Hello,
i have got 2 Tv-Cards. One has got a CI Modul for Pay Tv. I will watch and record Pay Tv at the same time with only 1 Smart Card. Is that possible? If it's possible, how will it work?
Hardware:
Twinhan DTV - S CI
Hauppauge Nexus S (will soon work with MP)
thank u for any support
Hello,
i have got 2 Tv-Cards. One has got a CI Modul for Pay Tv. I will watch and record Pay Tv at the same time with only 1...
Hello,
i have got 2 Tv-Cards. One has got a CI Modul for Pay Tv. I will watch and record Pay Tv at the same time with only 1...
WMA VBR Solved by....
... In MediaPortal - Setup / Music, make sure that the "Load ID3 tags from file..." option is checked. Now all the info displays correctly, along with the correct playing time etc.
WMA VBR Solved by....
... In MediaPortal - Setup / Music, make sure that the "Load ID3 tags from file..." option is checked. Now...
I've noticed that when playing WMA VBR files the "Now Playing" screen does not display any track information.
MP3's are fine...
Guys, is there any solution to this problem? My card is listed as supported, and it works just fine with every software I've tried. I'm using Intervideo's filters to successfully encode mpeg2 streams but MediaPortal still says there's no card available. A couple of weeks ago I reinstalled my OS (due to other reasons) but this...
Guys, is there any solution to this problem? My card is listed as supported, and it works just fine with every software I've...
Hi everybody,
I'm using this card with the latest TV2000 XP drivers, it works fine with every software I've tried (WinDVR...
i'm just guessing now because i'm not entirely sure why yours takes so long to jump, normally you press it , it shows 15+ and then it skips to forward, perhaps there is a crazy setting in the ZAP OSD delay on yours, in the settings of MP there is an option under general from memory that has the ZAP delays, check to see if yours is...
i'm just guessing now because i'm not entirely sure why yours takes so long to jump, normally you press it , it shows 15+ and then...
Note I tried to use the tool for autogenerating the support template but got a run time error. I will attempt to fill in the...
Anyway, each new svn build is expected to be better than the previous... How could that be different ;).
In some case , new features or fixes may introduce new issues.
So when such a case occurs, better is to rollback to previous releases...waiting for a new fixed release.
As said before, they are released as it.
MP testers may...
Anyway, each new svn build is expected to be better than the previous... How could that be different ;).
In some case , new...
I realise this may have been asked before, but I can find no reference to this question either in the faq or the forums.....
I...
The ATI X-series of AIW cards are causing too many problems with the current TV engine to be able to support it.
I have seen three different sets of information for the same card moniker which breaks normal TV card and our engine rules so we'll have to look into this after the 0.2.0 release.
DMAN
The ATI X-series of AIW cards are causing too many problems with the current TV engine to be able to support it.
I have seen three...
Area: Media Portal Program
MediaPortal Version: 2.000 RC2
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR...
I noticed a lot of fixes over this weekend, some of which although specifically aimed at the dropping TV signal bug, sounded like they might resolve the problems we've had recording episodes of Lost (and other TV programmes with black screens showing for a short time).
Sure enough, I'm really pleased to report that I recorded my...
I noticed a lot of fixes over this weekend, some of which although specifically aimed at the dropping TV signal bug, sounded like...
Area: My TV
MP Version: 0.2.0.0 RC2 CVS of 06/02/2002
Skin: mce
Windows Version: XP Home SP2
CPU Type: AMD Athlon 64 2800+...
First of all even if the resize button in ffdshow is turned to off, the acpect ratio settings still functions so go there and select no AR correction.
Second, you can only get a good picture with ffdshow Lanczos resize if your source is film based where simple weaving (combining) the odd and even fields of film content is enough...
First of all even if the resize button in ffdshow is turned to off, the acpect ratio settings still functions so go there and...
Please share your ideas.
I use 43" Plasma (1024x768), set the gfx card to somewhat like 1244x680 (for overscan compensation)...
I just uploaded a new patch that fixes the startup issue and also provides dynamic/realtime adjustment of scaling+offset via the settings-uicalib page.
Hopefully this can be put in the SVN soon...
See:
https://sourceforge.net/tracker/index.php?func=detail&aid=1438829&group_id=107397&atid=647927
I just uploaded a new patch that fixes the startup issue and also provides dynamic/realtime adjustment of scaling+offset via the...
I've probably missed it, but where do i resize the skin so i can see the whole skin on my 32" CRT - like it is now i only seem to...
Steve,
You could be right. I am using the g-force visualization. It does apear that the logger quits loging when this happens. Below is a cut and past from the log
6/18/2006 10:24:45 PM Command:MediaPortal.TV.Recording.StopRadioCommand failed reason:No tuner cards installed time:0 msec
6/18/2006 10:24:46 PM...
Steve,
You could be right. I am using the g-force visualization. It does apear that the logger quits loging when this...
