To my knowledge Zalman don't make any smaller cases. Check out Silverstone GD01MX or Antec Fusion Remote for a smaller case with an LCD. The smaller cases have limited (1 or 2) internal drive bay capacities. If you're looking for the smallest then ditch the LCD/VFD altogether and go for an ITX based case and system, and build a...
To my knowledge Zalman don't make any smaller cases. Check out Silverstone GD01MX or Antec Fusion Remote for a smaller case with an...
hi i was searching a beautiful case for my htpc...
i like more zalman hd 503 but it is tooo big...
any case similar but smallest?
Oh, that's just accidental after browsing the web :)
I think I am at the point of buying the Case, Videocard and HDD. The remote and TV-card have to wait because i haven't decided wait to buy yet. I saw some treads about harmony remote's so maybe I will ask for info there.
Greetings E
Oh, that's just accidental after browsing the web :)
I think I am at the point of buying the Case, Videocard and HDD. The remote...
Hello al,
I'm currently busy selection the hardware for my first real HTPC project. I have been playing with MP and other Media...
Some user (a good looking user mind you ;) ) posted a video to his 20TB HTPC-server.
Post here
If it's totally overkill for what you're after, then my apologies for cluttering your thread..
Some user (a good looking user mind you ;) ) posted a video to his 20TB HTPC-server.
Post here
If it's totally overkill for what...
Hello,
i am looking for a HTPC-case which could handle more than the usual 1-2 hard discs.
I don't care a lot about design -...
Mmm ok,
So it will be hard for me to make a decision...
Thanks for the antec P-options but sadly the are to big for the tv-cabinet. (max 17cm high), The NSK can't house a full ATX motherboard. If I will go to Micro-atx then I will buy the GD05 from Silverstone. But that doesn't support ATX motherbord. So this is also no option...
Mmm ok,
So it will be hard for me to make a decision...
Thanks for the antec P-options but sadly the are to big for the...
Hello all,
I finally have some money to buy a HTPC case + videocard and some Harddisks. I have some questions about the system I...
Anyone knows this case?
Inter-Tech - Gehäuse, Netzteile und vieles mehr aus der Hardwarewelt
I'm interested in HTPC 2008-V (around 140,00/150,0 €).
Thanks for your feedback.
mamachan
Anyone knows this case?
Inter-Tech - Gehäuse, Netzteile und vieles mehr aus der Hardwarewelt
I'm interested in HTPC 2008-V...
Anyone knows this case?
Inter-Tech - Gehäuse, Netzteile und vieles mehr aus der Hardwarewelt
I'm interested in HTPC 2008-V...
Yes, I realised that just as I clicked submit :rolleyes:
It doesn't run hot at the moment, even with the fans running very slowly and it's only got a standard AMD OEM heatsink on the cpu (with a Noctua fan grafted on). With a bigger heatsink I reckon I'd _almost_ get away with turning the fans off completely, but the inside of the...
Yes, I realised that just as I clicked submit :rolleyes:
It doesn't run hot at the moment, even with the fans running very slowly...
I expected this to have come up before, but I couldn't find anything by searching the forum, so here goes:
My HTPC is in an...
I have the remote working completely. There was nothing special to do: I updated iMon software, the first update was a downloadable zip file. I had to remove the iMon version delivered with Antec case first, then installed the newer version.
iMon updated automatically (I set the updates on) to the newest version.
Open iMon...
I have the remote working completely. There was nothing special to do: I updated iMon software, the first update was a...
1. Drive bays - fitting an extra 3.5" drive
The specs state 2x 3.5" and 1x 5.25" bays. From the photos ive seen of the inside of...
I just built a system using this case and I love it so far.... my old case was a Zalman HD 135, which I liked, but the Moncase with its low-profile truly looks like a high-end CE DVD player that doesn't stand out among the other HT devices on the TV stand.
I didn't use the built-in IR receiver, because I had an external MCE receiver...
I just built a system using this case and I love it so far.... my old case was a Zalman HD 135, which I liked, but the Moncase with...
So I am using the Moneual LAB Black Aluminum MonCaso 312B case for my Media Center. I thought that since I am using it, I'd give...
