Yes, and have the ability to watch the ones you have on your computer.
The UI is slick, so that is why I'd want to watch them via MP rather then search through imdb.com or otherwise.
Yes, and have the ability to watch the ones you have on your computer.
The UI is slick, so that is why I'd want to watch them via...
My preliminary analysis of MediaPortal gives me the impression that the software can only show me meta data relating to movies/Tv...
Hi,
Please fill out your system specs and post your logs. Without these it would only be guessing.
//W (who personally knows nothing about ATSC)
Hi,
Please fill out your system specs and post your logs. Without these it would only be guessing.
//W (who personally knows...
Hi guys,
After a few days of messing around with config stuff, reading setup guides, and lots of forum posts, I managed to get MP...
hfcrussel you didn't understand the problem.
YES! MP starts on the 2nd monitor (TV) but when I switch the TV off and then turn it on - MP window moves to the the 1st monitor.
So I will install Windows XP..
hfcrussel you didn't understand the problem.
YES! MP starts on the 2nd monitor (TV) but when I switch the TV off and then turn...
I have a monitor and TV connected to my PC (ASRock H55M + Intel® Core™ i3-530 Processor (4M Cache, 2.93 GHz) with good Integrated...
Fremake video converter is the best one i have used, uses cuda if you have nvidia graphics as well, video can be edited inside the program to cut out adverts, and will then do batch encodes to iso, or single to burn dvd.
Fremake video converter is the best one i have used, uses cuda if you have nvidia graphics as well, video can be edited inside the...
Greetings!
I'm building up my third HTPC and it sounded like MP was just the ticket for what I wanted to do. Prior machines used...
Still trying to get to grips with the setup (despite having read and reread the wiki) and am having the following problems:
- I'm using a diseqc 4x1-switch (with 2 LNBs attached) with a Compro Videomate card and no matter what scan settings I use, I can only seemingly pick up channels from the first LNB (not an issue with Compro's...
Still trying to get to grips with the setup (despite having read and reread the wiki) and am having the following problems:
- I'm...
Still trying to get to grips with the setup (despite having read and reread the wiki) and am having the following problems:
- I'm...
Ok, everything on the computer.
Really thank you everyone, you are very fast to answer it's impressive
Thank you again. I'll come back post some picture,video when everything will be build
Ok, everything on the computer.
Really thank you everyone, you are very fast to answer it's impressive
Thank you again. I'll...
Hi everybody,
I will move soon with my parents in a new house, and they said OK to built a htpc.
I can do what I want !! =P...
I've just begun to use Mediaportal today (having had one too many problems with ComproDTV, which I've used for some years) and am trying to configure WebEPG >> I've tried importing "My Channels" (5 of them) which I've mapped, but when I proceed to "Grab Now" it seems intent on downloading listing for every available channel rather...
I've just begun to use Mediaportal today (having had one too many problems with ComproDTV, which I've used for some years) and am...
I've just begun to use Mediaportal today (having had one too many problems with ComproDTV, which I've used for some years) and am...
I am putting together an HTPC and obviously plan to install MP.
I've been reading quite a bit on these forums about the many hardware configurations and options available but unfortunately I am still a bit confused on what I anticipate is a simple Directv (satellite) config.
Here are the basic questions.
Do I need to have two...
I am putting together an HTPC and obviously plan to install MP.
I've been reading quite a bit on these forums about the many...
I am putting together an HTPC and obviously plan to install MP.
I've been reading quite a bit on these forums about the many...
great timing. I told her i got it changed for her.
great timing. I told her i got it changed for her.
I was just wrinting a reply to someone on another forum regarding rules for what constitutes a duplicate recording for a tv...
I've got the Hauppauge Colossus card on my Windows 7 computer, taking from a DirecTV set-top box.
Months ago, I had set up blastcfg.exe successfully to blast MediaPortal channel changes to the set-top box via Hauppauge's IR blaster. Everything worked well--until yesterday.
Until yesterday.
Yesterday, I tried to watch TV programs...
I've got the Hauppauge Colossus card on my Windows 7 computer, taking from a DirecTV set-top box.
Months ago, I had set up...
I've got the Hauppauge Colossus card on my Windows 7 computer, taking from a DirecTV set-top box.
Months ago, I had set up...
You have to enable "Expert mode" in the MP configuration to see all plugins (including PS++).
Michael
You have to enable "Expert mode" in the MP configuration to see all plugins (including PS++).
Michael
Hi,
I am a new user and initially I am trying to keep things simple with no plugins and using the basic skin whilst I become...
Hi,
The most popular codecs seem to be the Win7 DVD-Codec and a codec pack known as SAF 6 (see here for SAF 6 - you will need to PM Hoborg to unlock it)
If you use the SAF6 PDVD11 codecs you should ensure you have allowed the codec to use the GPU - see the codec settings in MP Config. The Win7 codecs don't seem to need any...
Hi,
The most popular codecs seem to be the Win7 DVD-Codec and a codec pack known as SAF 6 (see here for SAF 6 - you will need to...
Hi All
...am new to the whole 'satellite' thing, and have installed a TBS6922 card that is recognised in MediaPortal.
Know the...
i did. still no change unfortunately. :(
i did. still no change unfortunately. :(
Hello everyone. I'm not entirely sure if I'm in the right place to be asking this question. I'm new to the forum and a completely...
Hi again Rob i tried intelliremote but unfortunately its not picking up commands from my remote at all even though it correctly identifies my receiver in hid device tester although wont register button presses in the info pane.
Hi again Rob i tried intelliremote but unfortunately its not picking up commands from my remote at all even though it correctly...
I purchased a Dell HTPC the other day and set about getting things working. I soon found out that the Remote had limited...
