Having trouble installing or configuring MediaPortal?
MediaPortal Version: 0.2.3.0
MediaPortal Skin: BlueTwo
Windows Version: Windows XP Home Edition
CPU Type: AMD 64 3000+
HDD: 160Gb SATA
Memory: 1024mb DRR400
Motherboard: AX8
Video Card: HIS X800XL
Video Card Driver: Catalyst 7.12 (latest)
Sound Card: Integrated
Sound Card AC3:
Sound Card Driver: Realtek AC'97
1. TV Card: ASUS WDM...
MediaPortal Version: 0.2.3.0
MediaPortal Skin: BlueTwo
Windows Version: Windows XP Home Edition
CPU Type: AMD 64 3000+
HDD: 160Gb...
MediaPortal Version: 0.2.3.0
MediaPortal Skin: BlueTwo
Windows Version: Windows XP Home Edition
CPU Type: AMD 64 3000+
HDD: 160Gb...
Hi Fraddy
I don’t fully understand your question, but mpeg2 will average between 20-to-70mb/min..... depending mainly on which "Resolution" and "Audio bitrate" you are recording at.
Hi Fraddy
I don’t fully understand your question, but mpeg2 will average between 20-to-70mb/min..... depending mainly on which...
TV-Server Version:
MediaPortal Version 0.2.3.0:
MediaPortal Skin original:
Windows Version WinXp prof:
CPU Type Athlon XP...
it seems it wokrs
I have been trying to fix these issue, video chopped and video lag, and seems that I found the way how to fix it. Just now I'm trying it. Later I will write how I fixed it
it seems it wokrs
I have been trying to fix these issue, video chopped and video lag, and seems that I found the way how to fix...
TV-Server Version:
MediaPortal Version: 0.2.2.0
MediaPortal Skin: BlueTwo Wide
Windows Version: Windows XP SP2
CPU Type: Intel...
Let's hope so!
Again and(amp) again!:P
YAAAAAAY !!!!!!!!!!!!!!!!!!
That was the big problem.
Mister D I love you sincerly :D
If I could give you a thousand "thank you"s, I would!
THank you very much for all of your time, patience and help!
Gregman
Let's hope so!
Again and(amp) again!:P
YAAAAAAY !!!!!!!!!!!!!!!!!!
That was the big problem.
Mister D I love you sincerly :D...
Hello!
I've got a big problem and since I'm new to this scene, I would really appreciate it if you helped me out a little.
I...
I've got a little problem. I tried to map all buttons on my serial remote. Most of them will work,but not the specific buttons for tv, pictures etc.
How do I map a button to switch a window?!?
I'll tried this:
<entry actionInt="600" actionDescription="WINDOW_TV">56</entry>
But "WINDOW_TV" is not a refered action, is there...
I've got a little problem. I tried to map all buttons on my serial remote. Most of them will work,but not the specific buttons for...
I've got a little problem. I tried to map all buttons on my serial remote. Most of them will work,but not the specific buttons for...
Anyone have any ideas? Is anyone else seeing the same thing?
Does anyone know if this is a bug, or by design?
Anyone have any ideas? Is anyone else seeing the same thing?
Does anyone know if this is a bug, or by design?
TV-Server Version: 0.3 16907
MediaPortal Version: 2.3.0 16907
Windows Version: XP SP2
CPU Type: Athlon xp 3200+
HDD: 1 x SATA...
works ok form me.
Fast. No issues.
I only have issues with my TV card now. When opening my tv the audio/video is out of sync.
But that is not related to the skin I think ;)
thx btw for making this light skin.
works ok form me.
Fast. No issues.
I only have issues with my TV card now. When opening my tv the audio/video is out of sync...
TV-Server Version: No use yet
MediaPortal Version: 0.2.3.0
MediaPortal Skin: BlueTwo
Windows Version: WinXP Pro NL SP2
CPU...
There are lots of things to make picture better.
See setup:
Try switching codec. Please fill out you system in profiel, and I might be able to give you directions :)
- In general: CyberLink and InterVideo are good - or PureVideo (nVidia)
You can also enable EVR (since you are running Vista) - note that this is experimental!
Please...
There are lots of things to make picture better.
See setup:
Try switching codec. Please fill out you system in profiel, and I might...
Hi
Newbie to this.
I have a hauppage 150 and have to use component in for receiving signal from satbox. But no signal will show...
The sound goes through the PCI, I have the latest Drivers installed.
Im trying a fresh Install, with only FFDShow installed Ill see how that goes
The sound goes through the PCI, I have the latest Drivers installed.
Im trying a fresh Install, with only FFDShow installed Ill...
TV-Server Version:
MediaPortal Version: 2.3
MediaPortal Skin: wide
Windows Version: Vista Home Premium
CPU Type: AMD 4000 Dual...
Hi,
I'm having problems installing my MCE Remote that came with my Hauppauge PVR 150 MCE Kit. XP Pro just wont recognize it, I plug it in and it says SMK 2006 Transceiver but thats it. It asks for the drivers but can't find it. I've searched the forums and tried all of the advices. Used XP rollup patch, trying to copy the irbus and...
