Having trouble installing or configuring MediaPortal?
did you get it to work? I decided to try this program cause mmc takes up too many system resources, i think my encoder version is 6.12, the latest one. i keep getting an error trying to create a graph, when i hit edit in the setup>tv>capture cards. Ive gotten rid of the <--! and --> in the capturecard definitions. tried changing that...
did you get it to work? I decided to try this program cause mmc takes up too many system resources, i think my encoder version is...
MediaPortal Version: 0.2.2
MediaPortal Skin: Simplify
Windows Version: XP SP2
CPU Type: AMD Athlon XP 2500+
HDD: Plenty...
Thanks marcus
I was looking on the australian media centre site and read about that but did not know was realtek
I will try now - thanks again - will let you know as i have to wait till family stops watching a show on TV
I found my problem, I blamed everything about RC2 and it was the flap on the spdif connector had broken away...
Thanks marcus
I was looking on the australian media centre site and read about that but did not know was realtek
I will try...
TV-Server Version:
MediaPortal Version: 2.3.0 RC2
MediaPortal Skin: Aqua
Windows Version: XP PRO SP 2
CPU Type: P4D 2.8
HDD...
Thanks, I'll have to give it a shot.
Thanks, I'll have to give it a shot.
Hi all,
I've been using MP 0.2.2.0 for a while now to watch films etc but recently dug out an old V-Stream X-pert DTV DVB-T PCI...
MediaPortal Version: V0.2.3.0 RC2
Windows Version: windows xp
1. TV Card: Twinhan
I'm having trouble finding any information on how to setup motor control. Could someone point me to some instructions or something similar? I'm trying to set it up to move to the right sat when I change channels.
Thanks for you help.
MediaPortal Version: V0.2.3.0 RC2
Windows Version: windows xp
1. TV Card: Twinhan
I'm having trouble finding any information...
MediaPortal Version: V0.2.3.0 RC2
Windows Version: windows xp
1. TV Card: Twinhan
I'm having trouble finding any information...
There is no space - here's what I get in Graphedit:
Does
mean, that the Floppy DTV DVB-S2 will never work in TV Engine 2, even if I only wanted to watch DVB-S channels?
That would really be too bad, since the DVB-S got replaced by the DVB-S2.
The PC only got 512MByte Ram. The SQL Server and TV Service would eat up some more...
There is no space - here's what I get in Graphedit:
Does
mean, that the Floppy DTV DVB-S2 will never work in TV Engine 2...
I did set up a MediaPortal PC for a friend of mine who is using DVB-S for TV. I use DVB-C and am happy with the Digital Everywhere...
OK thank you i'm now downloading Media Portal
OK thank you i'm now downloading Media Portal
TV-Server Version: ??
MediaPortal Version: I don't have installed it yet.
MediaPortal Skin: No
Windows Version: Windows XP SP2...
I did not select OSDor touch ffdshow but I will have a look.
Info top left shows resolution, bit rates etc
:thx: Bingo,
Thanks FlipGer, you were right it was the OSD setting ing ffdshow
I did not select OSDor touch ffdshow but I will have a look.
Info top left shows resolution, bit rates etc
:thx: Bingo...
TV-Server Version:
MediaPortal Version: 2.3.0 RC2
MediaPortal Skin: BLUE
Windows Version: XP Pro SP 2
CPU Type: Pentium D 2.8...
No, didnt work it takes about 4 hours to dl, the stuttering seems have fixed itself - thanks again
No, didnt work it takes about 4 hours to dl, the stuttering seems have fixed itself - thanks again
TV-Server Version:
MediaPortal Version: 2.3.0.RC2
MediaPortal Skin: happens on all skins
Windows Version: XP Pro SP2
CPU...
TV-Server Version:
MediaPortal Version: 2.3 RC2+SVN
MediaPortal Skin: x-face
Windows Version: vista 32bits
CPU Type: AMD Sempron 3300+ (2GHz)
HDD: Maxtor 40+80+300Go
Memory: 1,5 Go DDR PC3200
Motherboard: Asus K8N4-E SE
Motherboard Chipset: nVidia nforce 4
Motherboard Bios:
Video Card: nVidia Geforce 7300 GS
Video Card...
TV-Server Version:
MediaPortal Version: 2.3 RC2+SVN
MediaPortal Skin: x-face
Windows Version: vista 32bits
CPU Type: AMD...
TV-Server Version:
MediaPortal Version: 2.3 RC2+SVN
MediaPortal Skin: x-face
Windows Version: vista 32bits
CPU Type: AMD...
EDIT: Thanks for the help so far Taipan. I have decided to leave MP for now, and just stick with WinTV. This may be closed.
EDIT: Thanks for the help so far Taipan. I have decided to leave MP for now, and just stick with WinTV. This may be closed.
Hi, I have this tuner and I am having some problems recording one channel while watching another. MP detects both cards, and they...
