Same problem with "IF" statement. No matter what "var_turnedon" is set to the if statement evaluates as TRUE jumping to the turnoff label. Can anyone help?
I should have mentioned - I'm trying to run tis script in "Translator"
Thanks
Ian
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<macro>
<item command="Load...
Same problem with "IF" statement. No matter what "var_turnedon" is set to the if statement evaluates as TRUE jumping to the turnoff...
I am hoping that someone can help me on the translator macro here, i can't get the if statement to work.
If i test the following...
Ok. I originally taught my setup the number buttons and OK, but when I had to reload I tried out some of the codes that were already included and to be honest, they work better. Feel free to experiment with the code sets that are included. It's not hard to keep trying different ones until it works.
Ok. I originally taught my setup the number buttons and OK, but when I had to reload I tried out some of the codes that were...
I have been using this for a while to blast a starchoice box and it works well from mp's tvguide.
I have a bell sub now as well...
Hmm i dont know if thats maybe a problem...for me its working fine with the MCE Remote.... if you want to test the MCE Device, you have to disable the "use abstract remote model" checkbox in the advanced IR Server Configuration.
If some Buttons dont work, you have to add them to the MCE Remote Mapping within the "remote control" part...
Hmm i dont know if thats maybe a problem...for me its working fine with the MCE Remote.... if you want to test the MCE Device, you...
Hello all,
I'm trying to have two buttons on my MCE remote run a couple of macros so i switched from MP native remote control to...
Hi,
I tried to run this plugin on new version of IR Server Suite - Test Build 1.4.2.4290 (and also 3158 and 4068) but without the success :( IR Server Suite doesn't recognize the plugin. Could you modify the plugin for latest versions of IRSS? Or help me how could I to set up Aver remote controler?
Hi,
I tried to run this plugin on new version of IR Server Suite - Test Build 1.4.2.4290 (and also 3158 and 4068) but without the...
I am the owner of a Avermedia card, and I found the remote is not suported for any third part application (Girder, HIP, Evengohost...
Check out the thread i posted in my previous post ... i found a solution ...
Check out the thread i posted in my previous post ... i found a solution ...
Hi,
i want to use the volume up / down buttons (original mce) to do some action, but the translator does not recognize the...
Sorry i still dont know what you exactly want ^^.
An MCE receiver will work under Win7 x64!! just read this thread Compatible IR blaster for windows 7 MCE? (64 bit) - Microsoft Answers
I can post some Screenshots with the right Configuration of the IRSS MCE Receiver Plugin if you want.
Sorry i still dont know what you exactly want ^^.
An MCE receiver will work under Win7 x64!! just read this thread Compatible IR...
Excuse my ignorance. I've spent a few hours researching IRSS, HIP, etc and still don't have a good feel for whether I can do what I...
AW: Unable to "learn" codes from other remotes, receiver unresponsive in "learn" mode
I solved the Problem for me!! I looked at the code from IRSS and found out that i need an active Transmit Plugin that supports learning.
After enabling the MCE transmit plugin it worked with an MCE Receiver but it seems that it is not working with...
AW: Unable to "learn" codes from other remotes, receiver unresponsive in "learn" mode
I solved the Problem for me!! I looked at...
I have an MCE remote connected to HTPC running Windows 7 Ultimate. The goal is to use single remote to operate the HTPC, the TV and...
For the "Microsoft MCE" config there's a "Remote" tab setting called "Disable Automatic Buttons" it was enabled. Turning it off has made the remote work a lot better!
Occasionally I still have to try a button twice so I may look into timing settings.
Thanks for your help!
For the "Microsoft MCE" config there's a "Remote" tab setting called "Disable Automatic Buttons" it was enabled. Turning it off...
I'm revisiting this as there must be a way to get this working.
Running Vista SP3
MP 1.2.2 client/server on same machine.
IRSS...
If you just want to control MePo you dont need IRSS but if you want to control more of your devices such as TV oder STB and maybe got some other Hardware (Ambilight System, LED Lighting in Living-Room) to control, IRSS is probably the only way.
If you just want to control MePo you dont need IRSS but if you want to control more of your devices such as TV oder STB and maybe...
Hi!
Wonderful plugin, but i have a small problem.
