Post problems you have when using MediaPortal,
or pre installation questions in here.
Area: Media Portal Program
MediaPortal Version: 0.2.0.2 (2006-07-22)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPA Decoder Filter
Video Codec: MPV Decoder Filter
CPU Type: Intel Pentium 4 - 3.06GHz
Memory: 2 GB
Motherboard...
Area: Media Portal Program
MediaPortal Version: 0.2.0.2 (2006-07-22)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)...
Area: Media Portal Program
MediaPortal Version: 0.2.0.2 (2006-07-22)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)...
Hello, i am new to HTPC, and a im just building my first HTPC. Up to now i have the following:
- Celeron D 2.66GHz
- 512MB DDR400 Mushkin RAM
- 120GB Hitachi DD
- Hauppauge WinTV-PVR-150 MCE
- MCE Remote
- MSI NX6200AX-TD128LF
My problem is i bought a VLSystems VFD, the M·Play Blast with the remote, but i can't get it to...
Hello, i am new to HTPC, and a im just building my first HTPC. Up to now i have the following:
- Celeron D 2.66GHz
- 512MB...
Hello, i am new to HTPC, and a im just building my first HTPC. Up to now i have the following:
- Celeron D 2.66GHz
- 512MB...
The download section features IR drivers but not for Technotrend models:
"Hauppauge IR components for use with PVR, HVR and Nova-T cards (not the Technotrend version)."
I have the Technotrend version of the Nova-T PCI card. I have the card working fine now, are there any drivers available that would let me get the remote...
The download section features IR drivers but not for Technotrend models:
"Hauppauge IR components for use with PVR, HVR and...
The download section features IR drivers but not for Technotrend models:
"Hauppauge IR components for use with PVR, HVR and...
If you have a genuine MCE remote, then there is no need to use HIP - you just need mptray to enable the "green button" to launch MediaPortal and then all the other buttons will work correctly....
If you have a genuine MCE remote, then there is no need to use HIP - you just need mptray to enable the "green button" to launch...
im using the mce remote on xp home with the xp pro IR drivers, to make it work on home.
i have tried HIP and i can open MP from...
Hey,
got the replacement driver, so then it would not skip two lines each time i press up or down in MP.
this next one is my problem... and i dont know if it was the same before i instaled the driver.
when i play music or video, it wont let me use the top MCE remote buttons, ( rew, ff, pause, stop, skip, play )
i use HIP...
Hey,
got the replacement driver, so then it would not skip two lines each time i press up or down in MP.
this next one is my...
Hey,
got the replacement driver, so then it would not skip two lines each time i press up or down in MP.
this next one is my...
Help please.
I have spent days trying to find out information on how to use HIP to interface to a Set top Box (Austar Satelite TV). A number of posts refer to a plugin called MPCmdEx.
1. I dont seem to be able to find this plugin does it still exist?
2. How do I get MP to talk to HIP?
I am using the original MCE...
Help please.
I have spent days trying to find out information on how to use HIP to interface to a Set top Box (Austar Satelite...
Help please.
I have spent days trying to find out information on how to use HIP to interface to a Set top Box (Austar Satelite...
I have set the Movies folder to be 'E:\My Recordings'. That is also the location where all new recordings are made successfully.
Thanks for your quick reply.
I have set the Movies folder to be 'E:\My Recordings'. That is also the location where all new recordings are made successfully...
Area: Media Portal
MediaPortal Version: 0.2.0.0 (2006-07-10)
MediaPortal Skin: MCE
Windows Version: Windows XP (SP2)
.NET...
Try my method here (it runs independently from mediaportal): https://forum.team-mediaportal.com/viewtopic.php?t=16285
Try my method here (it runs independently from mediaportal): https://forum.team-mediaportal.com/viewtopic.php?t=16285
ive searched the board and come up with some scraps of information.
ive downloaded some software from elecard, in fact i ended...
hi,
i have two tv-cards (PVR 150 and TT budget DVB-C). i did the autotune on PVR 150 and got my channels. after this i also did autotune with my TT DVB_C card. the problem is that i sometimes had the same names for a channel on both cards --> for example SAT.1 (PVR) and SAT.1 (TT). this means now for me that the found digital SAT.1...
hi,
i have two tv-cards (PVR 150 and TT budget DVB-C). i did the autotune on PVR 150 and got my channels. after this i also did...
hi,
i have two tv-cards (PVR 150 and TT budget DVB-C). i did the autotune on PVR 150 and got my channels. after this i also did...
