Oooops, cam here by scanning the New Posts list, so I did not see that. Sorry for patronizing ;-)
Oooops, cam here by scanning the New Posts list, so I did not see that. Sorry for patronizing ;-)
I have never gotten these to work properly.
They always appear under every other window open, making them un-usable.
Did these...
Pretoriano, Keys from debug log for this Remote
http://www.freewebs.com/xbox360country/remote.jpg
Microsoft MCE (3031) - open/close
Microsoft MCE (2971) - xbox key
Microsoft MCE (3059) - on/off
Microsoft MCE (3044) - replay/prev chapter
Microsoft MCE (3050) - rewind
Microsoft MCE (3046) - stop
Microsoft MCE (3047) - pause...
Pretoriano, Keys from debug log for this Remote
http://www.freewebs.com/xbox360country/remote.jpg
Microsoft MCE (3031) -...
MediaPortal Version: 1.0.2
MediaPortal Skin: Blue
Windows Version: XP Pro SP3
CPU Type: Pentium D 930
HDD: 250GB Sata
Memory...
I mentioned in my last post that I needed to remap my volume keys since they no longer worked after I disabled automatic handling of the MCE remote. I did it the easy way of simply mapping the volume up and down keys to the + and - keyboard presses.
I just found...
I mentioned in my last post that I needed to remap my volume keys since they no longer worked after I disabled automatic handling...
Hi all
This is my first post and I hope someone will be able to help me as I have now exhausted all I could think of in terms of...
I'am confused as well :S
Simone
I'am confused as well :S
Simone
There is a small issue with the input mapping in the MP control plugin for the "MyVideo" section of the abstract remote model. It...
I am running version 3664 with the MCE receiver/blaster. Some of the IR Commands for my older Sony receiver no longer work. Most annoying is that I can increase volume but not decrease it.
I had been using Girder with the replacement driver and plugin and was able to control the receiver just fine for many years. I bought a...
I am running version 3664 with the MCE receiver/blaster. Some of the IR Commands for my older Sony receiver no longer work. Most...
I am running version 3664 with the MCE receiver/blaster. Some of the IR Commands for my older Sony receiver no longer work. Most...
reeven,
I don't think anyone is trying to use IRSS to map their gamepads.
The problem is that it locks the ability for other programs (including xpadder) from accessing the controller at all.
reeven,
I don't think anyone is trying to use IRSS to map their gamepads.
The problem is that it locks the ability for other...
Yesterday I have bought the brand new XBox 360 wired controller (gamepad) and connected it with my WindowsXP based PC.
It was...
Hello,
I've installed this on Windows 7 with TV Server. The TV3ExtChannelChanger appears in my plugins list and I've activated it, but when I click on the plugin to configure it, I don't see the config screen. I am guessing I have something in the wrong place.
I have the STB folder from inside AppData at
C:\ProgramData\Team...
Hello,
I've installed this on Windows 7 with TV Server. The TV3ExtChannelChanger appears in my plugins list and I've activated...
Hi all
i have installed all required software i even followed the videos supplied here for tv3 server.i have setup the external...
Hello (devs?),
Currently i'm using this simple-made receiver through WinLIRC, but maybe it would be possible to create this plugin also to IRSS? The code that is used for WinLIRC plugin is in C++ and available here: SourceForge.net Repository - [winlirc] Index of /trunk/DLL/AudioCapture . I don't have personally that good...
Hello (devs?),
Currently i'm using this simple-made receiver through WinLIRC, but maybe it would be possible to create this...
Hello (devs?),
Currently i'm using this simple-made receiver through WinLIRC, but maybe it would be possible to create this...
thanks chemelli,
seems like the most easiest obvious answer :ooops:
every time i went to download post, i seemed to forget i had updated to 1.1 and so downloaded the older build.
thanks for your quick response
thanks chemelli,
seems like the most easiest obvious answer :ooops:
every time i went to download post, i seemed to forget i...
hi,
ive been searching for a solution to this for a few days now but couldn't find anything helpful.
im running MP 1.1 on...
Now working...?
I'm on holiday and so fiddling around with this (why?) and I deleted something that wasn't working (a USB CCTV camera system, SuperDVR) - has ZERO relationship to IR since it does not have it.
But somewhere in the process, IRSS turned green and started working!
No idea why or if it IS related, weird.
I had...
Now working...?
I'm on holiday and so fiddling around with this (why?) and I deleted something that wasn't working (a USB CCTV...
