Is there a way to configure the IR blaster behavior?
Here's the use-case. I have scheduled a show to record. I fire up MP to watch the show that is currently recording. When I pull up the list of current streams so that I can tune in to the stream that the scheduler is using, and select it, the IR blaster sends that channel to my...
Is there a way to configure the IR blaster behavior?
Here's the use-case. I have scheduled a show to record. I fire up MP to...
Is there a way to configure the IR blaster behavior?
Here's the use-case. I have scheduled a show to record. I fire up MP to...
The Wiki has many answers;
Video Folders - MediaPortal Wiki
Welcome to the world of MP.
The Wiki has many answers;
Video Folders - MediaPortal Wiki
Welcome to the world of MP.
Hi, Guys
First post ;)
I have just installed media portal looks like a great piece of software, but i have 1 major issue with...
Re: AW: Migrated from Sagetv to MP 1.2RC - a few questions
Hi Owilsky,
I'm looking for this exact kind of tool. I just barely cut over to MediaPortal today from SageTV, but need to import my previously recorded shows. Would you like me to beta-test this?
:thx:
Re: AW: Migrated from Sagetv to MP 1.2RC - a few questions
Hi Owilsky,
I'm looking for this exact kind of tool. I just...
Hey guys,
I figured I would give MP 1.2RC a try, so I imaged my server/frontend and installed the RC...
I have a few questions...
I am no longer using using IRSS. With the SHEF plugin I don't need it.
I am no longer using using IRSS. With the SHEF plugin I don't need it.
I am a SageTV refugee looking for a replacement. I am trying to setup a sample to decide if MP is for me. The first step is...
I've installed divx and changed the LATM ACC audio decoder in the configuration. It works fine here.
Both audio and channelswitching works (without the channelswitching patch).
Maybe you need to upgrade your divX?
Just upgraded my CCCP to the newest and used it's LAV decoder for LATM ACC. This works fine as vel.
CCCP - Combined...
I've installed divx and changed the LATM ACC audio decoder in the configuration. It works fine here.
Both audio and...
Hi
Anyone in Denmark who has managed to watch TV2 using MP today?
I had it working yesterday, with CI-Module and...
Hi bc0508,
I do not have WMC to test but this may work.
Unzip and copy the .Xml, .ico and .ink to you MP directory then run the InstallMP.bat
Not sure on you file paths so the install and xml may need to be edited to suit you paths.
Good Luck
Sa
Hi bc0508,
I do not have WMC to test but this may work.
Unzip and copy the .Xml, .ico and .ink to you MP directory then run...
Does anyone know of a way to put the mediaportal launch icon in WMC. I found the attached file for boxee it will add it to the...
I got this trackball remote working with MP v1.2 in Windows 7. I am happy to tell how, if anyone is interested.
I got this trackball remote working with MP v1.2 in Windows 7. I am happy to tell how, if anyone is interested.
I bought this item
X-Gene 2.4GHz Wireless MCE Remote Control 01034 Optical Trackball 8 Channel 800 DPI-Best Computer Online...
Hello
Same question was asked -->here<-- only a few days ago. Please check my comment in that thread. Anysee is not currently supported.
mm
Hello
Same question was asked -->here<-- only a few days ago. Please check my comment in that thread. Anysee is not currently...
Hey Here
My question here is, how do i get boxer signal into my HTPC ( scrambled) so i can record tv-programs like TV2 Kanal 4 &...
Thank you for your quick reply mm. I tried to use the video section with the plugins loaded as normal and I got the same error. I ran option 1 of the debugging mode with plugins deactivated, and used the video section, I could hear the sound of the film but not see the video, the video then pooped up after which I got some random...
Thank you for your quick reply mm. I tried to use the video section with the plugins loaded as normal and I got the same error. I...
I am a new user, so very weak on technicals. I installed MP 1.2.2 along with moving pictures and MPTV Series. TV channels are fine...