I doubt it, as MediaPortal kills any MCE processes that may interefere, and then starts them again upon exit.
It is more likely that his TV card is not supported by Mediaportal... :(
Here's the info on getting a TV card added to the MediaPortal supported group.
I doubt it, as MediaPortal kills any MCE processes that may interefere, and then starts them again upon exit.
It is more likely...
I have a sony vaio media center edition computer and I can't get the my TV function to work on Media Portal Because I Think MCE is...
Nice 31 views no replies
Nice 31 views no replies
Hi guys i followed the instructions for allowing the play of karaoke in mediaportal but had a slight problem. the screen was...
I figured out how to resolve this. Switching off the TV will help MP go to sleep.
I figured out how to resolve this. Switching off the TV will help MP go to sleep.
I've searched the forums and have not come across anyone with the same problem as myself...
Computer wakes after hibernation to...
Hi,
I'm not sure if this is the forum for this, but has anyone else experienced a problem with the radio cutting out. My settup is running on a PowerColor Theater 550 Tuner card (works perfectly in MCE).
I've updated the drivers, done a clean install of MediaPortal and patched it. It seems to work fine and tunes all the...
Hi,
I'm not sure if this is the forum for this, but has anyone else experienced a problem with the radio cutting out. My settup...
Hi,
I'm not sure if this is the forum for this, but has anyone else experienced a problem with the radio cutting out. My settup...
you could try the my explorer plugin, but i am not sure if you can start playback with it.
there is also a music share watcher, but that will probably only work on music which is in your shares but not imported to the database (haven´t used it myself)
tomtom
you could try the my explorer plugin, but i am not sure if you can start playback with it.
there is also a music share watcher...
Hi guys
I have been using meedio for a while and decided (wisely:) ) to come back to MP. i have a Q thougj, i can figure out how...
OK I stand corrected, partially that is I see that there is a auto compress feature that appears to just this.
OK I stand corrected, partially that is I see that there is a auto compress feature that appears to just this.
about a month agor some made a post on how to change the recording format from dvr-ms to mpeg, I failed to print it and now I...
Is there a good plugin out there to make Windows Media Player sound better? i have played around with the equalizer, but it still sounds bad in comparison to itunes.
Is there a good plugin out there to make Windows Media Player sound better? i have played around with the equalizer, but it still...
Is there a good plugin out there to make Windows Media Player sound better? i have played around with the equalizer, but it still...
Area: Media Portal Program
MP Version: 0.2.0.2
Skin: MCE 16x9
Windows Version: XP Pro SP2
CPU Type: AMD Athlon 64 3000+
Memory: 2gb Kingston PC3200 DDR
Motherboard Chipset: MSI K8N Neo4-F nVidia nForce4
Video Card: MSI NX7900GT-VT2D256E
Video Card Driver: nVidia Forceware 91.31
Video Card Resolution: 1168x668
Video...
Area: Media Portal Program
MP Version: 0.2.0.2
Skin: MCE 16x9
Windows Version: XP Pro SP2
CPU Type: AMD Athlon 64 3000+...
Area: Media Portal Program
MP Version: 0.2.0.2
Skin: MCE 16x9
Windows Version: XP Pro SP2
CPU Type: AMD Athlon 64 3000+...
It's the remote icnluded with a DNTV Live Pro
I updated the drivers for it, to the MCE ones. now most controls work fine, except for DVD menu.
I tried to use HIP for that, but couldn't get hip to recognize it.
Anyway, that's a HIP problem and not a mp problem. The only thing in MP that could fix it, is if i could CHANGE the...
It's the remote icnluded with a DNTV Live Pro
I updated the drivers for it, to the MCE ones. now most controls work fine, except...
I can use all these controls normally, in livetv etc.
But when it comes to DVD, i can't do anything. Not even change my volume...
