Post problems you have when using MediaPortal,
or pre installation questions in here.
Good point. HDTV hasn't really taken off very much in Australia, so I don't bother with it.
Good point. HDTV hasn't really taken off very much in Australia, so I don't bother with it.
Just got a dell GX260 for use as a media pc, things seem a bit sluggish at the moment and im not sure what the cause is
CPU: P4...
the upshot is really that if you leave a static image on a plasma, CRT or LCD, you *will* eventually get burn in.
Software can make small attempts to prevernt this, but in the end, the two options are either to blank the display or turn the bloody thing off all by yourself.
Even with Pixel Rotation, as has been said before, most...
the upshot is really that if you leave a static image on a plasma, CRT or LCD, you *will* eventually get burn in.
Software can...
hi there,
Is there a plugin or some way to stop burn-in on plasma when using htpc e.g the pixels roating ......
Guys, I'm not a frequent user of teletext but I'm pretty sure that was working in some previous release with PVR150MCE. Now teletext tab disappear.
Currently I'm able to get teletext only from the ss2 card.
Claudio
Guys, I'm not a frequent user of teletext but I'm pretty sure that was working in some previous release with PVR150MCE. Now...
Guys, I'm not a frequent user of teletext but I'm pretty sure that was working in some previous release with PVR150MCE. Now...
This is my first post to MediaPortal (most definately not my first visit) and I want to make use of the opprtunity to congratulate the team on a GREAT product!
Area: Media Portal TV - Controlling Settopbox
MP Version: RC4
Skin: Razor
Windows Version: Windows XP SP2
CPU Type: Intel Pentium IV
Memory: 512MB
Motherboard Chipset...
This is my first post to MediaPortal (most definately not my first visit) and I want to make use of the opprtunity to congratulate...
This is my first post to MediaPortal (most definately not my first visit) and I want to make use of the opprtunity to congratulate...
Hi,
My cable provider is going to start transmitting some select content in HD. This is going to be sent over DVB-C, and as far as i understand its going to be in MPEG-2. I found a channel marked "HDemo" on my last autotune, and when tuning to it i noticed a *VERY* high image quality, and that it had "HD" logo in the corner. Im...
Hi,
My cable provider is going to start transmitting some select content in HD. This is going to be sent over DVB-C, and as far...
Hi,
My cable provider is going to start transmitting some select content in HD. This is going to be sent over DVB-C, and as far...
Anyone out there that gets HVR-900 Analogue to work?
Mine doesn't. Unable to create graph error. The digital part works OK.
Anyone out there that gets HVR-900 Analogue to work?
Mine doesn't. Unable to create graph error. The digital part works OK.
is the HVR-900 supported?
its a USB version of the HVR-1300 card!
if not (since I have heard from other users that it does...
it sounds like you have tearing. Try enabling "Exclusive DirectX" in MP configuration.
For the remote, it's true, you can't use IrDA for remote controls (unless you are very lucky and have some sort of hardware that is dual purpose).
Just buy a Microsoft remote and reciever bundle. It's way cheap and will also work with your...
it sounds like you have tearing. Try enabling "Exclusive DirectX" in MP configuration.
For the remote, it's true, you can't use...
Hi there,
This is my hardware (simple list): Win XP Pro SP2, CPU Intel 3Ghz, RAM 1Gb, HD Serial Ata 200 Gb, ATI Radeon 9600XT...
To give you more ideas, mine is like this :
Genre/Artist/Album/Track. Artist - Title.mp3
When a genre gets overcrowded (In general beyond 100 artists) I try to creat new genres to diminish the load.
To give you more ideas, mine is like this :
Genre/Artist/Album/Track. Artist - Title.mp3
When a genre gets overcrowded (In...
Hi,
I have a question about what the best folder structure is to store your media to keep the access time low?
for example...
Because it's likely that other users will find the same problem... So maybe I should log in the Test Team Website and submit it as a bug :) .
Because it's likely that other users will find the same problem... So maybe I should log in the Test Team Website and submit it as...
Recently I was let a mini USB2 DVB-T tuner (Airis G807, which is supported in newer SVN builds). I have a Hauppauge PVR 350 in my...
I have a bit of an issue with my computer, it has a wireless network card installed which is great.
