with the Compro VideoMate DVB-T300 when using it for analogue reception. It seems to find channels when...
Hi i've downloaded myblaster in an attempt to get mediaportal to change my set top box channels. How do I use it? I can't see it in the plugins list in mediaportal setup??
Please help.
Thanks,
Matt
Hi i've downloaded myblaster in an attempt to get mediaportal to change my set top box channels. How do I use it? I can't see it in...
Hi i've downloaded myblaster in an attempt to get mediaportal to change my set top box channels. How do I use it? I can't see it in...
At this point it might be helpful to go here
http://nolanparty.com/mediaportal.sourceforge.net/phpBB2/viewtopic.php?t=6439&sid=a47f8b2f8cc52aea9efb42cabd34e116
and then respond with your specs.
At this point it might be helpful to go here...
Hello.
I am new to media portal and have just purchased a Hauppage 150 MCE and am trying to get it to work in mediaportal...
up ->
up ->
I have gone from 0.2 RC1 to 0.2 RC2 and cant get my NVTV card to work. When I tries to search for files. I get a message like "...
When I run mediaportal there is a huge sound delay while watching TV, probably about 1 sec. This I dont get when running Windows MCE on same hardware setup. Any ideas?..
Thanks
When I run mediaportal there is a huge sound delay while watching TV, probably about 1 sec. This I dont get when running Windows...
When I run mediaportal there is a huge sound delay while watching TV, probably about 1 sec. This I dont get when running Windows...
I don't have one, but check this thread...
http://nolanparty.com/mediaportal.sourceforge.net/phpBB2/viewtopic.php?t=10543
I don't have one, but check this thread...
http://nolanparty.com/mediaportal.sourceforge.net/phpBB2/viewtopic.php?t=10543
Hi,
which DVB-S card would you recommend for MediaPortal. Right now I have a PVR350 and this card works very well, but I would...
Hi,
this does not sound like tearing. Anyway, tearing should be turned of with:
Setup->General
- Check "Use Exclusive DirectX Mode"
It more sounds like wrong "TV standard" setting:
Setup->Television->TV Channels->Edit->Analog
- TV Standard (PAL / NTSC - depends on your country)
Flip
Hi,
this does not sound like tearing. Anyway, tearing should be turned of with:
Setup->General
- Check "Use Exclusive...
Ive got a center that works great for everything else, music, videos, everything, but i've always had a problem with TV.
I'm using...
Same here, I have to press ESC.
It would be nice to be able to use the ChUp and ChDn keys, or the number keys in that situation.
Probably low priority...Developers: are you aware of this?
Same here, I have to press ESC.
It would be nice to be able to use the ChUp and ChDn keys, or the number keys in that...
Area: Media Portal Program
MP Version: RC2 , cvs-01-02-2006
Skin: default
Windows Version: XP Pro SP2
CPU Type: Athlon 64 3000...
Sorry I didn't get a chance to do this last night as I got home late from work. Will do it tonite...
Sorry I didn't get a chance to do this last night as I got home late from work. Will do it tonite...
Basically I'm running out of HD space. Ripping DVDs works great, but when you rip a DVD of a TV series and it takes up 7GB..... you...
Hmmm I also have this problem using my Nebula DigiTV and their latest BDA drivers. Will have a go with all the video codecs and post a reply
Oli
Hmmm I also have this problem using my Nebula DigiTV and their latest BDA drivers. Will have a go with all the video codecs and...
Hello,
I've just bought myself some brand new hardware to build a HTPC/fileserver.
My specs:
Asus K8N4-E
AMD Sempron 2600+...