Newcomers Forum (305 Viewers)

Newcomers to MediaPortal may start here with their questions
MP1 MP2 help! (1 Viewer) DE
Hello and welcome Libby! :) This is really the wrong place for this thread. Briefly: I suspect you're trying to install MediaPortal 2. I'd advise to go with MediaPortal 1. Newer is not always better. In this case, MP2 is a work in progress; MP1 is mature and stable. There's nothing wrong with MP1. Regards, mm
Hello and welcome Libby! :) This is really the wrong place for this thread. Briefly: I suspect you're trying to install...
I wanted to change from Media Center to Mediaportal but can not get even to install! I get a message that you have to intall...
Replies
1
Views
1K
No problem. :) Don't hesitate to ask if you have any further questions. We like to be helpful! :)
No problem. :) Don't hesitate to ask if you have any further questions. We like to be helpful! :)
I am trying to get ready to replace all my WMC computers. I ran in to my first road block, When I run TV Server Config all seams tp...
Replies
3
Views
1K
The wiki exists for questions like this. ;) http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/14_Using_MediaPortal/3_TV/Keyboard_Shortcuts_-_TV F7 and F8. You can change them around if you don't like them.
The wiki exists for questions like this. ;)...
Got this all up and running on Win10, but doesn't seem to find SBS in the scanning? Plus, Does MP have a smaller window feature? I...
Replies
4
Views
1K
Hello all, newbie here so excuse the Q's. Recently upgraded to win 10 and Loving it so far - apart from the demise of WMC. On the upside - I've installed and (mostly) have Mediaportal working. Great program, great support and easy to follow setup instructions - hence the 'thanks' - so....thanks. Now the inevitable silly quastion...
Hello all, newbie here so excuse the Q's. Recently upgraded to win 10 and Loving it so far - apart from the demise of WMC. On the...
Hello all, newbie here so excuse the Q's. Recently upgraded to win 10 and Loving it so far - apart from the demise of WMC. On the...
Replies
0
Views
977
O.K. The system found some channels but I have 3 problems. I am not a computer specialist, I am not a MediaPortal specialist and I do not understand english quite well. So, it is not easy to get MediaPortal functioning. WMC was more easier. But enclosed you will find the logbook.I forgot to mention that my computer got a BSOD (new...
O.K. The system found some channels but I have 3 problems. I am not a computer specialist, I am not a MediaPortal specialist and I...
Hallo, Since Windows 10 it is not possible to use WMC anymore so I planned to move to MediaPortal, In the past, with Windows 8.1, I...
Replies
4
Views
1K
Never mind. I was able to find the code by searching to find which channel had the listing that matched my channel. Then I saw the pattern: Channel 18.1 = WCCB Channel 18.2 = WCCBDT2 Channel 18.3 = WCCBDT3 (this is Me TV where I live) Hope this helps someone else.
Never mind. I was able to find the code by searching to find which channel had the listing that matched my channel. Then I saw the...
I am trying to setup MediaPortal for the first time. I have webEPG configured for many channels, but I am having trouble with one...
Replies
3
Views
2K
Turns out that disabling 14:9 zoom did not work for TV. ViewModeSwitcher sounds promising, I'll give that a go.yep, that did the trick. thanks!
Turns out that disabling 14:9 zoom did not work for TV. ViewModeSwitcher sounds promising, I'll give that a go.yep, that did the...
Hi guys, I'm having a weird issue with DVD playback. I saw a similar issue with TV but I seem to have resolved that. Letterbox...
Replies
2
Views
2K
MP1 MP2 [solved] Basic Newbie Questions (2 Viewers) DE
Thank you very much indeed for such a comprehensive (and friendly!) reply. I'm looking at the Wiki now - and also deciding what computer to build for a media server... thinking Intel NUC. S :)
Thank you very much indeed for such a comprehensive (and friendly!) reply. I'm looking at the Wiki now - and also deciding what...
Hello, After hearing of the demise of Windows Media Center, and researching possible replacements, I think I've gone for Media...
Replies
2
Views
2K
MP1 MP2 Microsoft legacy EPG still working? (1 Viewer) DE
It's even stranger this time. Rovi sometimes spells the same show differently. Even on the same channel. Sometimes they replace a capital letter with a lowercase letter. Which means series recordings are missed. Only fix is the make 2 seperate series recordings. Here is an example:
It's even stranger this time. Rovi sometimes spells the same show differently. Even on the same channel. Sometimes they replace a...
I am in USA and have been using Ms Legacy for xmltv EPG. The other day I noticed the guide data only to July 24. Now no data is...
Replies
4
Views
3K
Hello, I'm not truly a newcomer, as I was an avid user a couple years ago, but had switched (reluctantly) to WMC for the captions feature. Upon learning that MP now has CC support in 1.12 for CableCARD I immediately have returned! Thanks for adding this! Everything is working great, and I'm in the middle of setting the whole of MP...