Hi and welcome DIGGER_NZ :)
Processor speed has very little effect on channel change times. The things that do have an effect are:
- timeshift HDD speed
- tuner hardware (demodulator and tuner chips primarily)
- tuner driver
- the on screen display settings in the "on-screen display" subsection under "GUI" in MP configuration (note...
Hi and welcome DIGGER_NZ :)
Processor speed has very little effect on channel change times. The things that do have an effect are...
Hi All,
I've just rebuilt a new MP box. I threw a WinTV HVR 1300 in and all working good. One thing I have noticed, channel...
Hi again
I use MySQL Workbench.
First, you must log in as root and create the schema in the "SQL Development" section (see create_schema1.png and create_schema2.png). Use right click to bring up the "create schema..." option.
Then you can use the "Server Administration" section to create a user for the schema (see...
Hi again
I use MySQL Workbench.
First, you must log in as root and create the schema in the "SQL Development" section (see...
hi
how must definision my DVBCARD for this version?how must add a site lookelike hotbird and scat it?
i,m instal this player and...
Firstly does the receiver plug into a usb port or is something else involved.
Most remotes will do basic functions as hid device, left\right up\down select\enter, so that would be my first choice to try.
ps. selecting any remote option in MP will not break anything, so you could try the allowable options.
Firstly does the receiver plug into a usb port or is something else involved.
Most remotes will do basic functions as hid device...
Hi, pardon my ignorance, but I saw this programme used on a friends computer and tv and I'm pretty sure she used a remote control...
I doesnt help, it actually makes the sound off sync.
Why could i not run off amd hdmi output?
but, mm1352000, i will try to put some LAV codecs and uninstall what i have. Haali has just been reliable for me at the moment
I doesnt help, it actually makes the sound off sync.
Why could i not run off amd hdmi output?
but, mm1352000, i will try to put...
hey guys i have been using mediaportal for awhile and decided to update to the new 1.2.
I decided to reinstall windows onto a...
Hi mm
To my knowledge a tuner card, can record more than one channel at the same time as long as the channels are places in the same MUX. So if I want to schedule more than one recording (and be sure they are recorded) I expect that I have to make sure that both channels are places in the same MUX.
Of course I could setup the...
Hi mm
To my knowledge a tuner card, can record more than one channel at the same time as long as the channels are places in the...
Hi
In the TV-guide I don't see any information about what MUX a channel belongs to, making it rather difficult to schedule...
Thanks for the ideas! :thx:
Thanks for the ideas! :thx:
Hey there!
I ran a search for this but didn't turn up anything. Is there a plugin or hopefully some default setting / file that...
Your most welcome.
Your most welcome.
Hello all! How do I get Media Portal to scan for channels on my Win TV HVR-1250 tuner card?
Hi and welcome smoleson :)
For the same channel it should only require one tuner for as many clients as you like - they share.
mm
Hi and welcome smoleson :)
For the same channel it should only require one tuner for as many clients as you like - they share.
mm
for two clients to watch the same channel, does that require two tuners or will they share the same?
TIA
Søren
Hi again
Yep, different devices can share a single tuner - same rule applies.
mm
Hi again
Yep, different devices can share a single tuner - same rule applies.
mm
Hi all
Ive been looking at mediaportal and really like its design but im trying to find certain info that is probably answered...
Well I have figured out why I am having so much trouble charter is now using SDV they gave me a TA to use but I dont see anyway to get it to work with the wintv-hvr-2250 so I guess I am going to have to go to hdhomerun prime.
Well I have figured out why I am having so much trouble charter is now using SDV they gave me a TA to use but I dont see anyway to...
I am trying to add all my channels off my tuner and use the schedules direct plug in. I have some channels that schedules direct...
Thanks niels37, now I just disable my optical output when I want to use my computer speakers.
Thanks niels37, now I just disable my optical output when I want to use my computer speakers.
