Codecs, External Players (11 Viewers)

Post problems with Codecs or External Players here!
Basically what dman is saying... that it's a Software based card... and therefor not supported in MP... that does not mean it will not work. I have that same card and I can get sound just fine. I am using RC2 with todays CVS. I selected Line-in. You will need a small cable running from the audio output on the ATI card to your...
Basically what dman is saying... that it's a Software based card... and therefor not supported in MP... that does not mean it will...
Area: Media Portal Program MediaPortal Version: 0.2.0.0 RC1 (2005-09-01) MediaPortal Skin: Project X Windows Version: Windows XP...
Replies
2
Views
1K
Thanks. It worked like a charm.
Thanks. It worked like a charm.
Any time I'm on the main MyTV page and click "recorded TV," the screen goes solid blue (with the TV shrunk in the lower left). None...
Replies
5
Views
2K
can any one with powerdvd installed please try if they have the same problem clips can be found here... http://www.microsoft.com/windows/windowsmedia/content_provider/film/ContentShowcase.aspx
can any one with powerdvd installed please try if they have the same problem clips can be found here...
Area: Media Portal Program MediaPortal Version: 0.2.0.0 R1C MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2)...
Replies
1
Views
1K
WinTV-PVR 150/500 Driver "pvr_2.0.35.23297_prerelease" fixed my problem of no audio on a few channels. Thank you very much for the help. Now if I can just get MP to burn a DVD, I am golden.
WinTV-PVR 150/500 Driver "pvr_2.0.35.23297_prerelease" fixed my problem of no audio on a few channels. Thank you very much for the...
Area: Media Portal Program MediaPortal Version: 0.2.0.0 RC1 (2005-09-01) MediaPortal Skin: BlueTwo Windows Version: Windows...
Replies
5
Views
1K
No. Installing the program just installs the codecs at the same time, and MP uses those codecs. If you can manage to install the codecs without the program then that should be fine (unless codecs are hardcoded to only work when the program is registered).
No. Installing the program just installs the codecs at the same time, and MP uses those codecs. If you can manage to install the...
I have a question about Filter Packs. Basically I was wondering why they aren't recommended, according to the Requirements list...
Replies
6
Views
2K
Hi, set as Video Renderer: VMR9 set your TV as primary display if possible Flip
Hi, set as Video Renderer: VMR9 set your TV as primary display if possible Flip
Hello, I've installed Mp, and it works great but I have an black preview screen on my TV. Full screen is working properly and...
Replies
1
Views
1K
Area: Media Portal Program MediaPortal Version: 1.3/2 rc 1 + cvs MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2) .NET CLR Version: 1.1.4322 & 2 DirectX Version: 4.09.00.0904 (9.0c) Audio Codec: intervideo windvd platinum Video Codec: intervideo CPU Type: AMD Athlon 64 3000+ Memory: 1024 MB Motherboard...
Area: Media Portal Program MediaPortal Version: 1.3/2 rc 1 + cvs MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2)...
Area: Media Portal Program MediaPortal Version: 0.1.3.0 (2005-07-16) MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2)...
Replies
14
Views
3K
Hi, I have a cm11 and tried to use the x10 plugin with the xAP x10 service and was having difficulty... it only works if I start the xAP listener (debugging tool from xAP site) and then the xAP connector gui - in that order. (i did make sure the com port was set correctly in the config xml). anyway, it doesn't work at all with...
Hi, I have a cm11 and tried to use the x10 plugin with the xAP x10 service and was having difficulty... it only works if I start...
Hi, I have a cm11 and tried to use the x10 plugin with the xAP x10 service and was having difficulty... it only works if I start...
Replies
0
Views
996
MP1 MP2 channel setup DE
thanks for the reply.. but if i uncheck the channels in mp then backup the channellist file, why do i still get the unchecked ones displaying in webepg? john
thanks for the reply.. but if i uncheck the channels in mp then backup the channellist file, why do i still get the unchecked...
why am i having so many problems seting up my channels ok this is what i am doing. through media portal setup i am scanning all...
Replies
2
Views
2K
A
I also have this problem. I'm using version 0.1.3.0. Can anyone help with this problem? Thanks
I also have this problem. I'm using version 0.1.3.0. Can anyone help with this problem? Thanks
Hi all. I get this error when i try to "Save Settings" in winlirc plugin...