Hello, I'm not truly a newcomer, as I was an avid user a couple years ago, but had switched (reluctantly) to WMC for the captions...
Hello, I'm not truly a newcomer, as I was an avid user a couple years ago, but had switched (reluctantly) to WMC for the captions...
Replies
0
Views
949
Paul9 - I was using MP between 2008 and I suppose about 2011 (I don't remember) and I was able to get the ISDB-T tuner I had working properly, and then pretty well moved on to another setup (Plex Media Server, with the Plex Client running on a Samsung Smart TV without TV). Along the way, I tried Mythbuntu and various other TV...
Paul9 - I was using MP between 2008 and I suppose about 2011 (I don't remember) and I was able to get the ISDB-T tuner I had...
I moved to Brazil where the TV broadcast standard is SBTVD (ISDB-T - similar to Japanese TV). Back in 2006 Terratec.de told me...
Replies
9
Views
10K
That was it! Thank you both! I trimmed out all but the HD channels that I actually expect to use. It is a much smaller list and it populated the TV guide properly. I just recorded and played my first show. Now to set up the other clients and test everything.
That was it! Thank you both! I trimmed out all but the HD channels that I actually expect to use. It is a much smaller list and it...
I am a newcomer and am stuck on the WebEPG grabber. I added my channels and they show in the mapping except most have no entry in...
Replies
5
Views
2K
MP1 MP2 Back after 9 years or so... (1 Viewer) DE
Well, if you are like me and moving to win 10, there is no other choice! I have said that win 10 has done me a favour in that MP is so much better than WMC....
Well, if you are like me and moving to win 10, there is no other choice! I have said that win 10 has done me a favour in that MP...
I left MP way back in 2006 for WMC - at the time WMC was more stable - but with recent changes to and then then killing of WMC by...
Replies
1
Views
738
Thanks Ron I am a old TV user (literally), Just a new one to MP. I have only OTA TV all my life and as long as they don't do away with OTA I keep it that way.:) I watch mostly OTA 5.1, 2, 12.1, 2, 25.1, 2, 29.1, 34,1, 2, 3 and 42.1, 2, 3, 4. I also get OTA stations I deleted, about 34 in total but keep only 17. I am glad for MP...
Thanks Ron I am a old TV user (literally), Just a new one to MP. I have only OTA TV all my life and as long as they don't do away...
Useing Windows 7 64 in US for OTA TV. I am trying to set up the EPG with XMLTV. When running MC2XML only legacy Microsoft gets any...
Replies
12
Views
4K
I just found this: http://answers.microsoft.com/en-us/windows/forum/windows_8-system/kernel-security-check-failure-when-scanning/9f7d10d9-767a-441e-a789-3e3251a40641?auth=1 and a ton of other TV card related blue screens with this term "kernel security check failure" "TV card" on Bing. (yes Bing :love: )
I just found this...
Hi there guys, I have ahad an eventful few days, but lets just say I now have a new computer but each time I go to set up the TV...
Replies
1
Views
949
That may be part of the answer. WMC is not using the LAV CODEC. WMC is probably using a different CODEC for the AC3 in the MP TS than it is for the WMC files. Whatever AC3 CODEC WMC is using does have trouble controlling audio volume over HDMI. I have not tried controlling the volume out an analogue connector. Thanks.
That may be part of the answer. WMC is not using the LAV CODEC. WMC is probably using a different CODEC for the AC3 in the MP TS...
Hi, I have tried 3-4 times now to setup Media Portal as an alternative to Windows Media Centre without 100% satisfaction. Could I...
Replies
65
Views
20K
When I went to manually change the name of channel 7.3 from WXYZ-LW to WXYZ-LF I found it was already sending guide info for WXYZ-LF. I did as you said and manually changed the editable channel name to WXYZ-LF. I reported a couple other channel lineup changes to Schedules Direct and they should fix them fairly quickly. I really...
When I went to manually change the name of channel 7.3 from WXYZ-LW to WXYZ-LF I found it was already sending guide info for...
I am a total beginner at this, so it is entirely possible I made some basic mistakes. I paid for the Schedules Direct service. My...
Replies
4
Views
2K
I will do it anyway :whistle: Just compare it to MS-Office. You wouldn't start that to just open a txt file, right? That's what notepad is for.
I will do it anyway :whistle: Just compare it to MS-Office. You wouldn't start that to just open a txt file, right? That's what...
I installed MP and all seems well. However, when I use Windows Explorer to navigate to the video I want to watch and then...
