Ok, after much tinkering and wasting time I have come to the conclusion that the TV card drivers are causing BSOD's and they don't appear to like working with MP in terms of channel tuning :(
I've now ordered an Avermedia USB2 DVB tuner - lets hope that works better!!
I'd advise everyone AGAINST buying a Lifeview TV Walker Q DVB-T...
Ok, after much tinkering and wasting time I have come to the conclusion that the TV card drivers are causing BSOD's and they don't...
MediaPortal Version: 0.2.1 (same with lower versions)
Windows Version: XP Pro SP2
CPU Type: AMD Duron 1.4Ghz
HDD: Toshiba 40GB...
Does anyone use Boogersoft for the Pinnacle remote. If so can someone please share a working config file with me. I just need a total reinstall of my system because of hard drive failure and lost my config file. So if someone please could send me the config file or paste the relevant MediaPortal part from the config file on here. You...
Does anyone use Boogersoft for the Pinnacle remote. If so can someone please share a working config file with me. I just need a...
Does anyone use Boogersoft for the Pinnacle remote. If so can someone please share a working config file with me. I just need a...
(I'm running svc from today, no TV-Server)
How do you get pincode to work for channel groups?
I've created two channel groups and I have added a pincode to one of them. In this group I've moved one single channel, but MP never asks for the pincode. I can access the channel both through the group that should have been locked by...
(I'm running svc from today, no TV-Server)
How do you get pincode to work for channel groups?
I've created two channel groups...
(I'm running svc from today, no TV-Server)
How do you get pincode to work for channel groups?
I've created two channel groups...
Hi,
Winxp home
2xnova usb sticks
I've done plenty of research and testing but just wanted to know whether anyone had actually managed to get 2 nova usb sticks working on the same machine at the same time...
With the media portal client on it's own both sticks come up but when I try to edit the second one it comes up with the...
Hi,
Winxp home
2xnova usb sticks
I've done plenty of research and testing but just wanted to know whether anyone had...
Hi,
Winxp home
2xnova usb sticks
I've done plenty of research and testing but just wanted to know whether anyone had...
It sounds like IRQ sharing between the two cards. If you have other avaliable PCI slots, try moving one of the cards. Your motherboard manual will most probably tell you which slots share an IRQ.
It sounds like IRQ sharing between the two cards. If you have other avaliable PCI slots, try moving one of the cards. Your...
1. TV Card: I have one Hauppauge HVR-1300 and one wifi card. When I go to My TV in DVB-T mode I wath the tv by jumps. When I...
"and it still not play with the same problem."
I don't understand this setnce, but I belive MP has a a "feature" that blanks the screen if MP is in fullscreen and idlee for an hour... try disabling this if it is enabled (config --> general I think). Could be a bug....
"and it still not play with the same problem."
I don't understand this setnce, but I belive MP has a a "feature" that blanks the...
MediaPortal Version: 2.0.1.0
Windows Version: Windows XP Home SP2 + Fully updated
Codec: NVIDIA PureVideo
Hi there,
I have...
So when i connect the SVideo OUT from the Satellite to the Tuner card, that would still be considered analog right?
I guess for my situation I would just need the single tuner card with the SVideo In (the PVR-150 as you suggested)...now, would connecting to the svideo port actually be considered as using the tuner? Or can I still use...
So when i connect the SVideo OUT from the Satellite to the Tuner card, that would still be considered analog right?
I guess for my...
Hi, I came across your site from another forum, and so far im really interested in your software, and the community is nice here as...
Try this one: http://support.microsoft.com/?scid=kb%3Ben-us%3B888795&x=13&y=7
About using it with languages other than English, you'd have to search our forums, there was a thread somewhere about this problem.
Try this one: http://support.microsoft.com/?scid=kb%3Ben-us%3B888795&x=13&y=7
About using it with languages other than English...
MediaPortal Version:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard:
Motherboard Chipset:
Motherboard Bios...
My WebEPG crashes everytime I attempt to run it outside of MP. But if I were you, try configuring everything in WebEPG from scratch instead of using the old configfiles.
