I had the same problem with MCE 2005. No sound during live tv but the sound worked fine during playback of recorded programs and dvd's etc. I narrowed down the problem to AC3 filter. If you open AC3 filter config from the start menu and select the system tab. Then select "Prefer other decoder" under filter merit. I then restarted...
I had the same problem with MCE 2005. No sound during live tv but the sound worked fine during playback of recorded programs and...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC1 (2005-09-01)
MediaPortal Skin: BlueTwo
Windows Version: Windows MCE...
I have used the Jan 6 RC2 CVS as advised by DMAN for my old S/W BBT8XX card, the only problem i have is when i slick the setup button the only thing in the drop down box is NTSC_M i need PAL I ?
How can i change it?
thanks
-Mortus
I have used the Jan 6 RC2 CVS as advised by DMAN for my old S/W BBT8XX card, the only problem i have is when i slick the setup...
I have used the Jan 6 RC2 CVS as advised by DMAN for my old S/W BBT8XX card, the only problem i have is when i slick the setup...
Oke already found out what the problem was
Seems that the music codec settings have to be set to AC3 after I've changed these settings everything seemed to work.
Now something else is it posible to control the rear,front, center and LFE in mediaportal because now I've the close down media portal to do it
Oke already found out what the problem was
Seems that the music codec settings have to be set to AC3 after I've changed these...
How is it posible when I watch movies or listen music I've full surround sound. But when I watch TV I only have stereo sound.
My...
ah ok...
but here i have found most driver for my remote control...
usb.ini or inf. irda.ini or inf etc...
but now i do not find the topic where i have dowload it...
i must have only win xp prof with sp2 for work my remote?
another way?
ah ok...
but here i have found most driver for my remote control...
usb.ini or inf. irda.ini or inf etc...
but now i do not...
Hi boy, im italian, and i buy the rc model 1039 european version. i have a media portal but win xp do not find the driver for my...
Well, I dont have any tearing since I turned vertical sync on.
Strange thing is that even though I have a Nvidia 6600GT card, Dscaler is
giving better quality than Nvidia purevideo on my maschine.
Nvidia codec doesnt fill the tv-screen. I have a black bar on the left side.
And on both Nvidia and dscaler there is an almost...
Well, I dont have any tearing since I turned vertical sync on.
Strange thing is that even though I have a Nvidia 6600GT card...
I want to use the Dscaler5 codec for watching Dvb tv in media portal. I have set everything up and the quality is amazing, i much...
ctonning, please post the log especially have a look into error.log, you must/should see something. But as Taipan said, please fill out the support form to assist you.
ctonning, please post the log especially have a look into error.log, you must/should see something. But as Taipan said, please fill...
when scheduling a recording with tvguide, once it starts, i cant stop the recording. Mp continues until the harddisk is full. Cant...
The audio works for me in movies with FFdshow from Dec 12, 2005. I can't enable LFE though, it stops DVD audio. It's no biggie though, my sound card does the crossover.
The audio works for me in movies with FFdshow from Dec 12, 2005. I can't enable LFE though, it stops DVD audio. It's no biggie...
I am trying to normalize my movies' sound and ffdshow supports normalization (and winamp plugins, which is what I'm going to use)...
Absolute minimum I suppose, switch the gf4mx for a 5200 and get another 256mb of ram (another 512mb would be better).
Providing that capture card is hardware (cant find a thing about it), it should work acceptably. Obviously the cpu being too slow, timeshifting may not work but it should pass otherwise.
Absolute minimum I suppose, switch the gf4mx for a 5200 and get another 256mb of ram (another 512mb would be better).
Providing...
Hi,
I have the following system:
Video Codec: Mpeg2Dec Filter
CPU Type: Intel Pentium III - 930MHz
Memory: 255 MB...
Hi,
If you are going to edit the database manually you need to fill 5 tables (movie, movieinfo, path, file and actors(only for director)), also if you want u can edit the genre(only once) and genrelink(per movie), in the movieinfo the strTitle is used for the coverart (thats why u can't use this chars in this field * \ / : ? ' )...
Hi,
If you are going to edit the database manually you need to fill 5 tables (movie, movieinfo, path, file and actors(only for...
Hi,
I've read the user manual and Wiki some time ago but coudn't find the solution onto my problem. I have seen that it has...
The MP power scheduler works like this:
You have to select under myTV some broadcasts for recording. When power scheduler is activated it checks if you are in the MP home screen. If so he will shut down the PC after the configured Idle time. The PC will be waked up the configured amount of minutes before the recording will start...
The MP power scheduler works like this:
You have to select under myTV some broadcasts for recording. When power scheduler is...