I would like to control my receiver via RS232 and i have already set a...
AW: Can`t add macro command "set multi mapping"
I got a solution for this problem. I looked at the Code and found the correct command to set the different mappings.
MultiMapping command:
<item command="Multi-Mapping: MPControlPlugin" />
The execution of the macro works fine but i still cant edit the entry in the...
AW: Can`t add macro command "set multi mapping"
I got a solution for this problem. I looked at the Code and found the correct...
Hi everyone,
has someone an idea, why i cant use the "set multi mapping" command in the macro editor of the MPControl Plugin?
I...
A couple of things I would add to this guide now:
The Tv3 External Channel Changer is outdated and does not work with the latest versions of MediaPortal. Just install IRSS (no configuration needed) and the TV3 blaster plugin. Enable and configure the plugin from within the TV Server Configuration which from that point this guide...
A couple of things I would add to this guide now:
The Tv3 External Channel Changer is outdated and does not work with the latest...
Couldn't find a guide, so I am making one. I won't be able to answer many questions. Credit to PABeaver for linking this all...
Wow I just created a thread about this very same behavior. Now 2 1/2 years later... did you ever figure out a resolution to this?
Wow I just created a thread about this very same behavior. Now 2 1/2 years later... did you ever figure out a resolution to this?
I've written about this a few times, but never get a response...perhaps someone here can explain this to me...
Description
I...
Did you ever find a solution to your problem?
Did you ever find a solution to your problem?
I'm trying to map my MCE remote's volume buttons to blast the volume codes for the receiver.
I did everything this guy did...
I was able to get this issue figured out.
When programming the STB codes, DO NOT HOLD DOWN THE BUTTONS ON THE REMOTE!!!
Just TAP them until the codes are learned.
I was able to get this issue figured out.
When programming the STB codes, DO NOT HOLD DOWN THE BUTTONS ON THE REMOTE!!!
Just...
I have used IR Server Suite for a few years and just now noticed something odd with it. I am using IRSS 1.4.2.4290 on Windows 7...
Sorry for the delayed reply rekenaar, thought I'd already given one. :oops:
Thanks for your help, and at least I'm glad I'm not the only encountering the issue. :D I Hope the devs will find some time on their hands soon!
Sorry for the delayed reply rekenaar, thought I'd already given one. :oops:
Thanks for your help, and at least I'm glad I'm not...
I'd like to know if it is possible to make the MP control plugin blast an IR code when I enter a plugin like MovingPictures. (and...
I use Translator works perfectly with +1 as macro configured.
I use Translator works perfectly with +1 as macro configured.
Hi,
how can i MAP the shift+1 directshowhelper stats to my remote? Can anybody tell which action i have to select in the MP...
I had a spare USBUIRT hanging around so i switched it out..new cable...re-taped all the IR emitters....still the same.
Is there anyway to vary the amount of time that the ir signal is sent for?
I see
Delay between digits
Numer of Repeats
Maybe the IR signal is being emitted for to long?
I had a spare USBUIRT hanging around so i switched it out..new cable...re-taped all the IR emitters....still the same.
Is there...
Hello
I'm having some problems getting a stable setup with my usbuirt on two dish vip211k receivers which are each connected to...
What is the meaning and use of the different parameters that can be set in the eventmapper? I can't find this info in the wiki or threads here.
What is the meaning and use of the different parameters that can be set in the eventmapper? I can't find this info in the wiki or...
What is the meaning and use of the different parameters that can be set in the eventmapper? I can't find this info in the wiki or...
2 years later, all up-to-date installs, and I get this same problem.
Anyone?
2 years later, all up-to-date installs, and I get this same problem.
Anyone?
I am unable to start the "TV3 blaster plugin" from the TV Server configuration it just pops up with a "Failed to start local comms"...
When the MCE receiver is disconnected (from the USB port), I have to restart the PC to make some buttons work (the "special" buttons such as the color buttons, the mce button, play, pause etc).
Does anyone know why this happens and how to solve it?
:S
When the MCE receiver is disconnected (from the USB port), I have to restart the PC to make some buttons work (the "special"...
When the MCE receiver is disconnected (from the USB port), I have to restart the PC to make some buttons work (the "special"...
humm unfortunately I cannot find anything strange in your logs...
