I'm running MP vet 1.0RC2 along with IR Server Suite to change the channels on my STB. All is working well except that when I'm trying to change the channels on my STB it does not work. If I check the config in IR Server Suite everything works anfd I can change channels via the test button.
Help
I'm running MP vet 1.0RC2 along with IR Server Suite to change the channels on my STB. All is working well except that when I'm...
I'm running MP vet 1.0RC2 along with IR Server Suite to change the channels on my STB. All is working well except that when I'm...
Hi Justin
Have you got any other software that could be affecting remote besides the standard ehome receiver, something like irserversuite, also check in MP config\remotes\hid is not enabled.
Regards
Hi Justin
Have you got any other software that could be affecting remote besides the standard ehome receiver, something like...
Hi folks,
I recently reformatted my HTPC, reinstalled XP, installed MP 1.0 RC2, and my MCE remote is acting funny. When I press...
Hi
I am using a harmony one and I cannot find a decent key to assign to two important actions.
The key to jump to the startup screen (H) (green button on MCE?)
and the (Esc) to terminate an action and jump to the previous schreen/level
To what remote key's did you assign them?
I thought of using the top up down key's...
Hi
I am using a harmony one and I cannot find a decent key to assign to two important actions.
The key to jump to the startup...
Hi
I am using a harmony one and I cannot find a decent key to assign to two important actions.
The key to jump to the startup...
Hi MoPhat,
Thanks I am going to try these.
I was surprised to find these key's where not implemented in MP by default.
Now I might program my harmony one and use it better with MP
:thx:
Hi MoPhat,
Thanks I am going to try these.
I was surprised to find these key's where not implemented in MP by default.
Now I...
Hi Is there a keystroke/command lis available which describes all keys and commands to navigaten and operate MP?
E.G.
I want to...
Thank you Cheetah05!
I had the same problem on my dell m1330 (and an encyclopedic ignorance about MP) and this solved my problem.
Not sure of this (I was changing many things) but I had to disable (untick in MP config) all the remotes to make it works.
Regards
Thank you Cheetah05!
I had the same problem on my dell m1330 (and an encyclopedic ignorance about MP) and this solved my...
Hi, i got yesterday my new dell xps notebook :D, which has a express card remote control inside.
the back key is "back space"...
yes, because its a program that keeps running in your taskmanager,
so when you resume, your remote will work on the window thats active at that moment.
Srry for bad english ;)
yes, because its a program that keeps running in your taskmanager,
so when you resume, your remote will work on the window thats...
Hello, Im trying to get MP to work with the Compro MCE remote included with my T500F, the IR Receiver connects to the back of the...
Thanks man.
helped no end : )
Thanks man.
helped no end : )
My query relates to this post about SL6399 remotes. I've posted to that thread but had no response for 4 days hence this post. I...
Under Start->Programs->INtelliremote->HID Tester
Run that application and press the buttons on your remote and see what the raw output is. If you see the MCE IR receiver light up but nothing happens in Intelliremote then the IR signal you sent is not being mapped into a HID command. Run that application to diagnose.
The MCE...
Under Start->Programs->INtelliremote->HID Tester
Run that application and press the buttons on your remote and see what the raw...
I would like to thank and-81 for helping me figure out the MCE remote and make it completely customizable using all flavors of the...
I don't believe so.
Generally the IR ports on laptops are meant for low bandwidth data transfer and are not the same as remote control IR signals.
Some do let you use both though. My old HP laptop came with an IR remote for contolling media players etc, never used it with MP though. (integrated graphics are not up to it).
I...
I don't believe so.
Generally the IR ports on laptops are meant for low bandwidth data transfer and are not the same as remote...
Hello,
Is it possible to utilize laptop's infrared receiver as receiver for my remote control and make MP learn from it...
What I understand:
-the soundgraph imon driver turns remote commands into keyboard commands and sends them to Vista
-this circumvents the Media Portal remote mapping in configuration.exe
What's wrong:
-remote actions like up, down, left, right are "double tapping" in media portal. hell, the keyboard's doing the same thing...
What I understand:
-the soundgraph imon driver turns remote commands into keyboard commands and sends them to Vista
-this...
What I understand:
-the soundgraph imon driver turns remote commands into keyboard commands and sends them to Vista
-this...
Gents I could use your help
I solved most of th eissues with RC2, the remote now works as I was missing the xml file.
But not all of the buttons work. I see no errors in the log, but still the up down and sideways buttons are not working.
any thoughts
Gents I could use your help
I solved most of th eissues with RC2, the remote now works as I was missing the xml file.