I would appreciate some suggestions for a new PCI sound card. Some of the requirement are, it needs to have a In and Out optical...
i know dreambox can do that
i know dreambox can do that
Hello,
i'd like to schedule option channels. in german you call it "options kanal" oder "unter kanal". ill describe if thats not...
Hi
No option to disable it.
Only the choice between small and fullscreen but since you are running window, not applicable.
Hi
No option to disable it.
Only the choice between small and fullscreen but since you are running window, not applicable.
I'm using MediaPortal 1.2.2. in non-fullscreen mode.
Is there a way you can make the splashscreen invisible when you start...
Please could someone help me?
I am currently experiencing difficulty acquiring subtitles for the subcentral plugin. The plugin itself is great and works fine. The issue I am having is that I only seem to be able to locate subtitles for the whole film. For example, even when the people are speaking english I receive subtitles. Is...
Please could someone help me?
I am currently experiencing difficulty acquiring subtitles for the subcentral plugin. The plugin...
Please could someone help me?
I am currently experiencing difficulty acquiring subtitles for the subcentral plugin. The plugin...
Hi and welcome imnee :)
You should be able to set explicit mappings for each channel on the "TV Mappings" tab in WebEPG configuration. Perhaps you're more unsure how to map the channels because the names are unknown? Well, if that is the case, go to the "TV Channels" section of TV Server configuration. All the channels with red icons...
Hi and welcome imnee :)
You should be able to set explicit mappings for each channel on the "TV Mappings" tab in WebEPG...
When I scan for channels MP only finds channel ID and display name for 1 channel. All the rest show up as Unknown and display a...
http://reviews.cnet.com/i/tim/2011/06/03/IMG_8606_610x458.JPG
http://i.i.com.com/cnwk.1d/i/tim/2011/06/01/Sony_BDP-S580_user_interface_038_e.jpg
How to get movies and TV shows from Amazon Instant Video - TiVo
[RELEASE] Amazon Prime Instant Video plug-in addon - XBMC Community Forum
http://linuxblog.avserver.info:8000/?p=510...
http://reviews.cnet.com/i/tim/2011/06/03/IMG_8606_610x458.JPG...
Is there a plugin that can access videos for Amazon on demand?
My blu ray player has a cool little interface, but I was not sure...
yeah i found this and it helped..
Muxing an m2ts to mkv using tsMuxer and mvkmerge - YouTube
i'm converting some HD samples to mkv..
i use MakeMKV for full movies..
yeah i found this and it helped..
Muxing an m2ts to mkv using tsMuxer and mvkmerge - YouTube
i'm converting some HD samples...
Here is a great easy to follow guide on converting .m2ts to .mkv....
Conversiuon only guide
Compression guide
:thx:
Thanks, and no I hadn't...very interesting! Reading through it now :D
Thanks, and no I hadn't...very interesting! Reading through it now :D
New user of mediaportal (though I had quickly looked at it before) and I must say it is excellent and should have used it first...
Nope I have it installed on 3 W7 computers, I have never come across trouble installing or even the issue you are having.
not sure I can help because all I do is click install.
:sorry:
Nope I have it installed on 3 W7 computers, I have never come across trouble installing or even the issue you are having.
not sure...
I'm a WMC and XBMC user, and every now and again I like to check out the alternatives - I'm probably not gonna stick with...
Hi there :)
Welcome, you will have lots of fun partaking in this addiction.
Hi there :)
Welcome, you will have lots of fun partaking in this addiction.
Hello everyone,
I found the other feedback thread helpful as I knew what to expect and just installed in the most logical way I...
Blimey 1.0.1 - that is an old version, I would definitely update!!!
Just to echo what rekenaar said, it will definitely take a bit of work to do the fresh install and most importantly - none of your existing plugins will work anymore.
I suggest you write down all of the plugins that you have installed (and actually use) and...
Blimey 1.0.1 - that is an old version, I would definitely update!!!
Just to echo what rekenaar said, it will definitely take a bit...
I am running version 1.0.1.0 and am wondering if updating to a newer version will cause me to have to update the cover art or any...