The newest version of multishortcut does work with the most current version of MediaPortal (works with the 10-13-2007 SVN for me) The newest version is here: https://sourceforge.net/tracker/index.php?func=detail&aid=1649995&group_id=169721&atid=851496
The newest version of multishortcut does work with the most current version of MediaPortal (works with the 10-13-2007 SVN for me)...
Is there any plugin or way to launch an external program like say fusion hdtv or mytheatre?....neither one of my tuner cards is...
seriously. I'm in exactly this boat, I got the 1600 so I could series record hd network shows over qam... being able to map these channels to their corresponding networks in the guide would be faboo. As far as I can tell schedules direct / xmltv doesn't have an EPG for my clear qam channels, so I need to bind them to their epg...
seriously. I'm in exactly this boat, I got the 1600 so I could series record hd network shows over qam... being able to map these...
I just finished getting Media Portal installed, I now have both my OTA and QAM channels playing back in the My TV Plugin, however...
TV-Server Version:
MediaPortal Version: 2.2 stable
MediaPortal Skin: standard
Windows Version: vista x32
CPU Type: P4 3.0 Ghz
HDD:
Memory: 1 Gb
Motherboard:
Motherboard Chipset:
Motherboard Bios:
Video Card: Geforce FX 5350
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Avermedia...
TV-Server Version:
MediaPortal Version: 2.2 stable
MediaPortal Skin: standard
Windows Version: vista x32
CPU Type: P4 3.0 Ghz...
TV-Server Version:
MediaPortal Version: 2.2 stable
MediaPortal Skin: standard
Windows Version: vista x32
CPU Type: P4 3.0 Ghz...
getting channel listing from set top box
TV-Server Version: dunno
MediaPortal Version: latest stable
MediaPortal Skin: default
Windows Version: win xp sp2 with all critical updates
CPU Type: p4 1.7 socket 478
HDD: 120 gig eide
Memory: 512mb 133
Motherboard:
Motherboard Chipset:
Motherboard Bios: dunno
Video Card: nvidia...
getting channel listing from set top box
TV-Server Version: dunno
MediaPortal Version: latest stable
MediaPortal Skin: default...
TV-Server Version: dunno
MediaPortal Version: latest stable
MediaPortal Skin: default
Windows Version: Latest Vista 32bit
CPU Type...
Hi, I have downloaded MediaPortal several times now and everytime its downloaded and completed the installation, I get the following error message box come up: "Could not write DefaultFeature to key\products\AFC918786871D4840BED015BBF2F26D5\Features. Verify that you have sufficient access to that key, or contact your support...
Hi, I have downloaded MediaPortal several times now and everytime its downloaded and completed the installation, I get the...
Hi, I have downloaded MediaPortal several times now and everytime its downloaded and completed the installation, I get the...
Hi,
I've configued the Play DVD option to use PowerDVD as an external player - however, when I put a BluRay disc in my attached Pioneer BDC202 player and hit the Play DVD option a window pops up entitled My Video with the message "Please Insert Disc"
Now I know the player works ok because it fires up PowerDVD Ultra in the...
Hi,
I've configued the Play DVD option to use PowerDVD as an external player - however, when I put a BluRay disc in my attached...
Hi,
I've configued the Play DVD option to use PowerDVD as an external player - however, when I put a BluRay disc in my attached...
hello is there a way of remaping the MY TV in Main to launch beyondTV instead. My card is not supported in MP.
Thanks Ken
hello is there a way of remaping the MY TV in Main to launch beyondTV instead. My card is not supported in MP.
Thanks Ken
hello is there a way of remaping the MY TV in Main to launch beyondTV instead. My card is not supported in MP.
Thanks Ken
Hi!
I'm looking for a way to view my videos on an 16:9 TV.
Most of them are shown in an wrong angle.
Is there a Way to let Medaportal know that it is shown on an 16:9 Screen, or anyting like that?
THX 4 your Attention ;)
Hi!
I'm looking for a way to view my videos on an 16:9 TV.
Most of them are shown in an wrong angle.
Is there a Way to let...
Hi!
I'm looking for a way to view my videos on an 16:9 TV.
Most of them are shown in an wrong angle.
Is there a Way to let...
TV-Server Version: n/a
MediaPortal Version: 0.2.3.0 RC2 SVN
MediaPortal Skin: BlueTwo wide
Windows Version: XP MCE RU2
CPU Type: Intel Pentium 4 3 GHz
HDD: Samsung 250GB
Memory: 1 GB
Motherboard: FIC P4M-915GD1-LF
Motherboard Chipset: Fujitsu Siemens
Motherboard Bios: Phoenix 6.00 PG 10 May 2006
Video Card: Nvidia GeForce...
TV-Server Version: n/a
MediaPortal Version: 0.2.3.0 RC2 SVN
MediaPortal Skin: BlueTwo wide
Windows Version: XP MCE RU2
CPU...
TV-Server Version: n/a
MediaPortal Version: 0.2.3.0 RC2 SVN
MediaPortal Skin: BlueTwo wide
Windows Version: XP MCE RU2
CPU...
