Run MediaPortal Configuration, Go to "General" and it is a check box that says "Show last active module when starting / resuming from standby"
Run MediaPortal Configuration, Go to "General" and it is a check box that says "Show last active module when starting / resuming...
Hello
Please, tell me , how to disable start from last view in video ? My instalation MP often freeze if I use this option...
So I finally figured out why it wasn't working. The media PC was not set to be in workstation mode. I had to start that up via command line and then everything worked. For future reference:
Start or Stop Workstation service from command line | Windows Command Line Tips
So I finally figured out why it wasn't working. The media PC was not set to be in workstation mode. I had to start that up via...
Like quite a few people, it would seem, I've got my movies on a separate computer and I'm trying to stream them across my home...
The setup for central db is a bit strange when you do it the first time. if you have questions, just ask. :)
The setup for central db is a bit strange when you do it the first time. if you have questions, just ask. :)
Hi, new guy here looking into rolling my own whole house audio/video solution. MP looks to be a really good solution, but I'm...
if you want that muliple folders show up inside one folder then you can use NTFS junctions
Link Shell Extension
https://forum.team-mediaportal.com/mediaportal-1-talk-45/merge-combine-folders-solution-found-27887/#post181875
if you want that muliple folders show up inside one folder then you can use NTFS junctions
Link Shell Extension...
I'ts coming together slowly, but i'm stumped on this. I want to have movies on several different drives, but have them all show up...
Thanks Infinite.loop. I figured this out a little after I made that post. I should have updated my post here confirming that.:)
Thanks Infinite.loop. I figured this out a little after I made that post. I should have updated my post here confirming that.:)
Hi all. I'm new to the forums. I've been learning, implementing and using Media Portal for a couple days now. So far, I really like...
Just run the installer again.
Just run the installer again.
Hi, I had some problems with TV server and so decided to Re install it, Firstly I uninstalled it and now I can,t find how to re...
Same issue here. Although something similar happens with W7MC on my system as well.
ATI Radeon HD 3470 here.
Same issue here. Although something similar happens with W7MC on my system as well.
ATI Radeon HD 3470 here.
I've got MP 1.1.2 running (both tv server and client) on a Win7 PC, using Intel built-in integrated graphics, connected to a 32"...
Thank you so much for your post.
__________________
Watch Unknown Online Free
Thank you so much for your post.
__________________
Watch Unknown Online Free
Hi together,
I just installed a Analog Pinnacle TV Card with an composite connector in my HTPC to be able to see the signal of...
Is any chance for create hotkey button for aktivate my radio station? I have media portal in my living room i my wish is, to press hotkey button and start playing my favorite radio chanell without turn on my LCD.
Is any way with other radio plugin?
Thank for any help.
Mihael, Slovenia
Is any chance for create hotkey button for aktivate my radio station? I have media portal in my living room i my wish is, to...
Is any chance for create hotkey button for aktivate my radio station? I have media portal in my living room i my wish is, to...
I have a strange problem and i hope someone can help me with this.
Original dvd rips plays fine no probs what so ever but..........
Most dvd's i watch have custom build subtitles by thirt party's and those subs does not work.....i can select them but they don't appear.
I'm forced to watch those dvd's with vlc player, this player...
I have a strange problem and i hope someone can help me with this.
Original dvd rips plays fine no probs what so ever...
I have a strange problem and i hope someone can help me with this.
Original dvd rips plays fine no probs what so ever...
Either use english as post language, or ask zou question on russian forum Team-MediaPortal -
Это -англоязычный форум. Или переформулируйте вопрос на английском, или задайте вопрос на русском форуме Team-MediaPortal -
Either use english as post language, or ask zou question on russian forum Team-MediaPortal -
Это -англоязычный форум. Или...
Не происходит поиск каналов в TVserver? при попытке сканирования говорит: "please install a supported audio/video encoder for your...
OMG i fixed it!!!
Last month my 3 year old rammed somethign into the DVD drive and it doesn't work.
With my DVD drive closed MP takes 3 minutes to load, with it open it takes about 3 seconds
OMG i fixed it!!!
Last month my 3 year old rammed somethign into the DVD drive and it doesn't work.
With my DVD drive closed...
I've done a complete uninstall and reinstall and I'm still experiencing extremely slow loading of both Mediaportal and the...
You might want to install the IFC (Intelligent Frame Correction) plugin too - it'll try to resize the video to the correct frame size automatically...
Look for it in the download repository
:D
You might want to install the IFC (Intelligent Frame Correction) plugin too - it'll try to resize the video to the correct frame...
As a newby, I not sure I know where to find the support features for upscaling standard dvds.
Is this done automatically during...
Have a look at the very bottom of this thread, there are links to similar threads about Server 2008 R2, yes it can be installed, and there are guys that will help if you have problems.
As for DLNA, as JoeSmith said, MP doesn't do DLNA.
Have a look at the very bottom of this thread, there are links to similar threads about Server 2008 R2, yes it can be installed...
Hi folks,
I'm trying to find a windows based DLNA service, so I can watch mkv's on my Samsung TV, apple iPad/iPhone and other...
I had done the test and found that is not related to the CPU speed.
And the problem which leading the mis match the sound and video, mainly due to the Vidoe and Audio decoder mismatch
I had change the H264 codec to PDVD10. and the Bluray version BBC life is run perfectly at my ATOM330.
For watching live TV boardcast. That...
I had done the test and found that is not related to the CPU speed.
And the problem which leading the mis match the sound and...
Searched the forum, but couldn't find the exact answer.
I have a Asus P5QL Pro Mobo with 4 GB memory, Ati HD3870 (512 MB) and a...
