Problems with the TV-Server or MyTV frontend? Post them in here.
which ports now really / WindowsXPSP2Firewall
Hi there!
i also got problems with my firewall (integrated WinXPSP2 FireWall)
you (that is, the Wiki) say "open udp ports 6970-6999", well my Client try's to connect on UDP far below even these Ports...?
actually i have the client Firewall down, trying to configuere the Server Firewall...
which ports now really / WindowsXPSP2Firewall
Hi there!
i also got problems with my firewall (integrated WinXPSP2 FireWall)
you...
Hi
I just can't figure out what I did wrong. Trying to set up the TV3 and the firewall but I get strange result. All works when I...
Hi,
I am trying to use TVserver latest svn build (from yesterday).
Works fine, but also problems:
If I try to use timeshifting during recording the same channel, going back or pausing for timeshifting is not possible. Timescale shows going back to the start, but film continues at actual position. Any idea?
By the way: How large...
Hi,
I am trying to use TVserver latest svn build (from yesterday).
Works fine, but also problems:
If I try to use...
Hi,
I am trying to use TVserver latest svn build (from yesterday).
Works fine, but also problems:
If I try to use...
Hi,
My TSWriter.log is getting filled up with the following errors:
04-03-2007 16:25:11 CBuffer:read available:0 size:184 readptr:184
04-03-2007 16:25:11 CBuffer:read available:0 size:184 readptr:184
04-03-2007 16:25:11 CBuffer:read available:0 size:184 readptr:184
04-03-2007 16:25:11 CBuffer:read available:0 size:184...
Hi,
My TSWriter.log is getting filled up with the following errors:
04-03-2007 16:25:11 CBuffer:read available:0 size:184...
Hi,
My TSWriter.log is getting filled up with the following errors:
04-03-2007 16:25:11 CBuffer:read available:0 size:184...
I haven't figured out exactly what the packets should be to properly support the different speeds and blasters (1,2, or both). I will post my results when I have a better idea what the packets are for the different options.
Currently, I'm trying to move the learning part of serverblaster into the plugin while adding support for...
I haven't figured out exactly what the packets should be to properly support the different speeds and blasters (1,2, or both). I...
I'm having problems getting serverblaster to work with my system. Everything seems to work except when I click the test button...
Hi,
I pickup signal from Ridge Hill, according to some webpage I found Mux D is transmitted on 666mhz from there. That frequency does appear to be in the DVBT.xml tuning frequencys listed under UK - All Regions and under Ridge Hill...
Maybe my aerial has moved or something! :S
Hi,
I pickup signal from Ridge Hill, according to some webpage I found Mux D is transmitted on 666mhz from there. That frequency...
Hi all,
I noticed a few SVN builds back that all the UK regions are now available when scanning for channels. Since around then...
10/10 to SciDoctor. If this is mentioned in the instructions on Nebula's site then I must have missed it - anyway I now get the device recognised in TV Server. Not finished yet but am getting closer...
Many thanks to both!
Martin
10/10 to SciDoctor. If this is mentioned in the instructions on Nebula's site then I must have missed it - anyway I now get the...
Hello all.
First thing I had DigiTV-HD software from Nebula running fine but then discovered Media Portal which seems absolutely...
PD, I cant more than agree with you. I have been using MP for over a year now and it is getting better and better all the time. The work on the new tv server is amazing, and the progress is great. I am sure there are many of us waiting for a non beta release. Until then the TVE2 is preforming very nicly.
For me I am totally sold...
PD, I cant more than agree with you. I have been using MP for over a year now and it is getting better and better all the time. The...
MediaPortal Version: SVN
MediaPortal Skin: B2 wide
Windows Version: MCE
CPU Type: Athlon64 3700+
HDD: Samsung SP2504C 250Gb...
Hi Guys
I'm pleased to share with you how I fixed it. I changed the Audio/Video codec under MyTV and everything works fine now. I was using InterVideo codec for both Audio and Video. Now I selected Cyberlink (MPV/MPA are ok too) and now is working
:D
Cheers
Dan
Hi Guys
I'm pleased to share with you how I fixed it. I changed the Audio/Video codec under MyTV and everything works fine now. I...