But not all...
Running:
Vista 64
TV engine 3 04-10-07 Rev16108
MP 0.2.3.0 RC3
MS MCE Remote
MPtray
I can launch MP with the green button...
Hi everyone.
I just re installed windows vista without windows media center, because i am now in love with MP.
Windows can no longer install my ehome ir transceiver.
I have no clue on the specefic model of the transceiver, but it is SMK, i hope there are some standar drivers for theese?
The remote is a Hauppauge
This is...
Hi everyone.
I just re installed windows vista without windows media center, because i am now in love with MP.
Windows can no...
Hi everyone.
I just re installed windows vista without windows media center, because i am now in love with MP.
Windows can no...
The above solution will work excellent for MediaPortal.
If for some reason you want to control other applications with your DVICO remote , I just added support for DVICO remotes in Intelliremote and there is a dvico.xml profile included which maps all the buttons of the DVICO remote. You would then just need to changed the keys...
The above solution will work excellent for MediaPortal.
If for some reason you want to control other applications with your...
Does anyone have the DVICO dual digital 4 remote working well with media portal?
I cant seem to get it working, except for some...
i am lookiing to get a new remote
need to buy an ir receiver, but buying a mce remote just for the ir sucks.
any good ones on ebay that work? anything specific i need or will any usb ir receiver work well for me?
PC Media Center Remote Control USB IR Receiver - (eBay.ca item 270251280928 end time 07-Jul-08 18:12:25 EDT)...
i am lookiing to get a new remote
need to buy an ir receiver, but buying a mce remote just for the ir sucks.
any good ones on...
i am lookiing to get a new remote
need to buy an ir receiver, but buying a mce remote just for the ir sucks.
any good ones on...
I searched through the forums but to no avail...
Using a MS MCE remote.
When viewing items in My Music for instance, I can hold down the "UP/Down" buttons and it will scroll through the list, however if I hold down the "Page UP/Down", it doesn't scroll. I have to repeatedly press the button to go through the list, and this gets...
I searched through the forums but to no avail...
Using a MS MCE remote.
When viewing items in My Music for instance, I can...
I searched through the forums but to no avail...
Using a MS MCE remote.
When viewing items in My Music for instance, I can...
allan81
You would need something like Aaron's IRServerSuite which will run a macro containing those commands, setting up macro's not my forte, sorry, but better posting on that part of forum or google simple macro's, which is what i would do in your position.
allan81
You would need something like Aaron's IRServerSuite which will run a macro containing those commands, setting up macro's...
Ok, I spent a couple of days searching and I cannot seem to find any remote documentation at all.
I've got a Firefly remote.
I've...
I plugged in the Hauppage! remote that they gave me for use with the Wintv pvr 150 and it works fine-I never have any problems with the remote driver.....
I plugged in the Hauppage! remote that they gave me for use with the Wintv pvr 150 and it works fine-I never have any problems with...
This is my first post and my first day of using the program but I want to know if the HP Mobile remote that comes with HP Pavilion...
Microsoft Update 951376
The good news for all MCE remote users, it has no effect :)
Seriously, you need to point this out to ATI, and see if there is a updated driver fix.
moved to remote tips n tricks, its liable to be around longer for people to spot.
Microsoft Update 951376
The good news for all MCE remote users, it has no effect :)
Seriously, you need to point this out to ATI...
Just letting others know in case they run into the same problem.
I came home for lunch and found my up/down scroll and...
If this is an x10 remote it should work on vista with any of the X10 software support application such as Intelliremote, Girder, IRServerSuite etc. Vista should not be a problem at all as long as you have the latest x10net.dll installed on your machine.
If this is an x10 remote it should work on vista with any of the X10 software support application such as Intelliremote, Girder...
Hello,
I use MP now already quite a while. But now i changed my hardware to view HD and for this i upgraded from XP MCE to Vista...
I have a non-genuine MCE remote and about the only buttons that work are up/down/left/right/OK. I still need to use the keyboard to navigate out of fullscreen video as the remote doesn't generate an ESC on any buttons (it generates a backspace when the Back button is pressed).
So I have a couple of questions :
1 - Is EventGhost...
I have a non-genuine MCE remote and about the only buttons that work are up/down/left/right/OK. I still need to use the keyboard...
Hi,
Can someone point me in the direction of a guide to setting up my MCE Remote for MediaPortal?
I just bought the remote...