It ist included since SVN from 07/17/2006. So if you install the newest SVN it should work without changes on your configuration
It ist included since SVN from 07/17/2006. So if you install the newest SVN it should work without changes on your configuration
Hi all,
Have just downloaded and installed Freecom's BDA drivers for the USB DVB receiver - freely available from their...
You could write a vbs script that is run every time when PC wakes up from the resume. In that script call ipconfig /renew <some>.
Not sure if it works, but if you can use manually ipconfig to estabilish the connection after resuming then it should work.
You could write a vbs script that is run every time when PC wakes up from the resume. In that script call ipconfig /renew <some>...
When resuming from standby I don't have any wireless network. I have to manually repair the connection. Does anyone have a solution...
nevermind, seems to have solved itself (odd)
nevermind, seems to have solved itself (odd)
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 (2006-07-03)
MediaPortal Skin: Project X
Windows Version: Windows XP...
ADS is just a bullshit company. I paid $120 for this card, and not even the software it comes with can tune HDTV, or analog for that matter, theres no sound.
I even tried it on my linux computer, not supported there either. So my conclusion: Don't buy from ADS.
/rant.
ADS is just a bullshit company. I paid $120 for this card, and not even the software it comes with can tune HDTV, or analog for...
I just got an ADS InstantHDTV card to watch over-the-air HD programs. The software it gave me, beyondTV, doesn't detect any HDTV...
bump!
bump!
Hey, i'm using a DNTV Live Pro! Remote control, and i've finally managed to get most if it mapped out well.
It works then...
You should edit this post, pasting your mediaportal.log to http://pastebin.team-mediaportal.com/ and then link to the log at the pastebin..
Morten.
You should edit this post, pasting your mediaportal.log to http://pastebin.team-mediaportal.com/ and then link to the log at the...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 (2006-07-03)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)...
or look at this uk
http://www.ebuyer.com/UK/product/54890/rb/20634091150
But if you can stretch to it a 6200 version, just give up the chocolate for a couple of weeks :lol:
or look at this uk
http://www.ebuyer.com/UK/product/54890/rb/20634091150
But if you can stretch to it a 6200 version, just give...
I bought a Twinhan 3054 dvb-t tuner recently. The software with it is very hit and miss, so I've tried various programs to get...
Hi sambuddy
I would say no, the conflict potential would be enormous, whichever one you wish to use, make sure the one you do not want to use is removed via the bios, so it is totally disabled.
8)
Hi sambuddy
I would say no, the conflict potential would be enormous, whichever one you wish to use, make sure the one you do...
Hello All,
I was wondering if it is possible to have two sound cards in your PC so you could have two different things playing...
Try installing the latest ATi drivers. That and the latest CVS worked on my brother's system.
Try installing the latest ATi drivers. That and the latest CVS worked on my brother's system.
pastebin of MP log and error log
The Template maker errored out.
Area: Media Portal TV
MP Version: 0.2.0.2
Skin: MCE...
Some ordinary receivers require only one smartcard but have multiple tuners....
Some ordinary receivers require only one smartcard but have multiple tuners....
does MP support any standalone CI unit without having a TV card along with it ? ie i already have CAM and subscription card.
i...
Hmm, I still can't get this damn DVD drive to function properly.
Reinstalled WinDVD and now I get the studio logo from discs playing, including WMP and MP, then a freeze. I have disabled the error reporting to stop the CPU bottleneck.
I have no idea why this suddenly started. I have tried all versions of 0.2.0 including the...
Hmm, I still can't get this damn DVD drive to function properly.
Reinstalled WinDVD and now I get the studio logo from discs...
Ok, I have one major gripe before I am totally happy with my HTPC setup. I should add that I don't think this problem is a MP...
Just reread my post and see that it was a tad confusing. I wasn't wanting to use myblaster with HIP. It is just that HIP and myblaster are the only two progs I know of which I can use to control my IR blaster to the STB. I have to use IR as no other interface available i.e serial. My blaster doesnt want to work properly as per an...
Just reread my post and see that it was a tad confusing. I wasn't wanting to use myblaster with HIP. It is just that HIP and...
Area: Media Portal Plugins
MediaPortal Version: 0.2.0.0 (2006-07-03)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...