instead of the 4400+ i would take a x3 be-2300 or 2350. instead of 65w they have a tdp of 45w. i dont know the clockspeeds from memory but dispite from the number an heat these cpus should be the same (if there is a difference then it is no more than 200mhz).
instead of the 4400+ i would take a x3 be-2300 or 2350. instead of 65w they have a tdp of 45w. i dont know the clockspeeds from...
Ok, I am upgrading my current HTPC to a more modern and power/heat friendly version.
Currently im using my old left over ATX AMD...
I think the CPU idle power usage is the very important if you are building a HTPC that will be on 24/7, You can calculate te money that you save each year when you buy a low power CPU and then compare the two versions. Not making a decision based on only the price in the store...
I agree with you if you where talking about power...
I think the CPU idle power usage is the very important if you are building a HTPC that will be on 24/7, You can calculate te money...
Have a look at this: 25W Athlon 260u shipping in Europe - Processors - Fudzilla
Note that the Intel IvyBridge CPU model numbers with '5' at the end e.g. i3-3225 have the higher performance HD4000 GPU (16 EU instead of 6 EU) - this is worth having if you are going to use only the integrated GPU.
Note that the Intel IvyBridge CPU model numbers with '5' at the end e.g. i3-3225 have the higher performance HD4000 GPU (16 EU...
Hi everyone,
I'm wanting some advice on a good HTPC rig.
Basically I want a really stable setup - it doesn't have to be super...
Thanks guys, I'm glad I asked now. The board is the Asus M4A785TD-M EVO, and it does indeed have ATI onboard graphics (Radeon HD 4200), so that's something I'll have to look into. Don't plan on doing much encoding on that machine. I do want to upscale SD video/DVDs and TV channels though. I also just saw that ffdshow has a new...
Thanks guys, I'm glad I asked now. The board is the Asus M4A785TD-M EVO, and it does indeed have ATI onboard graphics (Radeon HD...
Hi folks, simple question - which is better for MP use, more cores or more clock speed? I currently have a socket AM2 Athlon 2.6GHz...
Depends on what processor you;re using and what you want to play. There's not a lot of discussion around about the 785G and MP because its so new, but there was a lot of talk about the 780g and its need for a fairly hefty processor in order to play 1080i. If you're not playing 1080i then maybe no need for the HD4550, however I dont...
Depends on what processor you;re using and what you want to play. There's not a lot of discussion around about the 785G and MP...
Well after 6 months of using my MediaPortal HTPC. My old Dell died. It was a Dell Optiplex GX280
The machine started getting a...
I have a Asus MB with Nvidia. I would be happy to trade for an ATI. I am not sure what "reframe greater then 4" means but many folks are running HD with MP and ATI
I have a Asus MB with Nvidia. I would be happy to trade for an ATI. I am not sure what "reframe greater then 4" means but many...
At the moment my HTPC has a ASUS Motherboard with AMD CPU.
The Motherboard does not have a PCIe slot, so i can not by a new NVIDIA...
Hi again Kris
As much as I hate to say it, you *might* have a faulty card there. Having said that, not all motherboards support x1 cards in x16 slots even though the standard says it should work - personal experience talking there. I wouldn't set the PCIe slot width to x1 - I would leave that at default. I'd also update to the latest...
Hi again Kris
As much as I hate to say it, you *might* have a faulty card there. Having said that, not all motherboards support x1...
Hi everybody! First time poster, long time visitor. I recently decided to build a HTPC. Specs as follows:
Mobo: BIOSTAR A880G+...
Finally getting around to write the review…
Hardware purchased to a total price of $461.94 (Breakdown below)
ASROCK J3710 – ITX Mini ITX Motherboard - $179
Samsung 120GB 750 EVO SATA SSD - $69
Antec ISK 110 VESA Case $105
Corsair 8GB DDR3 1600SO-DIMM Laptop Memory $55
Shipping/Other Costs $55.94
Build Notes/Thoughts...
Finally getting around to write the review…
Hardware purchased to a total price of $461.94 (Breakdown below)
ASROCK J3710 – ITX...
I am looking for new MP Client as my existing Client starting from way back with MP version 0.9 has finally powered off for the...
This is no comparission becuase you're comparing a non overclocked Q96xx to a overclocked Q6600. The 96xx can also be overclocked.... which then surpasses your overclocked q6600
Besides that the q6600 is 65nm based, the Q9xxx series is 45nm based, for the last one compared to the first, this means more overclocking headroom, less heat...
This is no comparission becuase you're comparing a non overclocked Q96xx to a overclocked Q6600. The 96xx can also be...
I am having a hard time choosing amongst these two processors.:bitch:
The reasons the E8500 is compelling are Cost, Power (65w)...
Thanks for that info guys... nice to get some recommended brand names to start looking at.
Thanks for that info guys... nice to get some recommended brand names to start looking at.
Hi all,
Sorry if this question has been done to death... but about 3 years ago I started out messing around with MediaPortal and...
Hello thanks for your info, actually i have the server Just as TV server, but never had the oportunity to work with 6 client at the same time, so now for a "game" we are going to use with some friends.
Thank you again.
Hello thanks for your info, actually i have the server Just as TV server, but never had the oportunity to work with 6 client at the...
Hi all, I would like to know the minnimun requirements to have a server for 6 clients.
Actually I have a Intel P4 Core 2 duo, 2...
Hmmm, not being rude, but the mobo (being cheap as in inexpensive) has proven itself to be quite reliable and stable with a decent overclock.