Simone
humm unfortunately I cannot find anything strange in your logs...
Simone
Dear IR Server Suit team.
First I would like to thank you for the great program. I really appreciate your engagement and...
Thank you for that - I didnt use it
at the end I gave up and configured the antena instead
Thank you for that - I didnt use it
at the end I gave up and configured the antena instead
I cannot get the above to work :wtf:
I installed the latest IRSS suite and tried to configure the plugin under the TV Server...
Installed as application IRSS 1.4.2.4290.
Work only Enter and Esc buttons.
My settings:
In iMonHidReceiver.log i found messages:
2011-11-15 23:02:22.620714 - Using Remote MouseStick Mode: Keyboard
2011-11-15 23:02:22.651914 - HID_OpenDevice(): Trying to open device for writing config to it
2011-11-15...
Installed as application IRSS 1.4.2.4290.
Work only Enter and Esc buttons.
My settings:
In iMonHidReceiver.log i...
Installed as application IRSS 1.4.2.4290.
Work only Enter and Esc buttons.
My settings:
In iMonHidReceiver.log i...
Hi again
You can get plugin code from the MP plugin repository. IRSS is -->here<--.
SourceForge.net Repository - [mp-plugins] Index of /trunk/
mm
Hi again
You can get plugin code from the MP plugin repository. IRSS is -->here<--.
SourceForge.net Repository - [mp-plugins]...
'ello
Where can i get the current source code for IRSS?
Thanx
Hein
'ello
I'm having a hell of a time trying to Learn my IR codes for reliable blasting of my settop box. If I hold the number button down while learning, IRSS will sometimes blast a digit twice resulting in an invalid channel. I have found that rapidly tapping the button I'm trying to learn gives the best result, but that results...
'ello
I'm having a hell of a time trying to Learn my IR codes for reliable blasting of my settop box. If I hold the number button...
'ello
I'm having a hell of a time trying to Learn my IR codes for reliable blasting of my settop box. If I hold the number button...
Oke, that is something.. always was running it on next to each other. So basicly i dont need to start imon at all when i launch windows? Its only needs to be installed, without running?
Will check it later on! Tnx in advanced already!
Oke, that is something.. always was running it on next to each other. So basicly i dont need to start imon at all when i launch...
After a few evenings of trying it totally give up on this case/problem. It seems that some things are not ment to work on this HTPC...
Hi folks,
At first: Nice Work, I love this Tool. Especially blast commands to my receiver, tv.
Now i switch to a new MC-PC with Windows 7 64x. There is a nice feature with powersheduler++ to bring Windows in awaymode. In this case i want to switch off/on the receiver/tv if windows switch to this mode or back. Is there any way to...
Hi folks,
At first: Nice Work, I love this Tool. Especially blast commands to my receiver, tv.
Now i switch to a new MC-PC...
Hi folks,
At first: Nice Work, I love this Tool. Especially blast commands to my receiver, tv.
Now i switch to a new MC-PC...
I have similar issue with MCE blasting and fixed it by adding pause (250-500 ms) before blast command.
I can post screenshots this evening, if it help.
I have similar issue with MCE blasting and fixed it by adding pause (250-500 ms) before blast command.
I can post screenshots...
Hi,
Im using the MCE receiver / blaster and are trying to send an ir blast to my yamaha receiver....
I have setup up the...
AW: Device ?
ok, it seems that IRSS dont run with serial ir-receiver :(
perhaps you can add this "device".
I must then continue to torment with girder and WinLIRC
regard
AW: Device ?
ok, it seems that IRSS dont run with serial ir-receiver :(
perhaps you can add this "device".
I must then continue...
hello,
i will try this plugin but i dont know which device is correct....
i use this tool here:
Infrarot-Empfnger mit...
Does is crash even if you don't use it for 5 min or more ?
If you use only MCE receiver does it work ? It's not clear for your posts.
BTW, if you have more log would be interesting to check if the behavior is always the same.
Simone
Does is crash even if you don't use it for 5 min or more ?
If you use only MCE receiver does it work ? It's not clear for your...
Hi,
Irss v 1.4.2.4290
MP v1.1.3
Blaster USBUIRT Port_3
Receiver MCE
After installation of new version of irss which solves...