Hi,
I'm having problems installing my MCE Remote that came with my Hauppauge PVR 150 MCE Kit. XP Pro just wont recognize it, I...
Hi,
I'm having problems installing my MCE Remote that came with my Hauppauge PVR 150 MCE Kit. XP Pro just wont recognize it, I...
:thx: - Perfect!
after removing and reimporting all the files all is good.
thank you for your time and effort to help me resolve my enquiry (and my apology for not including the file type initially).
regards...
...jC67
:thx: - Perfect!
after removing and reimporting all the files all is good.
thank you for your time and effort to help me...
hi all...
...in Music View i am able to display my music based on albumartist however i am unable to sortby albumartist (only...
It changed on 20th August 2007.
Saying that, I found 2007 seemed to fly past so 20th August does not seem that long ago.
Mew
It changed on 20th August 2007.
Saying that, I found 2007 seemed to fly past so 20th August does not seem that long ago.
Mew
TV-Server Version:
MediaPortal Version: 2.3.0.0
MediaPortal Skin: Spinsafe Revolve
Windows Version: XP SP2
CPU Type: Intel...
Thanx - CoreAVC was already selected! Still i cannot play a 1080i (ts) movie. CPU is always at 99%.
Thanx - CoreAVC was already selected! Still i cannot play a 1080i (ts) movie. CPU is always at 99%.
Hello,
I want to build a media center and want to use the following hardware:
Nvidia 8600 GT
FireDTV DBV-C
Creative X-Fi PCI-e...
Try WatchHDTV. The AVSforum has a long thread on it. It's a really simple solution to getting your tuner up and running AND it will provide you with the exact name the device goes by. The BDA driver name will present itself to you when you use the built-in "info" utility. It's this name that the CaptureCardDefinitions.xml file...
Try WatchHDTV. The AVSforum has a long thread on it. It's a really simple solution to getting your tuner up and running AND it...
MediaPortal does not detect my card when i try to configure capture devices.. Is there any way to get it working? Im running...
Make sure FFDshow or some other filter is NOT popping up and stealing the audio from AC3Filter. This is an issue of Merit for each filter. Also, be sure you have AC3Filter selected for the audio codec for MOVIES -- you're playing these video .avi files from MyVideos, aren't you?
Make sure FFDshow or some other filter is NOT popping up and stealing the audio from AC3Filter. This is an issue of Merit for each...
TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard...
It's all in the initial setup of the SD plugin/configuration and that initial TV channel SCAN. Or so that's how I have been getting the channels to match the PSIP the broadcasters are using. Do just what was described for the Zap2it plugin.
As far as icons... do you mean the channel logos? I snagged all mine from the internet...
It's all in the initial setup of the SD plugin/configuration and that initial TV channel SCAN. Or so that's how I have been...
How to I get the Channel names to import from schedules direct? is there an Icon back from Analog Comcast San Francisco
Yes - I used to run reclock + nvidia codec.
I ran it since it happened to fix a 5.1 channel sound issue where I didn't get a centre channel for live tv (reclock replaces the buggy audio renderer). I subsequently fixed this issue - so don't need reclock any more.
Yes - I used to run reclock + nvidia codec.
I ran it since it happened to fix a 5.1 channel sound issue where I didn't get a centre...
Does somebody know if one can use reclock and hardware acceleration at the same time with MP?
AFAIK postprocessing is not possible...
Hi Dexx
Can i just check that i understand your request, as currently if i press 1 on my mce remote, it takes me to BBC1 (first channel), button 2, BBC2 etc, so it follows channel order.
Are the numeric no's actually mapped on your remote, or is your request how do i do it.
Can you tell us exact model remote\TVcard model and...
Hi Dexx
Can i just check that i understand your request, as currently if i press 1 on my mce remote, it takes me to BBC1 (first...
I'm running MP 0.2.3.0 with a DVICO tv tuner + remote. All is well - i have the remote configured to run MP using its standard key...
I had actually started down this path (w/ source code) but I had limited time with my one and only STB as the wife had control over it mostly in the evenings. Well that hurdle has been overcome as I now have two STBs.
I'll see what I can figure out and post my findings. In the interim I am just using CapDVHS to store off TS files...
I had actually started down this path (w/ source code) but I had limited time with my one and only STB as the wife had control over...
TV-Server Version:
MediaPortal Version: 0.2.3.0
MediaPortal Skin:
Windows Version: XP SP2
CPU Type: 2 Intel Xeon 3.0 GHz...
When I have an audio-cd in the DVD-drive. I cant start that with My DVD, it will only play DVD´s.
Can My DVD be configured to play any files from the drive?
When I have an audio-cd in the DVD-drive. I cant start that with My DVD, it will only play DVD´s.
Can My DVD be configured to play...
Just installed a plextor PX-608AL DVD-drive in my mediaplayer and I have some questions regarding;
1. Is it possible to fix the...
thanks Aaron. I will follow your hint ...