Hi,
is it possible, to programm MP for Start- ans Stop Time like a Video Recorder? I mean: give in individual, exact Start time...
thanks for the help, i was somehow too stupid to check the capture card tabs where that option is located.
and yeah, i don't mind recordings and buffer beeing at the same place.
thanks for the help, i was somehow too stupid to check the capture card tabs where that option is located.
and yeah, i don't...
hey
well since i registered to post that i too wanted the timeshift buffer "not" to be cleared when zapping i may aswell ask...
well i figured out what the problem is. its a combination of two things. vmr9 with rgb output. rgb out gives me the flash everytime. if i switch to overlay the flash does not occur.
when using a dvi cable, the flash never occurs when using overlay or vmr9. kind of a bummer since i have my tivo using the dvi port. guess my only...
well i figured out what the problem is. its a combination of two things. vmr9 with rgb output. rgb out gives me the flash...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2005-12-16)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
Soory i am a newbie, but serached the forum for this without any luck
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2005-12-16)
MediaPortal Skin: mce
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPEG/AC3/DTS/LPCM Audio Decoder
Video Codec...
Soory i am a newbie, but serached the forum for this without any luck
Area: Media Portal Program
MediaPortal Version: 0.2.0.0...
Soory i am a newbie, but serached the forum for this without any luck
Area: Media Portal Program
MediaPortal Version: 0.2.0.0...
He Marcusb,
Me frustrated, after 5 days of tinkering? :shock:
:)
The problem started with version 1.3, that's why I have downloaded version 2 rc 2.
The people putting this software together deserve the utmost respect.
I would be the last to deny them this respect.
Maybe one day we (I mean the Melbournian MP's)...
He Marcusb,
Me frustrated, after 5 days of tinkering? :shock:
:)
The problem started with version 1.3, that's why I...
Area:Video decoder
MP Version: MP RC 2
Skin: metal
Windows Version: xp home sp 2
CPU Type:Celeron 2.66 GHZ
Memory: 768 mb...
Hi all,
hm... after switching back to my rc1 image I had a little time this weekend, to try out rc2 again. The problem still remains.... I tried several codes, but always the same proplem. I simply get no TV signal at all... (Teletext works fine for the P100 page though).
Help would be appreciated!
Here are the logs...
Hi all,
hm... after switching back to my rc1 image I had a little time this weekend, to try out rc2 again. The problem still...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2005-12-16)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
I sometimes also have this problem but I haven't gotten my install polished up for production yet and haven't thought much about it.
Anyhow, for me, I open the task manager and look for the mediaportal.exe process after a crash and kill the process. I can then start up media portal as per normal again.
I sometimes also have this problem but I haven't gotten my install polished up for production yet and haven't thought much about...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2005-12-28)
MediaPortal Skin: mce
Windows Version: Windows XP (SP2)...
Today I uninstalled MP and deleted the entire MediaPortal folder. After a complete reinstall the problem is gone, I can now play dvr-ms files. I only had the time to try the default settings (I think it's the Mpeg2Dec codec?) on one recorded file but that works fine. Unfortunatly I have to redo all my settings now, though.
I'll...
Today I uninstalled MP and deleted the entire MediaPortal folder. After a complete reinstall the problem is gone, I can now play...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2005-12-16)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
Ditto.
and my Error log shows this (about 80 times):
1/4/2006 1:04:19 AM Planescene(1026,576,1026,576,96256512,True,5):Unhandled exception in Error in the application. Microsoft.DirectX.Direct3D at Microsoft.DirectX.Direct3D.Device.Clear(ClearFlags flags, Int32 color, Single zdepth, Int32 stencil, Rectangle[] regions)...
Ditto.
and my Error log shows this (about 80 times):
1/4/2006 1:04:19 AM...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC1 (2005-09-01)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
MP Version: 0.1.3.0
Windows Version: XP Pro SP 2
CPU Type: Intel Pentium 4 - 3.2 GHz
Memory: 1 GB
Video Card: Nvidia GForce FX 5700
Video Render Type: Overlay
TV Card: Medion (7134) WDM capture
TV Card: E-Tech TV Capture Card
Optional References: X10 Remote Control (Girder + Plugin)
Hi,
I have two S/W TV cards...
MP Version: 0.1.3.0
Windows Version: XP Pro SP 2
CPU Type: Intel Pentium 4 - 3.2 GHz
Memory: 1 GB
Video Card: Nvidia GForce...
MP Version: 0.1.3.0
Windows Version: XP Pro SP 2
CPU Type: Intel Pentium 4 - 3.2 GHz
Memory: 1 GB
Video Card: Nvidia GForce...