Problems with the TV-Server or MyTV frontend? Post them in here.
Hello,
thanx for a reply. I finally gave up the motor solution. 2 dishes are also impossible in my case, don't have enough space. So finally I decided to use 2 LNB's for 1 dish (multifocus) and a Diseqc switch. The channel switching is much faster then, compared to the motor solution. I just hope the signal quality will be good...
Hello,
thanx for a reply. I finally gave up the motor solution. 2 dishes are also impossible in my case, don't have enough...
Hi there,
I'm quite a newbie to HTPC, currently planning to build one.
My question is maybe dull, but I need to know in order...
It works !
Thank you very much.
:thx:
It works !
Thank you very much.
:thx:
TV-Server Version: TV0.3, version of 15-11-2007
MediaPortal Version: SVN of 15-11-2007
MediaPortal Skin: BlueTwo Wide
Windows...
Ah well... big thanks! seems i wasn't searchin deep enough :ooops: those are some excellent ideas!
Yet i'm unsure if it would work for me, for i would like to depend hibernating of Server on accessing the server in any way over the network. That could be VNC-connection or even simple file-transfer when the server shouldn't...
Ah well... big thanks! seems i wasn't searchin deep enough :ooops: those are some excellent ideas!
Yet i'm unsure if it would...
Hello All!
After finally being able to run TVE3 stable, i now try to get it configuerd. at the moment i try to set up the...
ok, thanx
ok, thanx
MediaPortal Version: SVN Build 12919 (10.02.2007 / 13:43 CET) + tvengine3-02-12-2007--20-13h--Rev12949
MediaPortal Skin: BlueTwo...
2007-11-19 18:36:21.828125 [5]: RemoteControl: Error getting server Instance - Requested Service not found
that just started coming up..anyone know what thaty means?
this come up once i enabled extended logging
ok guys
thanks for your help..
i just figured my problem...and i feel really stupid
didnt tick the bocx to enable the...
2007-11-19 18:36:21.828125 [5]: RemoteControl: Error getting server Instance - Requested Service not found
that just started...
TV-Server Version: 0.3
MediaPortal Version: 2.3.0
MediaPortal Skin:
Windows Version: Windows Media Center 2005
CPU Type: Intel...
i have tried older version of tv-server as suggested in other forums but this doesn't seem to help, it there is no solution i was wondering on what combinations of dual tuners do work
can someone please help i was realy looking forward to being able to watch TV anywhere in my house
i have tried older version of tv-server as suggested in other forums but this doesn't seem to help, it there is no solution i was...
TV-Server Version: 11-14-2007--01-38h--Rev16524
MediaPortal Version: 0.2.3.0 RC3
MediaPortal Skin: blue wide
Windows...
I have installed the latest driver from Silicondust and TVServer sees both tuners. Playing with the codecs gets it working (no more black screen.)
The main issue I have now is, that a good number of channels just don't work when in MP.
Changing channels in MP is kind of slow, but more importantly, it goes through a number of...
I have installed the latest driver from Silicondust and TVServer sees both tuners. Playing with the codecs gets it working (no more...
TV-Server Version: Revision 16392
MediaPortal Version: 0.2.3.0 RC3/SVN
MediaPortal Skin: Foofaraw with MePo Icons
Windows Version...
I get the same exception. Anybody knows what should be the reason? In general the PowerSchedulerClient plugin should be running so what configuration setting is responsible for this?
I get the same exception. Anybody knows what should be the reason? In general the PowerSchedulerClient plugin should be running so...
Hi all,
I updated to the latest svn, but unfortunately powerscheduler is not working any more, the log tells me:
2007-09-03...
Hi!
I've tried to schedule recordings of radio webstreams but I can not get it to work. I've succesfully managed to import EPG for some radio channels but I can not make it record.
In SVN 16281 gemx mentioned "Recording of webstreams is coming next". Any news on this?
/Peter
Hi!
I've tried to schedule recordings of radio webstreams but I can not get it to work. I've succesfully managed to import EPG...
Hi!
I've tried to schedule recordings of radio webstreams but I can not get it to work. I've succesfully managed to import EPG...
I'm using a WinTV Nova-S, and interestingly enough, I have the same problem. Scanning a satellite in TV Server yields no channels, while running the same scan using the standard mediaportal 0.2.3 interface works fine.
I can get a signal using ProgDVB, DVB Dream, or the Mediaportal default interface, just not TV Server. I realize...
I'm using a WinTV Nova-S, and interestingly enough, I have the same problem. Scanning a satellite in TV Server yields no channels...