Apologies as cannot find any solution in wiki,etc and I am new to the portal. I have the following MCE remote control from Maplins:
Media Centre IR Remote : PresentersPC Remotes : Maplin
I believe it is source form these guys:
ORtek Products -
I am running windows 7 ultimate and mediaportal 1.1.2.0 with streamedMP skin. I...
Apologies as cannot find any solution in wiki,etc and I am new to the portal. I have the following MCE remote control from Maplins...
Apologies as cannot find any solution in wiki,etc and I am new to the portal. I have the following MCE remote control from Maplins...
My scenario:
I currently have an HTPC with a Hauppage 2250 TV card. I watch and record Live TV using Windows Media Center. The live TV shows that I record are mainly for my wife. I have another HTPC setup in another room where she can watch her recorded shows using either WMC or WMP.
Lately, one of my co-workers has been...
My scenario:
I currently have an HTPC with a Hauppage 2250 TV card. I watch and record Live TV using Windows Media Center. The...
My scenario:
I currently have an HTPC with a Hauppage 2250 TV card. I watch and record Live TV using Windows Media Center. The...
You're absolutely correct.
I rebooted to make sure Presto started first, and the digital radio works. In hindsight it was obvious, and I should have tried that before posting.
The comment about the drivers being removed was because I saw a screen during the installation. It said something about obsolete drivers (or some similar...
You're absolutely correct.
I rebooted to make sure Presto started first, and the digital radio works. In hindsight it was...
Hi. I couldn't find anything obvious using search.
I installed Presto onto an XP SP3 system with an EASYCAP USB DVB-T / DAB+...
I've been tinkering with this but without success. Instead I found a compromise. I've reduced my screen resolution so my 1080p films now play at 720p. I found that when MP is windowed the files play ok but gradually get worse as I enlarge the window.
I've been tinkering with this but without success. Instead I found a compromise. I've reduced my screen resolution so my 1080p...
Hello
I'm having some playback problems with video files - all sorts of stuff divx, xvid, x264 etc in container formats avi or...
See MEDIAPORTAL - Requirements and https://forum.team-mediaportal.com/installation-configuration-support-53/how-install-mediaportal-windows-2008-r2-x64-only-81774/
Tony
See MEDIAPORTAL - Requirements and...
First off
Hello all
as i am new and looking into Media Servers etc etc i m here to ask a question, which is as follows
I...
Hi there,
Direct connection (hdmi, dvi, VGA, etc) only, it does not support streaming to extenders or network players
Thanks
J.
Hi there,
Direct connection (hdmi, dvi, VGA, etc) only, it does not support streaming to extenders or network players
Thanks
J.
i have installed mediaportal on my pc and configured it but when i go to my wdtv live (i have not tried the ps3 yet) in network...
once again thank you. just doing a quick scan this seems to be the "ticket".
once again thank you. just doing a quick scan this seems to be the "ticket".
from what i have read this appears to be the media center i have been looking for. i am primarily interested in the plugins...
Hi :)
I moved your post out of the fanarthandler thread since I do not see relevance there.
See here:
My Films - MediaPortal Forum
Hi :)
I moved your post out of the fanarthandler thread since I do not see relevance there.
See here:
My Films - MediaPortal Forum
Hi, where do I get the My Films Plugin? Thanks!
I installed MediaPortal 1.1 Server and Client on a Windows XP Professional computer with a Hauppauge HVR 1600 tuner about 6 months ago and everything was working the way I needed -- especially the Server. I connected the cable company's connection directly into the HVR 1600's analog tuner.
Then our cable company sent out Thomson...
I installed MediaPortal 1.1 Server and Client on a Windows XP Professional computer with a Hauppauge HVR 1600 tuner about 6 months...
I installed MediaPortal 1.1 Server and Client on a Windows XP Professional computer with a Hauppauge HVR 1600 tuner about 6 months...
Windows 7 (Home Premium and higher)
Excellent built in H.264/MPEG2 codecs
Full DXVA2 hardware acceleration
EVR Render
Many many other things
Windows 7 (Home Premium and higher)
Excellent built in H.264/MPEG2 codecs
Full DXVA2 hardware acceleration
EVR Render
Many...
First I want to that all the people involved in the development and support of MP. My experience so far has been mostly hassle...
Unfortunately there is indeed no other supported way with MP.
Unfortunately there is indeed no other supported way with MP.
I've got an Anysee E30 C (DVB-C) USB decoder. I recently got my program card.
The sw (Anysee Viewer) included with the decoder...
This is for Vista but should be the same in Windows 7:
How to open an elevated Command Prompt in Windows Vista
This is for Vista but should be the same in Windows 7:
How to open an elevated Command Prompt in Windows Vista
Hi this is my first post so be nice :)
Having run MCE for a while, as i had a hard drive fail, I'm trying MP.
I'm working my...
Does MediaPortal support upscaling of standard dvds to near HD quality during playback?
Does MediaPortal support upscaling of standard dvds to near HD quality during playback?
Does MediaPortal support upscaling of standard dvds to near HD quality during playback?
Wicked, all working now!
Changed to MHEG5, but was throwing up errors in scan, deleted 538000 freq from scan and all good!
Now my wife will have to find something else to nag me about...:thx:
Wicked, all working now!
Changed to MHEG5, but was throwing up errors in scan, deleted 538000 freq from scan and all good!
Now...
I have just installed RC4 everything is working sweet as apart from the EPG guide.... How do you import the tv guide? I have tried...
Did you try this one: https://forum.team-mediaportal.com/tv-server-plugins-294/powerscheduler-version-1-2-0-10-rc1-87446/
Did you try this one: https://forum.team-mediaportal.com/tv-server-plugins-294/powerscheduler-version-1-2-0-10-rc1-87446/
Hello forum,
I am trying to configure my HTPC (running MP 1.1.2 client+server with a Terratec Cinergy S2 (PCI) + CI module) to...