Area: Media Portal Program / Media Portal Skin
MP Version: RC4 with the 6/17 daily snapshot (but issue also seen with RC2).
Skin...
why not move the Percentages more to the right ?
that would fix that problem :)
but i think there might be a way for the dev to make it so it fits correct for all languages
why not move the Percentages more to the right ?
that would fix that problem :)
but i think there might be a way for the dev...
Gentlemen,
I happen to come across the absolutley ugly effect: text passages overwrite each other on the screen. Example...
The firewire instability can also be cured by disabling the firewire networking device in the device manager. The swedish D-E distributor has a nice howto:
http://www.tystpc.nu/forum/viewtopic.php?t=496
It's in swedish but you get the idea if you have a look at the pictures :)
The firewire instability can also be cured by disabling the firewire networking device in the device manager. The swedish D-E...
Hi to all!
My FloppyDTV-C gives me a few headaches. From time to time, the tuner disconnects itself from the FireWire bus and...
That's an issue I dislike, too.
Though I use TV logos, it's very hard to identify which TV logo is shown?
'cause there are even very small logos and no way to identify on a CRT.
Would like to have the channel name here.
Much better to read, I guess, for everyone.
Regards
Ralph
That's an issue I dislike, too.
Though I use TV logos, it's very hard to identify which TV logo is shown?
'cause there are even...
MP RC4, svn 17-jun-2006
Hi,
After I've scheduled a recording (manual or via TV guide, no difference) I'm unable to determine...
Downloaded the latest Testrelease 0.2 RC4 installing it scans for music photo's and video that's ok so far.
My movies are stored in a folder called Films but media portal only find the folder film and not the subfolder's with the movies..
This has always worked fine but now it does not.
:(
Downloaded the latest Testrelease 0.2 RC4 installing it scans for music photo's and video that's ok so far.
My movies are stored...
Downloaded the latest Testrelease 0.2 RC4 installing it scans for music photo's and video that's ok so far.
My movies are stored...
I've installed the older version of MP and now the card is recognised but cant seem to find any chanels and the card is not being listed as a Asus card only a 713xBDA analoge capture card (general S/W encoding card)
So im not sure where to go from here i've tried changing some setting but cant seem to tune anything in the screen...
I've installed the older version of MP and now the card is recognised but cant seem to find any chanels and the card is not being...
My problem is that Mp cant find my TV-card
All other programs have no problem with that
My configuration is this.
Area...
Hi,
Because of bug hunting (& I don't hope they stop with that) :D , the devs has added more logging, thats why.
When the bugs are found & corrected this will be gone again.
Regards
Roy
Hi,
Because of bug hunting (& I don't hope they stop with that) :D , the devs has added more logging, thats why.
When the bugs...
Hi,
is there any way to disable the logging or is there a way to set log-levels like "less", "normal", "debug"?
Second, why...
MSI Mega Sky 580 USB Stick, Tuner:ULi M9207
This device seems that is not working with mediaportal.
The installation went fine, but when I try to scan for channels,
The configure application crash.
If I press the button “Edit†under MediaPortal Setup | Television | Capture Cards „MSI Mega Sky 580“ I get the error...
MSI Mega Sky 580 USB Stick, Tuner:ULi M9207
This device seems that is not working with mediaportal.
The installation went fine...
MSI Mega Sky 580 USB Stick, Tuner:ULi M9207
This device seems that is not working with mediaportal.
The installation went fine...
I had a 2004 version that was recommended here in the forum..
Now I have a 2005 version (think Nov/Dec)..
This one is better, but sometimes it compresses the picture horizontally.. I mean the right half is black..
I do not know what is causing this as all resize options are off!!
I had a 2004 version that was recommended here in the forum..
Now I have a 2005 version (think Nov/Dec)..
This one is better, but...
Area: MP
MP Version: 0.2 RC4 (latest SVN)
Skin:
Windows Version: XP Home
CPU Type: AMD 3400+
Memory: 1Gb
Motherboard...
i can't help you with the hauppauge still have another card but for the problems with fast movements:
try to enable deinterlacing and better use a codec that supports hardware acceleration with that (like the intervideo or Cyberlink or Nvidia codec) instead MPA/MPV
i can't help you with the hauppauge still have another card but for the problems with fast movements:
try to enable...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-13.06.2006- 1:55:07,19
(2006-06-13)
MediaPortal Skin: Nonafo...
Taipan: The clone mode of the nvidia driver was my first thought as well, but therefore the touchscreen must be able to display the same resolution as the other display, i.e. 1280x720 in my case. I think the one that comes with a silverstone lc18 can do that resolution but I'm not sure if the (cheaper) Dign X15e is capable of this...
Taipan: The clone mode of the nvidia driver was my first thought as well, but therefore the touchscreen must be able to display the...
Hello Everyone,
I am looking at setting up a MP with an LCD touch screen as a media centre in our kitchen. Has anyone setup MP...