Post problems you have when using MediaPortal,
or pre installation questions in here.
Re: [SOLVED] Strange problem with HDMI
Here an update on my situation.
I solved the main problem by removing igfxpers.exe and any other Intel Tools for that matter from the startup. This solved the problem when I close my TV it won't come back when I open it up again (screen saver).
The latest problem I have is now that without...
Re: [SOLVED] Strange problem with HDMI
Here an update on my situation.
I solved the main problem by removing igfxpers.exe and...
I have a strange problem with my new motherboard.
It's an Intel motherboard and I have a i3 processor on which I'm using the...
OK, I had probably misunderstood your previous post that you still had issues with the parallel installed OS.
OK, I had probably misunderstood your previous post that you still had issues with the parallel installed OS.
MediaPortal Version: 1.1.2
MediaPortal Skin: black glass
Windows Version: win7 32bit
CPU Type:
HDD: 1TB en 1.5TB
Memory: 2gig...
IFC has it's own default zoom mode which can be changed in the IFC process configuration under Advanced View Mode. This is set to stretch by default, and will decide the default zoom setting under TV Zoom in MediaPortal Configuration.
IFC has it's own default zoom mode which can be changed in the IFC process configuration under Advanced View Mode. This is set to...
MediaPortal Version: 1.1.0.0
MediaPortal Skin: Blue3wide
Windows Version: XP pro SP3
CPU Type: Intel Core 2 Duo T7300 2GHz
HDD...
Didnt know about that so will give it go. Thanks Chris!
Didnt know about that so will give it go. Thanks Chris!
Main TV Server and also run MP on multiple PC's & Laptops from the main server mainly using Netgear powerline adapters but main tv...
Hi,
I'm trying to use the RadioTime plugin (version 0.6.3.0) to play the internet radio channels from the Norwegian provider NRK (under "By Location"/"Europe"/Norway"). When doing this all the NRK channels are playing much too fast. After a few seconds the buffer is empty and the sound starts to stutter.
When playing through the...
Hi,
I'm trying to use the RadioTime plugin (version 0.6.3.0) to play the internet radio channels from the Norwegian provider NRK...
Hi,
I'm trying to use the RadioTime plugin (version 0.6.3.0) to play the internet radio channels from the Norwegian provider NRK...
I have the latest MP 1.1.2 I think and when I run it - the initial small slash notice says 1.1.0.0
Is it just that the splash logo wasn't updated? How to confirm that I really am running the latest.
I updated - my confi's say they are 1.1.2.0
I have the latest MP 1.1.2 I think and when I run it - the initial small slash notice says 1.1.0.0
Is it just that the splash...
I have the latest MP 1.1.2 I think and when I run it - the initial small slash notice says 1.1.0.0
Is it just that the splash...
MediaPortal Version: 1.1.2
MediaPortal Skin: SteamedMP
Windows Version: Windows 7 x64
CPU Type: Intel E73000
HDD: OCZ Vertex 2 60 Gb
Memory: 4 Gb DDR2
Motherboard: Asus P5Q-EM
Video Card: ATI 5670
Video Card Driver:
Sound Card: Xonar Essence STX
Sound Card AC3: no AC3
Sound Card Driver:
1. TV Card:
1. TV Card Type...
MediaPortal Version: 1.1.2
MediaPortal Skin: SteamedMP
Windows Version: Windows 7 x64
CPU Type: Intel E73000
HDD: OCZ Vertex 2...
MediaPortal Version: 1.1.2
MediaPortal Skin: SteamedMP
Windows Version: Windows 7 x64
CPU Type: Intel E73000
HDD: OCZ Vertex 2...
MediaPortal Version: 1.1.2.0
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard:
Video Card: ATI
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: 713x BDA Analog TV Tuner
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver...
MediaPortal Version: 1.1.2.0
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard:
Video Card: ATI...
MediaPortal Version: 1.1.2.0
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard:
Video Card: ATI...
I use Media Portal in multiseat configuration.
The TV server (and also the first client is in Win XP SP3 32 bits config) work ok
The second and third clients are both in Win XP SP3 32 bits config, work ok
I have recently installed a new computer (for my wife !!!) with Windows Seven Home Edition Premium 64 bits
Mp (in tvclient...
I use Media Portal in multiseat configuration.
The TV server (and also the first client is in Win XP SP3 32 bits config) work ok...
I use Media Portal in multiseat configuration.
The TV server (and also the first client is in Win XP SP3 32 bits config) work ok...
Hello ,
I have windows 7 on regular desktop with 2 monitors , media portal version 1.1.2.0
I have bought this remote control :
Silver Wireless USB PC Remote Control & Receiver : BargainCell.com - Bargain Cellular Phone Accessories
when launching media portal evry things is being ok ,I can navigate and play movies.
BUT : I...
Hello ,
I have windows 7 on regular desktop with 2 monitors , media portal version 1.1.2.0
I have bought this remote control...
Hello ,
I have windows 7 on regular desktop with 2 monitors , media portal version 1.1.2.0
I have bought this remote control...