Hello,
I experiencing a live tv stuttering only for some crypted channel. If I start MP and select channel like Fox, Fox crime...
[MediaPortal Version: MediaPortal 0.2.2.0 with SVN REV 13147
TVEngine Version: Engine 0.3 REV 13147
MediaPortal Skin: Project Mayhem III
Windows Version: Microsoft Windows MCE inkl. all Patches & Servicepacks
CPU Type: AMD Athlon64 X2 4200+ AM2 2,2GHz
HDD: Samsung Spinpoint 320GB S-ATA II
Memory: 1024MB DDR2 PC800
Motherboard...
[MediaPortal Version: MediaPortal 0.2.2.0 with SVN REV 13147
TVEngine Version: Engine 0.3 REV 13147
MediaPortal Skin: Project...
[MediaPortal Version: MediaPortal 0.2.2.0 with SVN REV 13147
TVEngine Version: Engine 0.3 REV 13147
MediaPortal Skin: Project...
MediaPortal Version: TvServer
MediaPortal Skin: Blue Two Wide
Windows Version: XP Pro
CPU Type: Intel core 2 duo 2.66
HDD: 3 x 300GB Seagate SATA Type II
Memory: 2GB 667Mhz
Motherboard: Gigabyte GA-965P-DS3
Motherboard Chipset: Intel P965
Motherboard Bios:
Video Card: Asus EN7600GT
Video Card Driver: Nvida current
Sound...
MediaPortal Version: TvServer
MediaPortal Skin: Blue Two Wide
Windows Version: XP Pro
CPU Type: Intel core 2 duo 2.66
HDD: 3 x...
MediaPortal Version: TvServer
MediaPortal Skin: Blue Two Wide
Windows Version: XP Pro
CPU Type: Intel core 2 duo 2.66
HDD: 3 x...
Hi Guys, many thanks for the assistance - cleared old files and re-installed new TV server.
Great help.
Hi Guys, many thanks for the assistance - cleared old files and re-installed new TV server.
Great help.
Hi Guys,
This is my first posting so please be gentle! I have a problem where I have tried to update the TV engine / server but...
Hi
I jump in the 3d just because I was looking for the procedure to upgrade the TV Server too. AFAIK, the only way (as mentioned above) is backup the db, uninstall previous version and install new version. Usually all setting (and db) should remain unless a change in the db structure (fields or something else) are introduced. In this...
Hi
I jump in the 3d just because I was looking for the procedure to upgrade the TV Server too. AFAIK, the only way (as mentioned...
Hi Guys,
How can i do an update off the TV-Server without losing my tv channels and other settings?
When i try to install a...
MediaPortal Version: 2.2.0
MediaPortal Skin:
Windows Version: Windows XP SP2
CPU Type: AMD xp2100+
HDD:
Memory: 512
Motherboard: ASUS A7N266-VM
Motherboard Chipset:
Motherboard Bios:
Video Card: Nvidia FX 5200
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Hauppauge HVR 3000
1. TV...
MediaPortal Version: 2.2.0
MediaPortal Skin:
Windows Version: Windows XP SP2
CPU Type: AMD xp2100+
HDD:
Memory: 512...
MediaPortal Version: 2.2.0
MediaPortal Skin:
Windows Version: Windows XP SP2
CPU Type: AMD xp2100+
HDD:
Memory: 512...
Hi All
I'm using the latest build of Tvengine 3 (Rev13147) and 0.2.2.0 + SVN Rev13147
When I record a channel containing a dvb-subtitles it doesn't contain any subtitles
the same accours when I connect via VLC In VLC you can see the mediainfo about the stream and the info is not just there. Tv card is Technotrend 1500-S with...
Hi All
I'm using the latest build of Tvengine 3 (Rev13147) and 0.2.2.0 + SVN Rev13147
When I record a channel containing a...