This was working fine just after I upgraded to MP 1.1.0, then it stopped about a week ago.
Setup is MP on fully patched (as of...
Hi, I'm using this software on Windows 7 32-bit, in conjunction with an old HP MCE USB receiver, and my TiVo remote (set to switch position 2). It seems to be working, except that pushing and holding the directional pad results in scrolling that is not as fast as I would like. I've used Lirc with XBMC Live which could also see my...
Hi, I'm using this software on Windows 7 32-bit, in conjunction with an old HP MCE USB receiver, and my TiVo remote (set to switch...
Hi, I'm using this software on Windows 7 32-bit, in conjunction with an old HP MCE USB receiver, and my TiVo remote (set to switch...
Just installed 1.1.0 and using IRSS - which is sweet. is comparatively painless to configure (especially for the UK Sky box) and [after restarting TV Service] and now works.
Thank you.
Now at the risk of complicating it, is there any way of making it send a 'Power On' before the channel change.
There is NO WAY, this is...
Just installed 1.1.0 and using IRSS - which is sweet. is comparatively painless to configure (especially for the UK Sky box) and...
Just installed 1.1.0 and using IRSS - which is sweet. is comparatively painless to configure (especially for the UK Sky box) and...
Zepman:
Thanks for your suggestions. I think I may have fixed the issue - the Debug Tool definitely helped! :)
What I did was I have to go into the IRSS Control Plugin with MP, and delete my remote model/key mappings (I had MCE Remote (full) selected), and add a new remote call "Abstract Remote Model" and it works. The prompt to...
Zepman:
Thanks for your suggestions. I think I may have fixed the issue - the Debug Tool definitely helped! :)
What I did was I...
Hi:
I had MP 1.0.2 with IRSS 1.4.2.3158 working fine, but yesterday I took the plunge and upgraded to MP 1.1.0 Final, and I have...
I have exactly the same error plus one additional when restarting tv service.
error log attached.
I have exactly the same error plus one additional when restarting tv service.
error log attached.
When stopping the TV service, the following exception is thrown:
2010-07-01 11:13:46.484375 [(5)]: Exception...
I have a pinnacle usb receiver. The one with the two blaster ports and comes with the remote. I dont like the remote as much as I do my xbox 360 MCE remote (the extended one). It picks up in the debug client for IRSS with just codes obviously but when trying to assign buttons to commands in intelliremote it won't recognize. Can...
I have a pinnacle usb receiver. The one with the two blaster ports and comes with the remote. I dont like the remote as much as I...
I have a pinnacle usb receiver. The one with the two blaster ports and comes with the remote. I dont like the remote as much as I...
Hi
i'm trying to use IRSS with my Asus remote (the one with the EB1501 eepc, but it's used with other asus products too).
The remote emulates a keyboard, so many of the buttons are already working.
I need to have IRRS learn mainly the info button, but having the multimedia ones (movie, audio, foto and eepc) work in MP (now the...
Hi
i'm trying to use IRSS with my Asus remote (the one with the EB1501 eepc, but it's used with other asus products too).
The...
Hi
i'm trying to use IRSS with my Asus remote (the one with the EB1501 eepc, but it's used with other asus products too).
The...
I saw your post in "IMON IRSS Version (no official version)" thread. I have exact the same symptoms. I even asked in this thread for current status of this issue - no answer though.
Did you find the solution for this or we should wait for MP1.1?
Regards,
kesar
I saw your post in "IMON IRSS Version (no official version)" thread. I have exact the same symptoms. I even asked in this thread...
XP SP3 /MP 1.0.2 / Silverstone LC16-M Case / IMON VFD + IMON PAD remote
Installed disaster's IRSS version for imon
Instructions...
I think this, maybe help you.
Turn Off your Display Using a Windows Shortcut and More - TechSpot
Just do a key launch this program passing the parameter.
[]'s
I think this, maybe help you.
Turn Off your Display Using a Windows Shortcut and More - TechSpot
Just do a key launch this...
Hi
I'm looking for a method to turn my Display (Generic PC TFT Display, not a TV) off (and on) with a remote key.
The only thing...
It seems to be working now, all i needed to do is restart computer.
Sorry for bothering.
Regards,
Oleg
It seems to be working now, all i needed to do is restart computer.
Sorry for bothering.