Re: AW: Script for enable/disable Dynamic Refresh Rate
Sure, I just need to clean up the hard coded paths. I'll fix that and upload it here for you.
Re: AW: Script for enable/disable Dynamic Refresh Rate
Sure, I just need to clean up the hard coded paths. I'll fix that and...
Hi,
I have my HTPC connected to both my LCD TV and my projector and receiver). It's connected to the TV with HDMI and with VGA +...
Thank You,
Hoping to be able to use my XBOX360 as an extender, which will hopefully allow me to use Netflix, Hulu, etc etc without having a gold membership.
Thank You,
Hoping to be able to use my XBOX360 as an extender, which will hopefully allow me to use Netflix, Hulu, etc etc...
Hopefully someone can help me out.
I am wondering if Media Portal allows you to stream from your PC to the Xbox 360 for watching...
Dear all,
sometimes my usb dvb-t card works - sometimes it doesn't
- I have attached the debug report where TV wouldn't start after hibernation.
- in the XP hardware settings I can see the dvb-t card active and running
- sometimes when I boot the pc to start mp tv does not start either. Then mp hangs. After killing mp-client...
Dear all,
sometimes my usb dvb-t card works - sometimes it doesn't
- I have attached the debug report where TV wouldn't start...
Dear all,
sometimes my usb dvb-t card works - sometimes it doesn't
- I have attached the debug report where TV wouldn't start...
Good report, but posted in wrong sub forum. i will move it.
Good report, but posted in wrong sub forum. i will move it.
Hi,
It took me a while to find this, so I thought I'd share.
I had MP setup and powerscheduler working fine. PC would suspend...
Hey,
restart.vbs would be your best bet.
Or if you want to use a batch file you could use C:\Taskkill /im "Mediaportal.exe"
Sa
Hey,
restart.vbs would be your best bet.
Or if you want to use a batch file you could use C:\Taskkill /im "Mediaportal.exe"
Sa
Hi all,
Is there a command line switch for MP to shutdown the app (not the PC). I need to control starting/stopping MP via a...
MediaPortal Version: 1.1.2.0
MediaPortal Skin: Maya
Windows Version: Windows 7 Ultimate 32bit
CPU Type: Intel Pentium 4 3.0 ghz
HDD: 233gb
Memory: 3gb ram
Motherboard: Dell
Video Card: ATI raideon HD 4300/4500 series
Video Card Driver: 8.753.0.0
Sound Card: Onboard Audio
Sound Card AC3:
Sound Card Driver:
1. TV Card...
MediaPortal Version: 1.1.2.0
MediaPortal Skin: Maya
Windows Version: Windows 7 Ultimate 32bit
CPU Type: Intel Pentium 4 3.0 ghz...
MediaPortal Version: 1.1.2.0
MediaPortal Skin: Maya
Windows Version: Windows 7 Ultimate 32bit
CPU Type: Intel Pentium 4 3.0 ghz...
AW: Re: Firewall Config
^^ yes thats what I did, and yes I am running multiseat (see specs below), with the problems you mentioned, but also sometimes the "unable to start graph/stream" happend when switching channels not always directly after resume from standby.
[Edit] FYI: I also disabled IPv6 in my Router!
AW: Re: Firewall Config
^^ yes thats what I did, and yes I am running multiseat (see specs below), with the problems you...
MediaPortal Version: 1.1.2
MediaPortal Skin: Blue Three Wide
Windows Version: Server: Windows 7; Clients: Windows 7
CPU Type...
The reason you are getting this message is because you don't have an antenna connected - so no signal will be detected! :ooops:
You have connected your analogue satellite box to your 300i using a composite cable, not using the antenna. You are then scanning using the antenna module, so it will find nothing.
You have two...
The reason you are getting this message is because you don't have an antenna connected - so no signal will be detected! :ooops...
MediaPortal Version: 1.1.2
MediaPortal Skin:
Windows Version: Windows XP, SP3
CPU Type: Intel Pentium 4 640, 3200 MHz (16 x...
Excellent - many thanks for that. I knew that there must be something somewhere!
Excellent - many thanks for that. I knew that there must be something somewhere!
MediaPortal Version: 1.1.1
MediaPortal Skin: Default Blue Wide
Windows Version: 7
CPU Type: AMD Athlon(tm) 64 X2 Dual Core...
Feelin stupid...
Been there done that. Maybe. Sometime. This time I didn't even check that tab.
Well this was easy "fix",
THANK YOU
Feelin stupid...
Been there done that. Maybe. Sometime. This time I didn't even check that tab.
Well this was easy "fix"...
Hi,
Any idea how to make tv clients reset their tv channel order or epg or whatever contains them.
Scanned for AND got some...
Good point, mbuzina. I know that the next version of the Fanart plugin will automatically scrape Last.FM in addition to it's usual source of fanart, and it's been projected that Mediaportal 1.3 will have the Fanart plugin fully incorporated into Mediaportal itself.
Good point, mbuzina. I know that the next version of the Fanart plugin will automatically scrape Last.FM in addition to it's usual...
Hey guys
What tools do you use to download cover art for your music library? MediaPortal doesn't download a cover until you...