Only problem is when the system goes into s3 and then comes out the wifi loses it's connection. I've tried everything I can think of to make the thing wake up from the driver end (wifi card) but it doesn't work.
What does work is...
I have a bit of an issue with my computer, it has a wireless network card installed which is great.
Only problem is when the...
I have a bit of an issue with my computer, it has a wireless network card installed which is great.
Only problem is when the...
http://logigamer.com/forums/viewtopic.php?t=142 - it works
direct download here...
http://www.ida.net/users/oe1k/OpticalMouse/uberInstall.exe
http://logigamer.com/forums/viewtopic.php?t=142 - it works
direct download here...
Anyone had any experience with this one (I didn't see anything when I searched for 'Logitech')? It appears to use Windows Media...
it is magic !!!
Thank you very much Dman and Steanrdr11.
Stick works with CVS "mediaportal-svn-05-10-2006--08-08.rar".
I´d be very interested in the changes that had to made....
Thanks, Tobi
it is magic !!!
Thank you very much Dman and Steanrdr11.
Stick works with CVS "mediaportal-svn-05-10-2006--08-08.rar".
I´d...
There should be support for tihs card since april 27.
But Configuration says "no video capture card(s) were found..."
In the...
Mediaportal does startup, but with a black window.
Borders of the window is showed, but inside the window everything is black.
Tried reinstalling video drivers, directx (different versions), .net different versions etc...
Below the output of the template.
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4...
Mediaportal does startup, but with a black window.
Borders of the window is showed, but inside the window everything is black...
Mediaportal does startup, but with a black window.
Borders of the window is showed, but inside the window everything is black...
I'm trying to pick up a local station here, I manage fine on a portable tv but on my tuner card it skips those channels. I see here (http://msdn.microsoft.com/library/default.asp?url=/library/en-us/directshow/htm/countryassignments.asp) that the channel is listed as not used, but in my area one of the channels that displays sport is...
I'm trying to pick up a local station here, I manage fine on a portable tv but on my tuner card it skips those channels. I see here...
I'm trying to pick up a local station here, I manage fine on a portable tv but on my tuner card it skips those channels. I see here...
Hello :)
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-10.05.2006- 1:01:02,12
(2006-05-10)
MediaPortal Skin: Project X
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: -
Video Codec: Hauppauge WinTV PVR PCI II Decoder
CPU Type: Intel...
Hello :)
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-10.05.2006- 1:01:02,12
(2006-05-10)
MediaPortal...
Hello :)
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-10.05.2006- 1:01:02,12
(2006-05-10)
MediaPortal...
Now it is. :wink:
Now it is. :wink:
I recently purchased a remote from a seller on ebay that appeared to be a replica of an MCE v1 remote, supposedly produced by Dell...
I confirm that too. Number keys don't work.
I confirm that too. Number keys don't work.
It's been working great, but after that CVS it doesn't work. I just tried newest CVS, but still don't. The thing is, that when I...
DirecTV and MP Setup
Kevon 27,
How did you configure your DirecTV feed in MP configuration? I'm trying to get my DirecTV box & ATI Radeon 9800 Pro to work with with MP.
DirecTV and MP Setup
Kevon 27,
How did you configure your DirecTV feed in MP configuration? I'm trying to get my DirecTV box &...
Folks with directv set top box, how do you setup the program guide to show the CORRECT Channels and Shows (time) in your time zone...
where is myblaster plug for italian skybox ?
where is myblaster plug for italian skybox ?
where is myblaster plug for italian skybox ?
I haven't tried it myself but what about the PocketPC client? If everything is wi-fi enabled you can control MP via that.
Otherwise, the only other route I can think of is a small touch screen monitor, the type of thing fitted in car-puters and a v long vga cable.
There is, of course, the laptop and VNC route to go down.
But...
I haven't tried it myself but what about the PocketPC client? If everything is wi-fi enabled you can control MP via that...
Hi All,
I've had MediaPortal running for quite a while now and it's great and i'm slowly starting to use it more and more, i've...
I have a Matrox P650 which is fully DX8.1 complaint and it somewhat works with VMR9 because I believe MediaPortal draws directly to the screen. I am thinking of upgrading the card as my P650 is getting a little ancient. Overlay has been crappy, really slow and often unreliable wheras VMR9 "works" smoothly even though my card doesn't...