Replies
3
Views
1K
Thank you. Per your link I enabled the Dynamic Refresh Rate and the live TV image appeared. Many more things to discover but you got me going. Thanks so much. Steve
Thank you. Per your link I enabled the Dynamic Refresh Rate and the live TV image appeared. Many more things to discover but you...
Hello, I just recently bought a Dell Angel USB TV Tuner, model HJ649. To my great surprise, it came with no software to be...
Replies
9
Views
13K
OK.... seems to be an Nvidia Geforce GT 420M. The machine is an Acer laptop, i5 CPU with 4GB of RAM.OK - weird... my apologies for wasting your time... I just downloaded Direct again and reinstalled it... apparently last time hadn't worked! So I was being stupid then :-(.
OK.... seems to be an Nvidia Geforce GT 420M. The machine is an Acer laptop, i5 CPU with 4GB of RAM.OK - weird... my apologies for...
Completely new to MP... downloaded the MP2 Summer '15 edition.... tried to install... tells me DirectX 9.0C is not installed. Went...
Replies
2
Views
2K
MP1 MP2 Newcomer has questions/issues (1 Viewer) DE
Hello again Anthony Yes, I acknowledge the IMDB source does take a fair amount of effort to setup. Other sources are a bit easier. :) The reasoning for this has been explained previously. From TV Server's perspective the guide data is just guide data (ie. program start times, titles etc.). Yes, in this case there are channel names...
Hello again Anthony Yes, I acknowledge the IMDB source does take a fair amount of effort to setup. Other sources are a bit easier...
I currently use SageTV which i find excellent, but I need a replacement for several friends currently using MC and possibly myself...
Replies
12
Views
4K
MP1 MP2 Can't play movies DE
Hi and welcome. Usually there are missing prerequisites. Please check the news on our homepage, they point to the important wiki page. You need to install the listed VC redistributables as x86 versions.
Hi and welcome. Usually there are missing prerequisites. Please check the news on our homepage, they point to the important wiki...
I'm a new user switching from WMC. I've installed MediaPortal2 Summer '15. I've added a folder containing all my movies as a...
Replies
1
Views
1K
I get your point. But with my system the way it is I don't have the benefit of an HTPC (be it merely software) experience. Now you are talking about remote control (be it just wireless keyboard and mouse), video feed from the host machine to the TV, etc. To be honest, I have yet to come across a media format that my LG doesn't...
I get your point. But with my system the way it is I don't have the benefit of an HTPC (be it merely software) experience. Now you...
All my ripped DVDs are MKV because MakeMKV is by far the easiest way to do this. WMP cannot be taught to stream MKVs. All I want to...
Replies
8
Views
2K
I recognized our test file :) I can't test my self now since my home pc is constantly failng probably due to overheating
I recognized our test file :) I can't test my self now since my home pc is constantly failng probably due to overheating
Have got an issue playing MKV with 3 different audio tracks in separate AC3 files (in the same folder as MKV). Can not change...
Replies
15
Views
9K
TV working. Now just need to get the remote working. Thanks
TV working. Now just need to get the remote working. Thanks
Trying to make the switch from WMC to MP since WMC is going away in windows 10. Followed the setup instructions. Used MC2XML and...
Replies
4
Views
2K
Can't be sure but could you try a UNC path without a space character in it (no expert in the videos, but's a common problem with UNC handling)
Can't be sure but could you try a UNC path without a space character in it (no expert in the videos, but's a common problem with...
OK, first up, apologies if this has been answered somewhere already. I did look and couldn't find it. So, I am working to...
Replies
7
Views
2K
Try the TsBufferExtractor plugin.
Try the TsBufferExtractor plugin.
Hello, I'm a long time WMC user who has a couple of systems running in a few households. WMC was good keeping my mother's cable...
Replies
5
Views
3K
Ok, here is the other set of logs....
Ok, here is the other set of logs....
I'm trying to find an alternative to WMC because Microsoft doesn't want to offer it with Windows 10. I've tried Kodi, it is a...
Replies
9
Views
2K
This has rung a bell, and reminded me that I did run WMC and MP concurrently for a little while 3 years ago before making the full switch to MP. From what I remember, I did split the tuners between WMC and MP as suggested by CyberSimian. I disabled the MPTray, and instead opened MediaPortal using a Harmony remote that I had mapped to...
This has rung a bell, and reminded me that I did run WMC and MP concurrently for a little while 3 years ago before making the full...
Hello, I have been a longtime WMC user. I have been mostly happy with the product but as of late it has become apparent that...
Replies
15
Views
4K
Sorry to hear that, but I understand your position. Don't hesitate to ask if you have any further questions.
Sorry to hear that, but I understand your position. Don't hesitate to ask if you have any further questions.
Hi everyone, My cable provider, Cox Communications, has upgraded to all digital, and my Hauppague HVR-1800 is no longer working...
Replies
9
Views
2K
Top Bottom