Hello,
I think that we're all aware that if one drops a movie into a folder, and then a bitmap having the same filename as the movie, mediaportal will happily display this as cover art as you browse your movie folder. While looking in my TV recordings folder one day, it occurred to me that the xml files in there were responsible...
Hello,
I think that we're all aware that if one drops a movie into a folder, and then a bitmap having the same filename as the...
Hello,
I think that we're all aware that if one drops a movie into a folder, and then a bitmap having the same filename as the...
Thanks for replies, checking out online videos, they may have this facility in their next release.
Thanks
Ram
Thanks for replies, checking out online videos, they may have this facility in their next release.
Thanks
Ram
Hello,
I watch creativelive.com all the time they are on but usually on my laptop as I cannot figure out how to stream it...
Is there a way when streaming an episode that requires a menu selection through IPIMP to select the episode start from the menu. Currently strem only plays menu.
Thanks in advance.
Is there a way when streaming an episode that requires a menu selection through IPIMP to select the episode start from the menu...
Is there a way when streaming an episode that requires a menu selection through IPIMP to select the episode start from the menu...
Try going into the TV server configuration and click the + by plugins then select Xmltv then click the Import button to force a new EPG import.
Try going into the TV server configuration and click the + by plugins then select Xmltv then click the Import button to force a new...
I just installed Media Portal on my new Windows 7 computer. I had been using it successfully on an XP machine. But here after I...
I'd be curious how one can do the schedule thingie as well..
I'd be curious how one can do the schedule thingie as well..
Hi All, I just install this amazing software and one thing usefull is to be able to schedule a playlist to play at exemple 8AM and...
oops, me too :ooops:
oops, me too :ooops:
hi :) how do you name the Ghost whisperer series so they can be read ? se1e1 and so on?
Please attach logfiles.
See: How to gather log files - MediaPortal Manual Documentation for instructions.
--- PLEASE DO NOT COMMENT THIS MESSAGE ---
Logs and system specs should always be added - just in case
Please attach logfiles.
See: How to gather log files - MediaPortal Manual Documentation for instructions.
--- PLEASE DO NOT...
im having problems playing a film. watching the film thru media portal using lav filter the audio jumps. but when i burnrd it to...
Try it with a disabled FW to rule that out. I think you need to open up a larger range of ports as the ports will differ.
Try it with a disabled FW to rule that out. I think you need to open up a larger range of ports as the ports will differ.
Hello Everyone
So happy to find a replacement for Windows Media Center which I loathe.
Installation went fairly well but I have...
Have a look at this post: https://forum.team-mediaportal.com/television-mytv-frontend-tv-server-90/terratec-cinergy-htc-usb-xs-hd-41874/index8.html#post639902
There it says this should work using girder or alike software...
Have a look at this post...
Is there anyone, who managed to configure the Terratec Remote so it can be used with Mediaportal?
The remote comes with the...
Hi all
I am based in South Africa and have a set top box issue...i think.
I located this forum and hoped it would solve my problem. Unfortunately it has not. I have had an HTPC, running Media Center, for about a year now. I have a Hauppauge 1200 PCI TV card with an RCA input connector which i plug from my DSTV STB decoder. I also...
Hi all
I am based in South Africa and have a set top box issue...i think.
I located this forum and hoped it would solve my...
Howdy,
First time setting up Mediaportal, looks like a very cool application but I can't get any channels to display from my STB...
Thanks for your help. Where in MP settings do i enable dxva.Also i'm running my sound to my amp. What is the best sound settings for that. (in video)
Thanks Thanks Thanks Again:)
Thanks for your help. Where in MP settings do i enable dxva.Also i'm running my sound to my amp. What is the best sound settings...
I just installed PowerDVD in my computer. I just have one question. Is it a good idea to use this as my main media player thruogh...
Appreciate the reply (again)
:)
Could someone please give me a steer in respect of best Db (i.e. M$SQL or MySQL)?
Thanks In advance!
:)
Appreciate the reply (again)
:)
Could someone please give me a steer in respect of best Db (i.e. M$SQL or MySQL)?
Thanks In...
Hi everyone,
Following a re-vitalised effort to nail the spectre of a "proper" htpc replacement for the Sky+ subscription (now...
I dont have the tv server setup and I have some .wtv files that I have imported in to my tv series. I have the check mark to skip commericals with comskip data.
How can i get the comskip data for MP client to use.
I dont have the tv server setup and I have some .wtv files that I have imported in to my tv series. I have the check mark to skip...
I dont have the tv server setup and I have some .wtv files that I have imported in to my tv series. I have the check mark to skip...
Ah yes makes sense - is the not-skipping from recorded TV not solved yet in 1.2.2 seems like that's been around a long time now - still not a biggie. I'll give it another go and see how it works then if your having success with it - I'll do the same and remove post processing from BBC programmes.
Ah yes makes sense - is the not-skipping from recorded TV not solved yet in 1.2.2 seems like that's been around a long time now -...
Hi
A question for UK users familiar with the set of features associated with Sky+ or Freeview+.......
I'm currently using a...
I jst had a similar problem with my Win 7 box. Based on this link: Diagnosing basic problems with DirectX, I downloaded Windows DirectX End-User Runtime Web Installer from Microsoft from here: Download: DirectX End-User Runtime - Microsoft Download Center - Download Details. Took care of the problem.
This from a total newby, but...
I jst had a similar problem with my Win 7 box. Based on this link: Diagnosing basic problems with DirectX, I downloaded Windows...
I have an Acer RL100 running windows 7.
Direct 9x will not install so stopping me getting MP on the system.
I tried installing...
Great reading - quite informative.
Keep it coming :)
Great reading - quite informative.
Keep it coming :)
(!) This is under construction. I will add more content with time @Mods if you find this post inappropriate or at wrong place plz...