Im thinking of treating my Box to some silent case fans, and am unsure between the Scythe and the Noctua (both are the same price here in AU). The Scythe is rated at 2500rpm and the Noctua at 1800 but I would probably run them at less. Anyone had any experience with either model? Thoughts/ideas on which would be best (quietest, best...
Im thinking of treating my Box to some silent case fans, and am unsure between the Scythe and the Noctua (both are the same price...
Im thinking of treating my Box to some silent case fans, and am unsure between the Scythe and the Noctua (both are the same price...
I have been relatively happy with my Cooler Master CM 280 (hard to find now). I am thinking about changing the fans I have in it (or at least under-volting them). The case is not for everyone. It is tall. Tall enough to have a 120mm exhaust fan located above the motherboard (not simply the side of the case like the Antec ones, though...
I have been relatively happy with my Cooler Master CM 280 (hard to find now). I am thinking about changing the fans I have in it...
Hello
I've been following MP for a little while now, and have decided to build my first HTPC using MP. While I have the...
Well. All is good.
The VFD now works and the foil between two bits of cardboard wrapped in tape is blocking the signal from the hauppage remote so, no more double commands every key press.
Thanks to Kiwijunglist for the info that led me to solving this problem.
Cheers
Ventry
Well. All is good.
The VFD now works and the foil between two bits of cardboard wrapped in tape is blocking the signal from the...
I bought this case for my HTPC last year and am pretty happy with it. Comes with Imon Remote and VDF (digital display on the front...
I've got an S14V and the fans are near silent. In total there are 5 fans running: 2 Origenae exhaust fans, Origenae HDD fan, the power supply fan, the CPU fan on a Ninja Mini, and frankly my blu-ray drive is louder than any of them.
I've got an S14V and the fans are near silent. In total there are 5 fans running: 2 Origenae exhaust fans, Origenae HDD fan, the...
Finally ready to pull the trigger on this but have a few questions.
Does anyone have a the S14v case from OriginAE? I'm...
Thanks for all the suggestions. That GD02 is a nice looking case. In the end I went for a Silverstone LC04. It's a tiny bit smaller at 31 cm deep and only 11cm high, but it still takes a full size OD and had no trouble fitting all my components. Plus I got an amazing deal on the case and I saved more cash because the included PSU...
Thanks for all the suggestions. That GD02 is a nice looking case. In the end I went for a Silverstone LC04. It's a tiny bit...
I've been waffling on whether or not to buy a new case for my MediaPortal box. I'm going through a major rebuild right now...
I use the 7K09 in my bedroom, and while it is a bit cramped to work with, and one has to be careful about the length of the optical drive in relation to the CPU cooler, it has been a great case for me thus far.
MB: GIGABYTE GA-E7AUM-DS2H LGA 775 NVIDIA GeForce 9400 HDMI Micro ATX Intel Motherboard - Retail
RAM: A-DATA 4GB (2 x...
I use the 7K09 in my bedroom, and while it is a bit cramped to work with, and one has to be careful about the length of the optical...
Hi everbody,
I consider to buy one of the following cases to setup a new HTPC:
hec Compucase 7K09 / 7KJ9 / 7KJC
(7K Series...
with a nice case that just fits in the hole (antec micro fusion) , ikea bonde bench, there is the same problem, not a lot of room down the sides.
however, ikea bonde bench is not too expensive and if you don't mind taking the saw to it as I did... you can mount a couple of uber-quiet Yate Loon 140mm fans in the back of the bench...
with a nice case that just fits in the hole (antec micro fusion) , ikea bonde bench, there is the same problem, not a lot of room...
The bench I am going to use for my HTPC is pretty narrow, leaving only 2-3 cm left on the side with a normal htpc case, but height...
I have M2A-VM inside a Silverstone SG01 Evo - not exactly a HTPC Case...but closer than most. I had to have a case that would be < 10.75" and it fit the bill nicely. With only 3 fans (2x8cm thermal controlled,1x12cm thermal ) running, it is quite. I can not hear it from 2.5m away and only hear the fans if I am using mouse to do...
I have M2A-VM inside a Silverstone SG01 Evo - not exactly a HTPC Case...but closer than most. I had to have a case that would be <...
Hi,
I have a M2A-VM hdmi motherboard and a really crappy monster sized case. It's using most of the space under my tv so wanted...