I want to have 2 independant units. When I hook the STB up to the PVR 150 it is treated as one ... I want to record channel a while watching channel b ...
thanks+regards
WeWe
thanks Aaron. I will follow your hint ...
I want to have 2 independant units. When I hook the STB up to the PVR 150 it is treated...
Hi all,
I have a working setup with a Hauppauge WinTV PVR 150. Now I found my old Pinnacle PCTV Rave and made it to set MP up to...
I have the same problem, excuses for bringing back an old topic :)
Additionally, I also have all 'mouse actions' still going over the pc loudseakers who use the (default) onboard realtek audio.
I bought a Soundblastercard for MP output. It works great with coax radio, tv and music though.
Is there a way to make at least the...
I have the same problem, excuses for bringing back an old topic :)
Additionally, I also have all 'mouse actions' still going...
Hi guys,
This is my first post here because there is one thing I'm not able to set up properly.
I'm using 2 soundcards in my...
I have the same problem and the only way I can think of is to split a single signal before it reaches the TV and somehow downconvert it from 1080p to 576i. I hoped to find a receiver that would do this for me but I'm having trouble finding one, so much so that I don't think it can be done using an amp. There's probably a Keene or...
I have the same problem and the only way I can think of is to split a single signal before it reaches the TV and somehow...
I have a 50" plasma in my lounge room where my media centre is. its a HD 1080p so the res is high. my computer is also connect via...
Not realy connected but noticed on fresh instal of VISTA 32 and MP that the Microsoft Visual C++ installed by MP was out of date and needed to go to
http://www.microsoft.com/downloads/thankyou.aspx?familyId=200b2fd9-ae1a-4a14-984d-389c36f85647&displayLang=en
And get the updated routines.
This probelm raised its head when...
Not realy connected but noticed on fresh instal of VISTA 32 and MP that the Microsoft Visual C++ installed by MP was out of date...
TV-Server Version: 0.2.3_RC3 - Latest SVN
MediaPortal Version: 0.2.3_RC3 - Latest SVN
MediaPortal Skin: X Face
Windows Version...
I can't really help you with the choppy video and the experts will definitely need much more information before they will be able to assist you. Example: system specs including graphics card. Log files - preferebly generated with the MPTesttool2.exe in your MediaPortal directory.
Same with the guide data. Need more info. Which...
I can't really help you with the choppy video and the experts will definitely need much more information before they will be able...
Hello,
I installed Media Portal a few nights ago and have been trying to get my pvr-1600 to work correctly. I am trying to...
The TVguide.xml has to be in the same folder as the DTD file, Vista that would be c\program DATA\team mediaportal\mediaportal\xmltv folder.
As for EPG grab over air, ticking the option "grab EPG from DVB" should be enough. of course this may take a hour plus with MP running to fully populate.
The TVguide.xml has to be in the same folder as the DTD file, Vista that would be c\program DATA\team mediaportal\mediaportal\xmltv...
MediaPortal Version: Latest stable release
MediaPortal Skin: Default
Windows Version: Vista home premium 64
CPU Type: Athlon 64...
This tv card ,TV-7131/FM Hybrid TV Tuner , can be used and tuned in with the following apps
Windows media center , power cinema, and an app called prog dvb5
But i want to be able to use the tv card with mediaportal, can anyone help me out with this please ....
This tv card ,TV-7131/FM Hybrid TV Tuner , can be used and tuned in with the following apps
Windows media center , power cinema...
I need help with my new pc , a packard bell IXTREME 2712,with windows vista , built in tv card with media center
i have media...
Trying to access CI Menu, no menu is shown.
I have been playing around with MediaPortal TV-Server to be able to watch one channel and record another. One of the things to check when it’s not working is “multi-channel decryption”. Basically what you do is click the CI application and select ”enter CI Menu” and there you are supposed...
Trying to access CI Menu, no menu is shown.
I have been playing around with MediaPortal TV-Server to be able to watch one...
Trying to access CI Menu, no menu is shown.
I have been playing around with MediaPortal TV-Server to be able to watch one...
big thanks for your post and-81!
the program works acceptable (but took me some time to be familiarised in it ;) )
your doing a great job, keep up that great work!
Ok now my problem is fixed :)
Thanks a lot
big thanks for your post and-81!
the program works acceptable (but took me some time to be familiarised in it ;) )
your doing a...
Hey,
I'm using the Hauppauge MCE remote control kit.
Click here for a image of it
The remote is working fine for Windows and...
Back in the days when I installed my MediaPortal the first time I found a reg-hack along with a script or something that enabled the function to start MediaPortal using my FireDTV remote. Basically what it did was start MediaPortal and closed the “RemoteControl.exe” application. When MediaPortal.exe exited it started the...
Back in the days when I installed my MediaPortal the first time I found a reg-hack along with a script or something that enabled...
Back in the days when I installed my MediaPortal the first time I found a reg-hack along with a script or something that enabled...