Hi All
I'm using the latest build of Tvengine 3 (Rev13147) and 0.2.2.0 + SVN Rev13147
When I record a channel containing a...
Frodo I saw that u fixed the pre/post in todays build. Just wanted to say that it still doesn't work. (I take it that u also have the prob)
if I run a query on the sql server I get this(the pre post is set to ONE (1):
SELECT *
FROM setting
10 10 preRecordInterval 1
10 10 postRecordInterval 1
here is my logs after I...
Frodo I saw that u fixed the pre/post in todays build. Just wanted to say that it still doesn't work. (I take it that u also have...
Quick question:
I'm setting pre and post record to=2 minutes but the server seems to ignore the setting. It uses 5 min whatever...
Anyone else have any suggestions as to where I can even START to diagnose the problem?
Anyone else have any suggestions as to where I can even START to diagnose the problem?
MediaPortal Version: 0.2.2
Windows Version: XPSP2
CPU Type: Athlon64 3000+
Memory: 1Gb
Video Card: FX5200
1. TV Card: Nebula...
MediaPortal Server Version: TVengine3-02-25-2007--01-12h--Rev13090
MediaPortal Version: MediaPortal-svn--02-25-2007--01-03-Rev13090
MediaPortal Skin: N/A
Windows Version: XP Pro SP2
CPU Type: PentiumD 2.8
HDD: WD 20GB P-ATA + Seagate 500GB SATA 3.0GB/S Perpendicular drive
Memory: 512MB DDR2 533 (1-stick)
Motherboard: Intel...
MediaPortal Server Version: TVengine3-02-25-2007--01-12h--Rev13090
MediaPortal Version...
MediaPortal Server Version: TVengine3-02-25-2007--01-12h--Rev13090
MediaPortal Version...
MediaPortal Version: TVE3 server
MediaPortal Skin:
Windows Version: XPSP2
CPU Type: AMD
HDD:
Memory:
Motherboard:
Motherboard Chipset:
Motherboard Bios:
Video Card:
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: HAUPAUUGE 1300 (ANALOG+TDT)
1. TV Card Type:
1. TV Card Driver...
MediaPortal Version: TVE3 server
MediaPortal Skin:
Windows Version: XPSP2
CPU Type: AMD
HDD:
Memory:
Motherboard...
MediaPortal Version: TVE3 server
MediaPortal Skin:
Windows Version: XPSP2
CPU Type: AMD
HDD:
Memory:
Motherboard...
The latest SVN's seem to exhibit this problem, I can get an HD picture by toggling the 'TV On' option, there seems to be issues when switching between SD and HD on the same source.
You could try TVServer SVN version 13019, this is the last version I personally have no HD problems with, downside to this is the database is dropped...
The latest SVN's seem to exhibit this problem, I can get an HD picture by toggling the 'TV On' option, there seems to be issues...
Yesterday I decided to pass to tv-server, because it read that it can receive hd channels.
So following the avi guides, I...
I have the same problem, was wondering if you ever got it solved?
Peter
I have the same problem, was wondering if you ever got it solved?
Peter
MediaPortal Version: 0.2.2.0 (SVN)
Windows Version: Windows XP MCE 2005
CPU Type: Pentium D
1. TV Card: Hauppauge WinTV-HVR 1600...
I 2nd that, im watching TV when going to bed often, once getting tired I dont want to shut down X different things but just press the "off" button on my remote. (which puts PC to hibernate) MP should handle this correctly.
/OT A timer would be a nice thing to add aswell.
Regards, Muldini
I 2nd that, im watching TV when going to bed often, once getting tired I dont want to shut down X different things but just press...
The other night I decided to enter hibernation mode on my client.
I did this with the aid of the built-in "shut down" menu in...
Hi Wurzelseppi,
EPG takes time and it will be only fetched while nobody accesses the server (my experience). You should see it in the management console.