I have a Matrox P650 which is fully DX8.1 complaint and it somewhat works with VMR9 because I believe MediaPortal draws directly to...
Hi,
I noticed that many posts mentioning Overlay as the video renderer, while MP only lets me choose between VMR7 and VMR9. I...
I went to Hauppauge's website & I'll try the HCWCLEAR utility, followed by the latest drivers, the WinTV2000 program & Video Decoder Version 5 dated Oct. 2005 & see what happens. I have the feeling I'm making this harder than it should be, but the disk that came with my OEM card didn't have WinTV, so I didn't think I needed it.
I went to Hauppauge's website & I'll try the HCWCLEAR utility, followed by the latest drivers, the WinTV2000 program & Video...
I just can't figure out how to get the s-video in of my 150MCE working.
As per another post, I added the CVBS/SVHS, but I get no...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: MCE
Windows Version: Windows XP
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPEG/AC3/DTS/LPCM Audio Decoder
Video Codec: Mpeg2Dec Filter
CPU Type: Intel Pentium 4 - 2.26GHz
Memory: 511 MB
Motherboard...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: MCE
Windows Version: Windows XP
.NET...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: MCE
Windows Version: Windows XP
.NET...
I think I remember seeing a related post to this. If my memory is working then I think you'll need to upgrade your MP Version to the latest release 0.2.0.0 RC4 and probably the latest SVN builds.
I think I remember seeing a related post to this. If my memory is working then I think you'll need to upgrade your MP Version to...
Area: Capture card
MP Version: v0.1.3.
Skin: mce
Windows Version: XP tablet SP2
CPU Type: Intel Centrino 1.4Ghz
Memory: 512...
Let's take a look into my crystal ball... You're using an old plugin that is not compatible with MP anymore.
Next time please supply some more information than those few lines. You're lucky that I got my crystal ball with me today! :mrgreen:
And please don't crosspost! Posting once is enough!
Let's take a look into my crystal ball... You're using an old plugin that is not compatible with MP anymore.
Next time please...
I get this : :arrow:
Exception system.TypeLoadException : Could not load type' Mediaportal.profie.xml' from assembly 'Core...
Thanks then everyone.
I think I have it working to a certain extent anyway until I can play abit more.
Now I just need to work out how to setup 2 Hauppauge 150MCE cards which I will search on but if I get stuck I will post somewhere.
Thanks again :)
Thanks then everyone.
I think I have it working to a certain extent anyway until I can play abit more.
Now I just need to...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: MCE
Windows Version: Windows XP (SP2)...
Hi All,
Can anyone tell me if there is a way to make the 3 colored buttons on the remote that comes with the DVB-T300 map to a function that selects the menu options from the home menu ?
So the Orange one is for DVD/VCD. What would the key combo be to switch from say watching TV to go to the DVD section of MP ?
Is there like...
Hi All,
Can anyone tell me if there is a way to make the 3 colored buttons on the remote that comes with the DVB-T300 map to a...
Hi All,
Can anyone tell me if there is a way to make the 3 colored buttons on the remote that comes with the DVB-T300 map to a...
Re: Issues with sleeptimer, converting ac3 video, album sear
Fixed in patch: http://sourceforge.net/tracker/index.php?func=detail&aid=1484550&group_id=107397&atid=647927
Need a dev to commit the patch first before you can use the patch though.
Sam
Re: Issues with sleeptimer, converting ac3 video, album sear
Fixed in patch...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
Please read this if it hasnt already been done:
https://forum.team-mediaportal.com/viewtopic.php?t=12846
Please read this if it hasnt already been done:
https://forum.team-mediaportal.com/viewtopic.php?t=12846
I like mediaportal SW, but my avermedia hybrid PCI is probably not supported in analog mode. Digital part of tuner is recognized...
Hello,
Has anyone had luck getting ATI Tv Wonder Pro working? I have this card and almost all other PVR software works with it, but I do not like them. MediaPortal is very appealing to me but I have been unable to get any input from card into MediaPortal autotune. The channels are all black.
Thank you,
Hello,
Has anyone had luck getting ATI Tv Wonder Pro working? I have this card and almost all other PVR software works with it...
Hello,
Has anyone had luck getting ATI Tv Wonder Pro working? I have this card and almost all other PVR software works with it...