If something like PowerDVD can play it all the way through ok, then the drive is fine.
If it will not then it's time to send back, or replace depending on how old the drive is.
If something like PowerDVD can play it all the way through ok, then the drive is fine.
If it will not then it's time to send back...
Warning: This is a genereal (not MP-specific question).
I have played back several DVDs that cause my PC to have all kinds of...
Yes, if you scroll down in the thread Taipan linked you to then you will see that he was talking about doing exactly that, modifying the number of displayed channels. I believe to get the text larger as well you need to edit the fonts.xml file (or similar, can't remember the exact name) and change the font size as well.
There is...
Yes, if you scroll down in the thread Taipan linked you to then you will see that he was talking about doing exactly that...
I am currently running v0.2.0.4
Some while back I seem to remember a post and download available for reducing the number of...
(I'll add the template info when I get in in, honest!)
Hi all. Im new to mediaportal, just wanted to say its fantastic! I've been having problems finding a codec however. When using the MPV/MPA codecs the aspect ratio is slightly out, regardless of set-up. 16:9 is too squished and 4:3 is also.
When using dscaler and selecting the...
(I'll add the template info when I get in in, honest!)
Hi all. Im new to mediaportal, just wanted to say its fantastic! I've been...
(I'll add the template info when I get in in, honest!)
Hi all. Im new to mediaportal, just wanted to say its fantastic! I've been...
the version is specified in the referemces/xml file/
You can update this but be aware that you may get some issues if there are outdated parts in the skin.
the version is specified in the referemces/xml file/
You can update this but be aware that you may get some issues if there are...
I have make a new skin based on bluetwo 16x9 (latest version), but when i start the mp i get a message: The currently selected skin...
Hi everybody,
I just wanted to know if someone tried running MP (latest version) with the "Life View Prime 30 " TV card, I couldn't find it on the Supported TV cards list but I was hoping that it wasn't listed because it wasn't tested yet... (-;
Hi everybody,
I just wanted to know if someone tried running MP (latest version) with the "Life View Prime 30 " TV card, I...
Hi everybody,
I just wanted to know if someone tried running MP (latest version) with the "Life View Prime 30 " TV card, I...
OK, Thanks for the reminder.
I have upgraded the ASUS GeForce driver from Version 8.something to 9.something and it looks MP works fine now after S4. (S3 now has a problem but that looks windows related: Screen stays black and system doesnt restore properly). Thanks for the pointing me in the right direction.
It seems I have...
OK, Thanks for the reminder.
I have upgraded the ASUS GeForce driver from Version 8.something to 9.something and it looks MP...
Hello Everybody
I experience a problem with DirectX after MP comes back from Standy (both S3 or S4). I posted the error message...
Last version MP.
If i click on any files with [...] not working play, i hear only click but video not play.
Example: [SAMPLE] Kill Bill Vol. 1 1080i ... 100MB
Nelly Furtado - Maneater [2006][SkidVid] ... 52.16MB
0K!AS
Last version MP.
If i click on any files with [...] not working play, i hear only click but video not play.
Example: [SAMPLE]...
Last version MP.
If i click on any files with [...] not working play, i hear only click but video not play.
Example: [SAMPLE]...
The cable company we use here has several channels where two different channels share the same channel. Ie one TV channel can be on from 08.00 to 20.00, and the other channel would be on from 20.00 to 08.00.
I can download program data for both channels seperatly, but is there any way to merge the program data from these two...
The cable company we use here has several channels where two different channels share the same channel. Ie one TV channel can be on...
The cable company we use here has several channels where two different channels share the same channel. Ie one TV channel can be on...
I have hauppauge WinTV-Nova-T dvb (PCI) card. Mediaportal is
saying Unable to create graph for this device.
The card is working ok with MyTheatre.
Drivers are the newests.
What's the matter.
It doesn't founds any channels when I tried to scan ?
I have hauppauge WinTV-Nova-T dvb (PCI) card. Mediaportal is
saying Unable to create graph for this device.
The card is...
I have hauppauge WinTV-Nova-T dvb (PCI) card. Mediaportal is
saying Unable to create graph for this device.
The card is...
This is my experience with 0.2.1.0, in case it helps.
With 0.2.1.0 installed, I had to do a rescan. The first one gave me the channels in the order found and not in logical channel sequence. I swapped the MPSA.ax in windows\system32 with the one attached to this thread and reran. It worked - the channels were in the right order. I...
This is my experience with 0.2.1.0, in case it helps.
With 0.2.1.0 installed, I had to do a rescan. The first one gave me the...
Hi,
I'm using Mediaportal 2 in the UK, and have just scanned for Freeview tv stations on my Terratec Cinergy 2400i DT card...
Most of the remotes that plug into the tv card itself will not work with MP unless someone has already taken the trouble to build in support. You can check the HIP website to see if yours has been set up already (www.byremote.net I think) but in my view you are much better off spending the AU$69 to buy an MCE remote. It's much more...
Most of the remotes that plug into the tv card itself will not work with MP unless someone has already taken the trouble to build...
Hi,
I have a http://www.geniatech.com/pa/t800x.htm DVB card. This is working ok in Media Portal. I wish to get the remote...
got it working.....i had to install the newest directX from microsoft
when i started it there was a error, but the mediaportal startup icon blocked me from seeing it, i could only click "ok"...when i changed my resolution, it let me see what it said on startup, and it was having a problem with directx....go figure:P
got it working.....i had to install the newest directX from microsoft
when i started it there was a error, but the mediaportal...
Area: Media Portal Program
MediaPortal Version: 0.2.0.4 (2006-08-11)
MediaPortal Skin: Razor
Windows Version: Windows XP (SP2)...
hi
i had to made a restore of my bios 1.8 from my Asrock 775 VSTA Dual, since that the USB wake up function did not work anymore.
i looked into the acpi settings but dont find any options for that.
what should i do?
cu
mitze
hi
i had to made a restore of my bios 1.8 from my Asrock 775 VSTA Dual, since that the USB wake up function did not work...
hi
i had to made a restore of my bios 1.8 from my Asrock 775 VSTA Dual, since that the USB wake up function did not work...
I have the same pb
Free channels works perfectly but
although the log files shows that CI CAM is recognised and channel descrambled
the screen stays black (or with the last image of free channels) when trying to watch an encrypted channels
log is below
any idea ?
thks
28/10/2006 21:46:36 371 [Info.] update dvbc...
I have the same pb
Free channels works perfectly but
although the log files shows that CI CAM is recognised and channel...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 (2006-07-03)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)...
Seems MP doesn't like the learned pronto- airboard codes. I switched to MCE codes on my MX-850 and fired up an old copy of Girder to control TTek. Seems like I get very unreliable control. Sometimes no IR, sometimes multiples. I have the anti-repeat set to 250 in Girder, maybe I need more?
Any other thoughts on remote control using...
Seems MP doesn't like the learned pronto- airboard codes. I switched to MCE codes on my MX-850 and fired up an old copy of Girder...
MediaPortal Version .2.1.0:
Windows Version xp:
I just bought the USB-UIRT and can't get it to control MP. I went thru the...