Regards,
Oleg
Hi All,
I am using MP RC4 on windows 7 32bit, IR Server Suite - Test Build 1.4.2.3598, ms MCE remote controll with ir...
I d like to donate for this working thing for me in 100 % contrary to MP with a long long long journey to the REAL final release :)
and would be good to have there possibility all the system commands like "volume up, down", ...
thank you!
I d like to donate for this working thing for me in 100 % contrary to MP with a long long long journey to the REAL final release :)...
I d like to donate for this working thing for me in 100 % contrary to MP with a long long long journey to the REAL final release :)...
Many thanks for taking the time to reply.
I ended up digging out girder4 and now have it working well. I think a further confusion in all this was the fact that recent MP versions seem to be case sensitive for keyboard short cuts. Presumably this was not always so.
Any way I have remote working very well now via USB-UIRT without...
Many thanks for taking the time to reply.
I ended up digging out girder4 and now have it working well. I think a further...
Please can someone point me in the direction of a table which gives me the codes required for keys to be sent to MP from a remote...
I recently upgraded to RC3 and the latest version of IRSS (build 3598). I had been using the MP control plugin to exit mediaportal. When I upgraded, I have noticed that MP will not exit until another key is pressed (after the key I defined to exit MP). I worked around this by defining an up arrow on my remote to be sent immediately...
I recently upgraded to RC3 and the latest version of IRSS (build 3598). I had been using the MP control plugin to exit mediaportal...
I recently upgraded to RC3 and the latest version of IRSS (build 3598). I had been using the MP control plugin to exit mediaportal...
Spragleknas or Disaster can you help me !
with this version i can't use my remote !
PLEASE !!!
Spragleknas or Disaster can you help me !
with this version i can't use my remote !
PLEASE !!!
hi,
i have tested this version with my hardware and not work :
Hard : antec veris elite VFD fw : 0x44 and rm200
IR work in...
Hey - this is an old thread but figured I'd upload my foxtel IR commands incase anyone ever needed em :) (good deed for the decade!)
BTW IR Server Suite - Test Build 1.4.2.3158 is the best version I've found :)
Hey - this is an old thread but figured I'd upload my foxtel IR commands incase anyone ever needed em :) (good deed for the...
Hi Everyone,
First time MP'er, and almost got to the perfect system running. I have a hybrid card receiving DVB-T & Foxtel...
I've not had any luck getting this working. Has anybody managed to get a KWorld device working with something other than MCE or TIVMe (their own software). Im sure the remote software could support it but they are relucatant to allow you to control any app.
I have to KWorld DVB PC160-2T. The drivers are the same for the 399U usb...
I've not had any luck getting this working. Has anybody managed to get a KWorld device working with something other than MCE or...
has anybody managed to get the remote from a KWorld card working with IRSS? This is my card and the remote software...
Thanks, works great for me in RC3.. :thx:
Thanks, works great for me in RC3.. :thx:
Any chance of a re-compile for RC3... Would be nice not having to over write MPConfig.config files and all that jazz.. Thanks
UP!
UP!
Hi everybody,
I have a problem with Translator for IR Server suite.
The IR code learned in translator appears as two digits...
Seems like I'm the only one using this plugin but anyway, here's a fix for the problem. There are still two problems with this plugin that I didn't solve (yet) since they don't have any negative influence on the functionality: no blue3wide support, and the plugin icons aren't shown in the Settings/Plugins list.
I think the problem...
Seems like I'm the only one using this plugin but anyway, here's a fix for the problem. There are still two problems with this...
I just installed IR Server Suite Test Build 1.4.2.3496 (the latest version) and cannot get the Config window of the "MP Blast Zone...
Just off the top of my head: Windows handles messages to services and to windows differently. Different versions of Windows also behave differently in this respect. By design Vista and Win7 are fussy about what messages are delivered to services. The restriction also applies to windows created by service plugins, such as the Windows...
Just off the top of my head: Windows handles messages to services and to windows differently. Different versions of Windows also...
Hi all,
I am trying to get IRSS to receive windows messages using the built in "WM Receiver for IR Server" window. Not having...
Why ?
when i test the mapping button on MPcontrolPlugin - IR Key are recognized, but i don't have any event in MP ! i don't undertand
Why ?
when i test the mapping button on MPcontrolPlugin - IR Key are recognized, but i don't have any event in MP ! i don't undertand
hello
I use IRSS v.3496 and minidisplay, when I run MP minidisplay works correctly, but disables the server IRSS, I have to...