My WebEPG crashes everytime I attempt to run it outside of MP. But if I were you, try configuring everything in WebEPG from scratch...
I've done an uninstall, cleanup and installed the new 0.2.1.0. Then I set up everything. To restore WebEPG configuration I restored...
Mysterious solved
Hi again
Some weeks ago I did a question ...that no one could reply. Now I have the answer and want to close this thread :( .
Recently I installed last MP 2.1.0 release from scratch, and took a look to MP log file. Some lines maked reference to "... something in path is wrong ..." and here I guessed my...
Mysterious solved
Hi again
Some weeks ago I did a question ...that no one could reply. Now I have the answer and want to close...
All was working fine, but some TDT channels never appeared in MP 2.0.2. Then I thought "What about installing MP SVN last version"...
when using more than one Tuner card, you should set one to a higher priority than the other in the TV card configuration section.
In the TV channels section, there is a tab above the list of channels labelled "TV Cards" or something. Click on that and make sure that each card has all the channels assigned to it.
I use multi...
when using more than one Tuner card, you should set one to a higher priority than the other in the TV card configuration section...
1. TV Card:
Hello, I have only started using media portal this week as i have windows media center edition which fortunatly...
You need to use MyBlaster which uses the MCE receivers IR Blasters to change the channel on the sky box. If you set a recording MP would prompt you on screen if watching TV and then it would change channel afaik.
You need to use MyBlaster which uses the MCE receivers IR Blasters to change the channel on the sky box. If you set a recording MP...
Does anyone know if it's possible to control a Sky settopbox with an MCE control?
Also, how does that work. If you set the timer...
Thanks for the reply.
I looked trough the forums and found MPTray. Is this the c# program that was mentioned in the last post? HOwever i have had bad luck in finding a suitable keymap.xls file.
eku60, could you help me and point it out? Anyone else also ocf. :)
Thanks,
Peter
Thanks for the reply.
I looked trough the forums and found MPTray. Is this the c# program that was mentioned in the last post...
Hello!
Can anyone share information on how to get the Twinhan IR remote to work within MediaPortal?
Is HIP the correct way to...
I still dont see what the cable modem has to do with the choice of video card, but i would normally give the following recommandations:
If you are serious about HD playback i would get a 7600GT. If you are connection to an LCD TV with a HDMI input, there are a few version out there with HDMI output.
If you dont need all the fancy HD...
I still dont see what the cable modem has to do with the choice of video card, but i would normally give the following...
I have an asus a8n-e motherboard with pci-express available I am wondering what people have done in this case in regards to CABLE...
A small update..
When i edit the settings form my card in setupmp by checking and the unchekin "use this card for viewing TV" and "Use this card for recording TV" then i can get the card working again..
But when i press the timeshifting i MP then im back to the error agin...
//Johan
A small update..
When i edit the settings form my card in setupmp by checking and the unchekin "use this card for viewing TV"...
Hi all,
Ive just bought a DIGITAL-TV DVB-T TER CI (3040) for the use i MP, but i ran in to big problems.
After a little...
sorry, couldn't help it.
I will look carefully into your problem next week and see if this a bug. I'll keep you posted but, the other way round, tell me if you're able to solve this issue in the meantime.
...AND STOP WHINING
sorry, couldn't help it.
I will look carefully into your problem next week and see if this a bug. I'll keep you posted but, the...
MediaPortal Version: 0.2.0.4
Windows Version: Win XP sp2
CPU Type: Intel Celeron 2.4Ghz
HDD: Maxtor 250Gb
Memory: DDR 1Gb...
But, alas. There is no sound on the recording. I don't know if this problem is related to the previous, or if it is a consequence of the external audio-transition tha the card uses. I can't seem to find a way to configure the input to be soundcard:line-in. I think perhaps this was possible in 0.1.3. I get sound when I watch live TV...
But, alas. There is no sound on the recording. I don't know if this problem is related to the previous, or if it is a consequence...
Area: Media Portal Program
MediaPortal Version: 0.2.1.0 (2006-10-21)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)...