TV-Server Version: tvengine3-11-08-2007--14-58h--Rev16481
MediaPortal Version: MediaPortal-svn--11-08-2007--17-13-Rev16484...
TV-Server Version: RC2.3
MediaPortal Version: RC2.3
MediaPortal Skin: Blue Two Wide
Windows Version: Xp SP2
CPU Type: AMD Sempron
Memory: 1GByte
Motherboard: Asus M2A-VM HDMI
1. TV Card: Hauppauge WinTV PVR250
1. TV Card Type: Analogue
1. TV Card Driver: Latest
2. TV Card: Happauge Nova-DT Dual DVB-T Tuner (This is the one that goes...
TV-Server Version: RC2.3
MediaPortal Version: RC2.3
MediaPortal Skin: Blue Two Wide
Windows Version: Xp SP2
CPU Type: AMD Sempron...
TV-Server Version: RC2.3
MediaPortal Version: RC2.3
MediaPortal Skin: Blue Two Wide
Windows Version: Xp SP2
CPU Type: AMD Sempron...
You can get it here:
http://www.downloadsource.net/d5489/MediaPortal-GetFile/
But that's Not the TVE3 version, that's the regular one.
--Alan
You can get it here:
http://www.downloadsource.net/d5489/MediaPortal-GetFile/
But that's Not the TVE3 version, that's the regular...
TV-Server Version: TVEngine3 Snapshot: 09-29-2007 01-06h Revision 16065
MediaPortal Version: MediaPortal 0.2.3.0 RC2 +...
tourettes,
I'm now running 16525 and the black screen issue is resolved.
Thanks.
More importantly, I did another test on my remote MediaPortal client using TsReader and for the first time that I can recall MP did not crash. In fact it is now running great.
tourettes,
I'm now running 16525 and the black screen issue is resolved.
Thanks.
More importantly, I did another test on my...
Hello,
I've some problems with tswriter from 04/11/2007.
When i view (from SetupTV or from the TVClient - single seat) any...
Hello,
I'm pretty new to MediaPortal as I'm just transitioning from a competitor, which i've been using for about 6 years. My setup is that I have a TVEngine 3 server, with an MCE500 (Dual Tuner) which is connected to 2 Dish Network decoders. Each decoder has an IR Blaster and I'm using the IRServer plugin to change the channel...
Hello,
I'm pretty new to MediaPortal as I'm just transitioning from a competitor, which i've been using for about 6 years. My...
Hello,
I'm pretty new to MediaPortal as I'm just transitioning from a competitor, which i've been using for about 6 years. My...
I had the same problem. Turning on the SQL browser solved it for me. Just before I also turned off the firewall. Doesn't know yet if I can turn it on again.
/Ingvar
I had the same problem. Turning on the SQL browser solved it for me. Just before I also turned off the firewall. Doesn't know yet...
Hello,
I'm having some trouble with the latest TVEngine (downloaded yeasterdays build).
The version of Media Portal is RC3 with...
Please consider this thread closed! I have moved my question here.!!
https://forum.team-mediaportal.com/atsc_card_owners_come_here_support-t5231.html
Please consider this thread closed! I have moved my question here...
TV-Server Version: Rev 16504
MediaPortal Version: 0.2.3 RC3
MediaPortal Skin: Blue Two Wide
Windows Version: Vista Business
CPU...
hello
thank you for ur advice, will try it out tonight.
cheers
hello
thank you for ur advice, will try it out tonight.
cheers
Hello
I downloaded the following:
tvengine3-10-27-2007--02-04h--Rev16369
MediaPortal_0.2.3.0_RC3_Setup (applied SVN 16485)...
I think it means that it will only work when the card receives an FTA signal, and not at all otherwise
I think it means that it will only work when the card receives an FTA signal, and not at all otherwise
hello,
i want to make a TV-Server, and some clients which will be can see different channels on TV.
I want to buy a Skystar2...
Was a solution ever found to this?
I know on my system now, if I put the usetswriter.txt file in c:\ to use tswriter, I acn see my qam/atsc channels when timeshifting, but tswriter seems very buggy and causes all sorts of jumpiness and freezing.
Is there a solution without tswriter yet?
My current workaround is to choose to...
Was a solution ever found to this?
I know on my system now, if I put the usetswriter.txt file in c:\ to use tswriter, I acn see...
I'm using a single seat install of TVE3, with MP-SVN all from 5/2. I'm able to scan for and find all channels with TVE3 via my...
Thanks!