Replies
1
Views
2K
LOL thats probabably my problem too , when i was trying to fix things up a while back i uninstalled AC3 codec and i haven't reinstalled it yet, i will try that and see what happens , thanks zewe
LOL thats probabably my problem too , when i was trying to fix things up a while back i uninstalled AC3 codec and i haven't...
Hey i have a tricky problem when playing DVDs in MP i only get blak screen buti have sound, everyting else works, have installed...
Replies
5
Views
1K
That did fix the problem. I do not agree that its a video card issue. The 6150 + Athlon 64 3000+ is more than enough to play a divx stream without stressing.
That did fix the problem. I do not agree that its a video card issue. The 6150 + Athlon 64 3000+ is more than enough to play a...
Hello All, Thanks for providing such wonderful software. I have converted to it over the MCE software even though i'm still...
Replies
3
Views
2K
MP1 MP2 DVD subtitles DE
Anybody has a solution for this issue?
Anybody has a solution for this issue?
I'm a newbie and after installation of MP I cannot view DVD without subtitles. If I go to the DVD menu I can remove subtitles for...
Replies
1
Views
2K
Since you havent filled out the support template, the best we can do is guess. So perhaps you have your speakers hooked up analogue and your codecs arent decoding the AC3 track? Check the codecs your using and set them to decode to stereo/surround.
Since you havent filled out the support template, the best we can do is guess. So perhaps you have your speakers hooked up analogue...
I have tried all the audio codex's i have, when i play regular AVI or MPEGs the sound plays normaly, but when I try to play the...
Replies
1
Views
1K
Hej I tryed PCM but it still did it. I just don't get it, cause the processor power is not at 100 %. But i ended on giving up and change the card to another softwaqre one i had lying around. René
Hej I tryed PCM but it still did it. I just don't get it, cause the processor power is not at 100 %. But i ended on giving up...
Hello I have a MSI mega 180 with the recomented tv card, which is a software one. I would prefer a hardware, byt till the money...
Replies
4
Views
2K
I use a LCD project of which the contrast ratio is not that big :( The new LCD projector use a iris (change the amount of light dynamically) to increase the contrast (the darker the picture the more light). Now I have been thinking that this can also be done by software that adjust the brightness of the movie on a frame by frame...
I use a LCD project of which the contrast ratio is not that big :( The new LCD projector use a iris (change the amount of light...
I use a LCD project of which the contrast ratio is not that big :( The new LCD projector use a iris (change the amount of light...
Replies
0
Views
1K
Yep that fixed it, Thank you very much.
Yep that fixed it, Thank you very much.
I have tried switching the codexs in the MP setup to 5 different ones and the problem continues. I tried looking through the forums...
Replies
2
Views
1K
HI, i already tried all these things. :-( and i have just reinstalled the system a few weeks ago. isn´t there another way?
HI, i already tried all these things. :-( and i have just reinstalled the system a few weeks ago. isn´t there another way?
hi, i have just installed some programs after the installation of MediaPortal 2 RC1. the programs are "nimo codec" and...
Replies
2
Views
1K
sound settings for PVR150 are in driver setup In MP setup Television/ Capture Cards /edit property of your TV card In device property you have a setup button for elements of your card driver
sound settings for PVR150 are in driver setup In MP setup Television/ Capture Cards /edit property of your TV card In device...
Hello, Is it possible to save in an other format than DVR-MS? Because this doesn't won't to play in mplayer. No demuxer in...
Replies
8
Views
2K
Yes, i use one cable to the DVD from the motherboards soundcard. So i think thats why i cant use 5.1, somehow i get surround. I didnt got my question about the videocodecs answered, I really need too now exactly which codec I should use, both sound and video... i think it is very hard to understand that from all the "guides"...
Yes, i use one cable to the DVD from the motherboards soundcard. So i think thats why i cant use 5.1, somehow i get surround. I...
Hi there! I have MediaPortal 0.1.3.0, .NET 1.1, FFDShow, and that subprogram (?) Both things i was asked to install when I...
Replies
6
Views
3K
If you mean, is there anothe card except Soundstorm then yes, there are 2. I only remember 1 of them because I have the HDA X-Mystique. The other might be made by Turtle Beach I think.
If you mean, is there anothe card except Soundstorm then yes, there are 2. I only remember 1 of them because I have the HDA...
This is not a Mediaportal issue but since I have read almost every post there is in here about the subject and 'cause you all have...