I was having the same problem - thanks for the solution!
I was having the same problem - thanks for the solution!
MediaPortal Version: 0.2.3.0 RC1
MediaPortal Skin: Blue Wide
Windows Version: XP SP2
CPU Type: Athlon 64, 3200
HDD: 40
Memory: 512...
EPG of DVB stream always worked for me.
Otherwise WebEPG also good, just remember to double click what you select, saves time.
EPG of DVB stream always worked for me.
Otherwise WebEPG also good, just remember to double click what you select, saves time.
Hi, guys. My first posting
I am trying to tune my Compro Videomate 300 PCI card to my local stations, but the settings for my...
with program graphedit
with program graphedit
TV-Server Version:
MediaPortal Version: 0.2.3
MediaPortal Skin:
Windows Version:
CPU Type: Intel dual2core e6600
HDD...
Logs are automatically created and found in [drive]:\[Program files]\Team MediaPortal\MediaPortal\Logs
The mediaportal.log is the one you need (or zip 'em all).
Logs are automatically created and found in [drive]:\[Program files]\Team MediaPortal\MediaPortal\Logs
The mediaportal.log is the...
MediaPortal Version: Lastest version
MediaPortal Skin: none
Windows Version: Windows XP Media Center Edition
CPU Type: AMD...
Hi
has anyone got the TV2XML tool to work on Vista ?
Hi
has anyone got the TV2XML tool to work on Vista ?
Hi
has anyone got the TV2XML tool to work on Vista ?
I Have the same issue
I have the same Issue, I edited the file, etc. I think is reading the xml file in other location or so. I have no way to get it working..
I Have the same issue
I have the same Issue, I edited the file, etc. I think is reading the xml file in other location or so. I...
Hi now I have installed mediaportal 0.2.3 RC2 with an Items card ITV-301 PCI, whan I'm trying to configure MP for tv, add capture...
MediaPortal Version: 0.2.2
Windows Version: vista 32-bit
CPU Type: Core2 Duo T7200
Memory: 2048 MB
1. TV Card: Fujitsu Siemens XM400I
Hello,
I'm using the above equipment, but after installing mp 0.2.2, the program can't find my tuner card. It's the first time I installed mp on this pc with this card and OS. PS: It's a...
MediaPortal Version: 0.2.2
Windows Version: vista 32-bit
CPU Type: Core2 Duo T7200
Memory: 2048 MB
1. TV Card: Fujitsu Siemens...
MediaPortal Version: 0.2.2
Windows Version: vista 32-bit
CPU Type: Core2 Duo T7200
Memory: 2048 MB
1. TV Card: Fujitsu Siemens...
Hmmm
Well I am using the current snapshot and build and OTA ATSC is working, but I certainly have had some issues with it I wish I could get hammered out!
I see that a lot of people are having problems with it, so I know I am not the only one but atleast it is possible in some way (probably a couple of headaches involved in the...
Hmmm
Well I am using the current snapshot and build and OTA ATSC is working, but I certainly have had some issues with it I wish I...
TV-Server Version: tv server 3 (10/3/2007 build)
MediaPortal Version: latest (also downloaded yesterday
MediaPortal Skin: default...
goto setup, tv- channels. click on each channel and make sure that you set the correct option as how the video is received from stb. then setup irblaster to send appropriate commands to stb.
also make sure to back up the cannel configuration after you are done because when you install again, you will have to gothru each channel...
goto setup, tv- channels. click on each channel and make sure that you set the correct option as how the video is received from...
Ok, so I have installed MP and everything is great but I have a few question that have left my simple mind stumped.
What I can...
Log file
Could the "connect FAILED" entry indicate the problem with sound ? Full logs attached.
Thanks.
2007-10-05 11:29:36.093750 [Info.][6]: FixCrossbarRouting: use tuner:True use cvbs#1:False use cvbs#2:False use svhs:False use rgb:False
2007-10-05 11:29:36.093750 [Info.][6]: Find crossbar:#1
2007-10-05 11:29:36.093750...
Log file
Could the "connect FAILED" entry indicate the problem with sound ? Full logs attached.
Thanks.
2007-10-05...
Area: Media Portal Program
MediaPortal Version: 0.2.3.0-SVN-03.10.2007- 0:58:50,48-Build 16098
(2007-10-03)
MediaPortal...
I would like to know myself. I've used MP in the past with Cable, but when trying to setup MP TV signals with my Dish Network STB there is no option for Satellite, just Cable and Antenna. How am I supposed to go about setting up my WinTV=PVR-500 to recieve the channels that my DishPro 301 STB is sending him. I am connected to my...
I would like to know myself. I've used MP in the past with Cable, but when trying to setup MP TV signals with my Dish Network STB...
TV-Server Version: 3-04-11-2007-01-22h--rev 13983
MediaPortal Version: 0.2.2
MediaPortal Skin:
Windows Version: Windows Server...