Thanks Trevor!
I was just about to give up on Media Portal and re-install MythTV.
--Joe
:thx:
Thanks!
Thanks Trevor!
I was just about to give up on Media Portal and re-install MythTV.
--Joe
:thx:
I have two Haupauge 150's connected to DirecTv Tuner Boxes. I have been looking at the instructions, setup, and forums all night...
the only reason why i tried the tv server was that the "normal" MP doesn't have the subchannel function for PR****M portal direct. This would be a nice feature in MP directly.
So i installed the server (according to the wiki) and it looked like it would work proper.
But after a while i recognized these (bugs?):
1. i watch tv and zap...
the only reason why i tried the tv server was that the "normal" MP doesn't have the subchannel function for PR****M portal direct...
the only reason why i tried the tv server was that the "normal" MP doesn't have the subchannel function for PR****M portal direct...
I have this problem too. First installed media portal, everything works (well - some things not good, but anyway) Installed tv server, according to wiki, but first time I entered My TV I expected to add some stuff for the server, but no - looked the same as before. (Maybe this is correct when running client and server on same pc?)...
I have this problem too. First installed media portal, everything works (well - some things not good, but anyway) Installed tv...
TV-Server Version: last SVN
MediaPortal Version: last SVN
MediaPortal Skin: XFACE
Windows Version: XP SP2
CPU Type: AMD Athlon...
Earlier in my try-outs with MP I "always" got the message that looked something like: "Cannot begin timeshifting, no audiovideo detected".
In consequense of this I set the min and max number of timeshiftfiles to zero in setup to try getting on from there and "mess around" inside MP :) This should apparently prove to BE a WRONG MODUS...
Earlier in my try-outs with MP I "always" got the message that looked something like: "Cannot begin timeshifting, no audiovideo...
TV-Server Version: 1.0.0.16434
MediaPortal Version: 0.2.2.9993 SVN 16429
MediaPortal Skin:
Windows Version: XP MCE 2005 SP2...
I made a mistake and used an old (pre-RC3) SVN of MP. Now it works.
/Peter:sorry:
I made a mistake and used an old (pre-RC3) SVN of MP. Now it works.
/Peter:sorry:
TV-Server Version: TV3 + SVN
MediaPortal Version: 0.2.3.0 RC2 + SVN
MediaPortal Skin: Project Mayhem III
Windows Version: XP...
dude I wouldnt worry about this post as its old..... Also didnt the dev team say no x64 support anyway?? :)
dude I wouldnt worry about this post as its old..... Also didnt the dev team say no x64 support anyway?? :)
MediaPortal Version: 0.2.2.0
MediaPortal Skin: Standard
Windows Version: Vista x64 Enterprise (with all updates)
CPU Type: AMD...
Maybe it was sunny in Carisbrooke, but I'm now living in the big smoke and its peeing it down up here...
Anyway, have you read the new thread about black screens on certain channels? It sounds like its a propper bug. I'm going to keep an eye on that one.
Take care, and enjoy Island life!
Maybe it was sunny in Carisbrooke, but I'm now living in the big smoke and its peeing it down up here...
Anyway, have you read...
I've been stupid. Two of my channels stopped working so I tried re-scanning to see if that helped. It didn't, so I deleted the...
Please disreguard. This is in the wrong forum.
Please disreguard. This is in the wrong forum.
Please disreguard. This is in the wrong forum.
kin ell .. using the mp test tool, cleared the logs, started the TV Server and it starts up now and conencts to the db .. maybe the last reboot sorted it .. I just love issues like this :/
Cheers all, looks like it has been cracked .. probably the UAC was the main contributor ..
Thanks
MarkT
kin ell .. using the mp test tool, cleared the logs, started the TV Server and it starts up now and conencts to the db .. maybe the...
TV-Server Version: Various, from current to back over the past few months
MediaPortal Version: latest
MediaPortal Skin: default...
Make sure you don't have EVR selected in the Mediaportal config. This can cause the problem you describe
Make sure you don't have EVR selected in the Mediaportal config. This can cause the problem you describe
TV-Server Version: None
MediaPortal Version: 0.2.3.0 RC3/SVN
MediaPortal Skin: Monochrome
Windows Version: Vista Ultimate
CPU...
Top Man Erbsenkopp!!
Nailed my problem in one hit, Thanks!!
Win
Top Man Erbsenkopp!!
Nailed my problem in one hit, Thanks!!
Win
Hello again. Making good progress but hit another stumbling block - this time on a second PC trying to use TV Client.
My HTPC...