I made also the experience - if the timeout time of the EPG grapper is to less (like 1-3 min) the EPG grapper generates exceptions. So keep the times default.
Regards...
Hi Wurzelseppi,
EPG takes time and it will be only fetched while nobody accesses the server (my experience). You should see it...
Hi ,
today i finally had time to install the TVServer. I followed the instructions of the tutorials step by step and finished...
Nevermind--> it works even with the warning!
Nevermind--> it works even with the warning!
MediaPortal Version: TVengine3-02-11-2007--01-13--Rev12919
MediaPortal Skin: N/A
Windows Version: XP Pro SP2
CPU Type: PentiumD...
THANX!
Now that I can completly uninstall the old version and install the new version, I'm still having issues with scaning TV channels with Nvidia Dual TV. Do you think you could help me out?......
https://forum.team-mediaportal.com/nvidia_dual_tv_cant_find_channels-t19246.html
THANX!
Now that I can completly uninstall the old version and install the new version, I'm still having issues with scaning TV...
I uninstalled by using add/remove programs and when I tried to re install (new version) I now get an error message "the specified...
MediaPortal Version:
Windows Version: Windows XP x64 & Vista x64
1. TV Card: digitalnow Dual Hybrid PCIe S2 compatible with kworld DVB-TV PE310
1. TV Card Type: Phillips SAA7162
1. TV Card Driver: latest bda driver
ErrorLog:
25.02.2007 06:53:12 Exception :System.Runtime.InteropServices.COMException (0x80040154): Die...
MediaPortal Version:
Windows Version: Windows XP x64 & Vista x64
1. TV Card: digitalnow Dual Hybrid PCIe S2 compatible with...
MediaPortal Version:
Windows Version: Windows XP x64 & Vista x64
1. TV Card: digitalnow Dual Hybrid PCIe S2 compatible with...
- Locked
That's a thread we accepted as long as there haven't been legal issues. As there came some up (due to progress I guess, no idea) discussion on this forum has ended. As said, no support by Team MediaPortal, sorry. What some other guys do is their business, but it's not part of the official MediaPortal project.
That's a thread we accepted as long as there haven't been legal issues. As there came some up (due to progress I guess, no idea)...
MediaPortal Version: Latest SVN build
MediaPortal Skin: BlueTwo
Windows Version: Windows XP Pro SP2 (All Updates)
CPU Type...
I was running the TVServer configuration interface and for some reason the tvserver services was stoped..
Nice to head that you have it up and running!
Im going to have morning tea in bed watching TV :-)
I was running the TVServer configuration interface and for some reason the tvserver services was stoped..
Nice to head that you...
MediaPortal Version: 0.2.2.0 SVN 2-14-07
MediaPortal Skin: BlueTwo
Windows Version: Windows 2000 (SP4)
CPU Type: AMD AthlonXP...
ooooo see no evil, hear no evil, speak no evil! ;-) I don't even know what a sotcam is! but I know that it's "Something We Just don't Talk About" I'ts some kind of dirty family secrete I think!
ooooo see no evil, hear no evil, speak no evil! ;-) I don't even know what a sotcam is! but I know that it's "Something We Just...
MediaPortal Version: 0.2.2 SVN Rev12895
MediaPortal Skin: Blue 2
TVEngine3 Verion:Rev12895
Windows Version: Xp Pro SP2
CPU...
The problem is now resolved.
I installed build "tvengine3-02-23-2007--01-12h--Rev13065".
The problem is now resolved.
I installed build "tvengine3-02-23-2007--01-12h--Rev13065".
I have been using MediaPortal (without the TVServer) for a long time now and it works perfectly. I have decided to try out the...
Hello,
with the latest tve3-build the structure of the database TVLibrary changed.
How can i migrate channels and mappings from the old TVLibrary?
Thanks
Mike
Hello,
with the latest tve3-build the structure of the database TVLibrary changed.
How can i migrate channels and mappings...
Hello,
with the latest tve3-build the structure of the database TVLibrary changed.
How can i migrate channels and mappings...