Replies
6
Views
3K
Area: Nextview import to MP v2.0 MP Version: 2.0 RC1 ( CVS from 05.11) Skin: blue Windows Version: WinXP home (SP2) CPU Type: PIV 1,6GHz Memory: 512 MB Kingston Motherboard Chipset: Asus IGP RS 300 TV Card: Hauppauge PVR-150 (not MCE) TV Card Type: hardware TV Card Driver: HCW2_3b_23102PP2 First some Steps about nextview...
Area: Nextview import to MP v2.0 MP Version: 2.0 RC1 ( CVS from 05.11) Skin: blue Windows Version: WinXP home (SP2) CPU Type...
Area: Nextview import to MP v2.0 MP Version: 2.0 RC1 ( CVS from 05.11) Skin: blue Windows Version: WinXP home (SP2) CPU Type...
Replies
0
Views
2K
Where did you get the 3.10 version of G-Force? According to their internetsite the most recent version is 3.0.1. The version before that was 3.0.
Where did you get the 3.10 version of G-Force? According to their internetsite the most recent version is 3.0.1. The version...
has anyone the new version 3.10 working with mp ? i only got an black picture. the old 2.81 version works fine with mp.
Replies
1
Views
2K
Yepp.. that's the one, thanks! The sync is back on track again.. :D -Roger-
Yepp.. that's the one, thanks! The sync is back on track again.. :D -Roger-
The problem with audio out of sync is appearing when I choose Default Audio Device as a renderer. With Default DirectSound Device...
Replies
2
Views
1K
The MS version of the transport stream engine was pretty lacking, so the devs have rolled back to DRV-MS while they work on their own version. If you download the later CVS snapshots (any from about a week ago on) then you willbe recording in DVR-MS again and the burner plugin can automatically convert this to MPEG2 if you wish.
The MS version of the transport stream engine was pretty lacking, so the devs have rolled back to DRV-MS while they work on their...
I changed to 0.2.0 RC1 and recognized all Digital TV-Recordings are coded as TS-MPEG - independent of the codec chosen in...
Replies
1
Views
1K
hi civikdude was just wondering, is the quality of your live tv ok or are you having problems? My live tv isnt to good, i have a hauppauge pvr 150 + nvidia card connected to an LCD tv via dvi and the quality isnt that good. I can split my tv picture and show normal tv through my sky box and also through MP, and having these...
hi civikdude was just wondering, is the quality of your live tv ok or are you having problems? My live tv isnt to good, i...
Are you using: 1) NVIDIA video card 2) Hauppauge TV card 3) Mpeg2 decoder If so, and you have successfully obtained good...
Replies
3
Views
4K
I'm having trouble with recordings. They only get 8068 kB and the picture jumps (isn't smooth). I also have problems setting up my Pinnacle PCTV 50e card and recordings to make avi files that my Pinnacle Show Centre can read. /M
I'm having trouble with recordings. They only get 8068 kB and the picture jumps (isn't smooth). I also have problems setting up...
I'm having trouble with recordings. They only get 8068 kB and the picture jumps (isn't smooth). I also have problems setting up...
Replies
0
Views
1K
When I try to compress recorded TV to MPEG it works fine for all channels except channel 10 in Sydney. When it compresses the entire audio track is lost. I have done some experimenting with GraphEdit and it seems the problem lies in the connecting of the audio pins from the DVR reader to the muxer. Although the connect method...
When I try to compress recorded TV to MPEG it works fine for all channels except channel 10 in Sydney. When it compresses the...
When I try to compress recorded TV to MPEG it works fine for all channels except channel 10 in Sydney. When it compresses the...
Replies
0
Views
1K
Hello, When i watch a recorded TV show, there is a black shade on 95 % of image. It is more sink than the original source (tuner). The image seems ok but only on 5 % in the right hand side of the screen. I use Leadtek Winfast TV 2000 deluxe and MJPEG codec for recording. It works fine with others software i use for recording. I...
Hello, When i watch a recorded TV show, there is a black shade on 95 % of image. It is more sink than the original source...
Hello, When i watch a recorded TV show, there is a black shade on 95 % of image. It is more sink than the original source...
Replies
0
Views
1K
Doing a seach before posting should be your first step. There are lots of threads regarding the ATI Remotes and MP
Doing a seach before posting should be your first step. There are lots of threads regarding the ATI Remotes and MP
Is there someone who use the ATI remote on Media Portal? Does it wor well or is it better to by the Microsoft MCE Remote? Or...
Replies
2
Views
2K
Top Bottom