I tried to search for a plugin or something that will force MediaPortal to ignore remote control actions while playing a movie/video in an external application (like MPC HC) but with no success.
I use MPC Home Cinema for playing all of my videos/movies. I have it set as an external player for MediaPortal. The reason for this is...
I tried to search for a plugin or something that will force MediaPortal to ignore remote control actions while playing a...
I tried to search for a plugin or something that will force MediaPortal to ignore remote control actions while playing a...
i want to know does anyone have the same problem ?
for example, " when i try to press channel 23 , MP goes different number like channel 25 or even channel 30?"
how do i fix this problem?
i am using MP1 + latest SVN and latest svn for TV Server. i am using Hauppage HVR-1600.
if you want anything from me, please ask me ...
i want to know does anyone have the same problem ?
for example, " when i try to press channel 23 , MP goes different number like...
i want to know does anyone have the same problem ?
for example, " when i try to press channel 23 , MP goes different number like...
I'm going mad trying to get my sl-6399 remote to work. See post
Anyone got a keyboard.xml script all mapped because Im getting lost trying to understand the software for KeyboardInputPlugin
Thx
ALex
I'm going mad trying to get my sl-6399 remote to work. See post
Anyone got a keyboard.xml script all mapped because Im getting...
I'm going mad trying to get my sl-6399 remote to work. See post
Anyone got a keyboard.xml script all mapped because Im getting...
Yeah,
There is a guide of sorts here
https://forum.team-mediaportal.com/general-122/philips-srm-5100-microsoft-vista-4-1-remote-control-33357/index4.html
Yeah,
There is a guide of sorts here...
hi,
im searching for a remote wich can control my htpc, lcd samsung tv, amplifier, and cable tv box (octaltv)
the remote must...
i have Hauppage MCE remote from HVR-1600 MCE kit. i have RC6 MCE OEM remote. when i installed Vista Replacement Driver , i try to press MCE button. it didnot go to MP. also i installed MP tray also for it. when i installed Ehome infrared driver for Windows. it works fine. except when i try to go to exact channel like channel 23, it...
i have Hauppage MCE remote from HVR-1600 MCE kit. i have RC6 MCE OEM remote. when i installed Vista Replacement Driver , i try to...
Dear all,
This weekend I bought a Hauppauge WinTV-PVR-150 Media Center Kit (including the WinTV-PVR-150 MCE card and a MCE...
Hello!
After installing MP RC1 i have problems with my ehome-infraredreceiver which came with my srt16 from origenae
Origen AE Technology - S16T HTPC Enclosure
my remote: philips rc197 vista
my ir receiver: philips ir221 receiver (in system it is listed as "microsoft ehome-infraredtranceiver" under "hid devices")
os: microsoft...
Hello!
After installing MP RC1 i have problems with my ehome-infraredreceiver which came with my srt16 from origenae
Origen AE...
Hello!
After installing MP RC1 i have problems with my ehome-infraredreceiver which came with my srt16 from origenae
Origen AE...
Hi everyone,
well actually I now have it working, by following this thread:
https://forum.team-mediaportal.com/support-123/antec-fusion-v2-ir-how-use-w-mediaportal-28783/
I'm not 100% sure, which part of my 'hacking' from that thead solved the issue - but it now works as I expected and hoped :) All is well in the world again :)
Hi everyone,
well actually I now have it working, by following this thread...
Fresh install of 1.0.0 RC1
Selected MCE remote from configuration
Only up/down/left/right and OK button working
Installed MCE...
Thanks for that.
I've now got it all working. Now if only I can get a software encoding tv card to work well.
Thanks for that.
I've now got it all working. Now if only I can get a software encoding tv card to work well.
TV-Server Version: None
MediaPortal Version: 0.2.3 RC3
MediaPortal Skin: BlueTwo
Windows Version: XP SP2
CPU Type: AMD Sempron...
This was useful to me! I turned on the DirectVobSub (autoloading version) and all is well for me (except for the subtitle being listed as Undetermined instead of the language). I only have mkvs and isos.
:thx:
This was useful to me! I turned on the DirectVobSub (autoloading version) and all is well for me (except for the subtitle being...
Hi all.I'm having a question.I try to play with a mkv file an srt subtitle but with no luck.It only shows thw subtitles empeded...
Try here:
WinLIRC Homepage
Try here:
WinLIRC Homepage
Hello,
I have an IR adapter and winlirc, I learned the remote in WinLirc but still not able to make it work with media portal...