Thanks Tony. The info in that thread worked for me.
The VNC trick mentioned in that thread worked perfectly. The Monitor was sending or the HTPC was receiving the wrong EDID information. Catalyst shows "Default Monitor" and went back to 1024x768. Changing this to my Pana's 720p now have everything working perfectly.
Thanks Team...
Thanks Tony. The info in that thread worked for me.
The VNC trick mentioned in that thread worked perfectly. The Monitor was...
Hi All,
I have a dedicated, always on HTPC which I built myself. It's an AMD 780G, AMD low power CPU and runs Media Portal...
MediaPortal Version: 1.2.0 Alpha
MediaPortal Skin: Pure Vision HD Blue
Windows Version: windows 7 Enterprise
CPU Type: Intel Pentium 4 3.0 ghz
HDD: 232.88
Memory: 2gb ram
Motherboard: Pure Vision HD Blue
Video Card: ATI raideon HD 4300/4500 series
Video Card Driver: 8.753.0.0
Sound Card:
Sound Card AC3:
Sound Card Driver...
MediaPortal Version: 1.2.0 Alpha
MediaPortal Skin: Pure Vision HD Blue
Windows Version: windows 7 Enterprise
CPU Type: Intel...
MediaPortal Version: 1.2.0 Alpha
MediaPortal Skin: Pure Vision HD Blue
Windows Version: windows 7 Enterprise
CPU Type: Intel...
Using TV Server config, I unchecked the EPG grab for all channels. Since I use WEBEpg for my TV Guide, I don't think I need the EPG grab feature. It's only been one day since I did that, but my TV server log file has no odd messages any more! :)
Using TV Server config, I unchecked the EPG grab for all channels. Since I use WEBEpg for my TV Guide, I don't think I need the EPG...
For the past week I've been getting these in my log file. I think since I updated to 1.1.2. My log files are huge.
What's it...
It seems that the second tuner to be used for another LNB, meaning you can also receive signals from a wide source,included satellite!But for the last version,you must have duo support for two LNB for different satellites.
Or probably the second tuner is for receiving terrestrial signal.Because I don't have this DVB-S2 card,I'm not sure.
It seems that the second tuner to be used for another LNB, meaning you can also receive signals from a wide source,included...
Hi Guys,
I'm thinking of adding an additional card so I can get Freesat and the HD Channels. I already have a Sky box setup next...
Be careful when using ComClean - I used it for a while, but on recording an episode of Poirot for the GF it cut about 2/3 of the episode.
Imagine:
Set up plot elements and characters, murder happens, [adverts cut from here], Poirot starts his summing up and the murder is revealed.
Unhappy GF.
I think the bruising is starting to fade...
Be careful when using ComClean - I used it for a while, but on recording an episode of Poirot for the GF it cut about 2/3 of the...
MediaPortal Version: 1.1.2.0
MediaPortal Skin: Maya
Windows Version: windows 7 Ultimate
CPU Type: Intel Pentium 4 3.0 ghz
HDD...
Hi all. Hope you can help.
Just before Christmas I reinstalled 1.1.1 from scratch. I decided to use the Microsoft MSQL rather than MySQL as I had in my previous version as it appeared to be slowing up and previously I remember in the past it being said that MSQL was a lot quicker.
Everything seemed to work fine except that...
Hi all. Hope you can help.
Just before Christmas I reinstalled 1.1.1 from scratch. I decided to use the Microsoft MSQL rather...
Hi all. Hope you can help.
Just before Christmas I reinstalled 1.1.1 from scratch. I decided to use the Microsoft MSQL rather...
I hate to post problems, but wondering if someone can help.
When scrolling quickly, especially when scrolling up, my covers are sometimes not displayed properly. This old thread describes the exact problem I am having:
https://forum.team-mediaportal.com/1-0-2-svn-builds-317/covers-somtimes-not-redrawn-properly-66429/
I don't...
I hate to post problems, but wondering if someone can help.
When scrolling quickly, especially when scrolling up, my covers are...
I hate to post problems, but wondering if someone can help.
When scrolling quickly, especially when scrolling up, my covers are...
Hello,
I want to display the OSD to do some testing by using Shift+1 while watching a video, but nothing appears.
I tried Debug-Mode but no success. See logs attached.
Does it need specifics renderers/codecs to work ?
Thanks for the help.
EDiT : I should had read the wiki better. "!" key does the job.
MediaPortal...
Hello,
I want to display the OSD to do some testing by using Shift+1 while watching a video, but nothing appears.
I tried...
Hello,
I want to display the OSD to do some testing by using Shift+1 while watching a video, but nothing appears.
I tried...
If I remember correctly there is some limitation in MS DVD navigator in Windows 7 that wont allow DVD to be played from non-local storage.
Try same in GraphEdit with using the MS DVD navigator (not directly the VOB files).
If I remember correctly there is some limitation in MS DVD navigator in Windows 7 that wont allow DVD to be played from non-local...
MediaPortal Version: 1.1.2
MediaPortal Skin: Maya
Windows Version: Win7 64 bit, all updates
CPU Type: AMD dual core 5700
HDD...