Hmmm, not being rude, but the mobo (being cheap as in inexpensive) has proven itself to be quite reliable and stable with a decent...
Hey guys, I got lucky and bought an opteron 150 (2.4ghz, 1mb cache) for a fraction of its price (85$ US).
Now, I started...
Yes renethx has done a fantastic job with that thread and has kept it pretty much meticulously up to date. He even takes the time to answer specific questions you have for him too on top of all of that. My last 2 HTPC's have been based off of his advice. Great guy right there.
Yes renethx has done a fantastic job with that thread and has kept it pretty much meticulously up to date. He even takes the time...
This is definitely a must read guide.
Guide to Building a HD HTPC - AVS Forum
Do you mean the MSI RS482M-IL? Where are you located?
In North America there are a couple models available:
http://www.newegg.com/Product/Product.asp?Item=N82E16813130526
http://www.newegg.com/Product/Product.asp?Item=N82E16813130520
Do you mean the MSI RS482M-IL? Where are you located?
In North America there are a couple models available...
Been reading for a couple weeks and wanted to get your thoughts on selecting a motherboard for a HTPC.
The role of the HTPC will...
AW: Re: New CPU + MB + PSU + RAM
I update to i5-2500K with onboard Grafik - works well in all resolutions 720P and 1080i
AW: Re: New CPU + MB + PSU + RAM
I update to i5-2500K with onboard Grafik - works well in all resolutions 720P and 1080i
Hello all,
It has been a while since I had any problems with my HTPC.
Unfortunately, my HTPC started a month ago with...
Thanks! Exactly what I needed....
Thanks! Exactly what I needed....
I've got an ASUS A8N32-SLI Deluxe Mobo with a 2.1GHz cpu and 3Gb Ram. It has 2 Lan connectors. Currently, I'm using only one...
Just remember guys, if you get the A8N-VM CSM you have to get the optional PCI riser card. The case is provided with an AGP/PCI riser, but the motherboard doesn't have an AGP slot!!!!
Just remember guys, if you get the A8N-VM CSM you have to get the optional PCI riser card. The case is provided with an AGP/PCI...
Can this mobo do in a HTPC? I'm thinking about graphics/audio
Case:Silverstone LC04.
Any sugest for speed of CPU, it must run...
AW: Does AM3 CPU work on a AM2+ motherboard?
Hi,
it is always good to consult the manual or vendor provided CPU compatibility list.
GA-MA78GM-S2H (rev.1.0) - GIGABYTE - Support&Download - Motherboard - CPU Support List
AMD Athlon II X4 600e appears to be listed. Check the BIOS version.
AW: Does AM3 CPU work on a AM2+ motherboard?
Hi,
it is always good to consult the manual or vendor provided CPU compatibility...
I've got a Gigabyte MA-78GM-S2H (AM2+ Mainboard) and I'd like to upgrade my dualcore processor to a quadcore.
I'd prefer a 45W...
Yes, I'll try and change the default.
Unfortunately my processor does not accept HDMI which is why I am anxious to get this working.
Thank you for your thoughts.
Yes, I'll try and change the default.
Unfortunately my processor does not accept HDMI which is why I am anxious to get this...
Help!
I am trying to get SPDIF passthrough working with my external processor and am not having any luck with DTS although 5.1...
Thanks ;) I already did the upgrade, old MB and Memory to be my new NAS / server machine. Not a waste in any case. More or less things work good now, I can watch HD on the server/tv combo while using clients at the same time. Now I have capacity to spare in the system :) Kinda costly TV solution, but much more fun than a black box I...
Thanks ;) I already did the upgrade, old MB and Memory to be my new NAS / server machine. Not a waste in any case. More or less...
Hello, I am upgrading my HTPC server to a new mobo, cpu and GPU card. I want it to perform well so I can use it as a TV-server +...
AW: Re: I need a new small but capable client setup?
definately!
I am running MP on a eeeBox1501 (see specs below) with absolutely no problems....
AW: Re: I need a new small but capable client setup?
definately!
I am running MP on a eeeBox1501 (see specs below) with...
I'm moving to a bigger place in a few weeks and want to replace my current single seat m-atx setup to a multi seat one. What I'm...
Went with an ivy bridge 3240 instead. This also allowed me to upgrade to the 1600Mhz ddr3 memory :)
Went with an ivy bridge 3240 instead. This also allowed me to upgrade to the 1600Mhz ddr3 memory :)
Will be used for storage, TV server (recording, timeshifting etc) and streaming for 2 or 3 clients...
Core i3 2120
Asrock B75M-GL...
Hi,
If i was going to do it again I probably would get something more powerful the ATOM ION (thats what I have now). At the end of the day if you get a 45w CPU your system will never use much more power then an ATOM ION because you will never be hitting 100% CPU.
AMD for sure but to save power use a PICO PSU (150watt) with a dell...
Hi,
If i was going to do it again I probably would get something more powerful the ATOM ION (thats what I have now). At the end of...
Hi!
I am unable to decide which setup should I chose, please help me decide. I am aware of many pros and cons for both, but for...
No...
I will be going optical out from the mobo to the optical in on the amplifier.... hdmi out from the mobo to the tv
No...
I will be going optical out from the mobo to the optical in on the amplifier.... hdmi out from the mobo to the tv
Hi all,
I ended up buying the nmedia 2000b with the optional LED and am very pleased with it
http://www.nmediapc.com/htpc2000.htm...
tnx,
I'll take a look
Bye
tnx,
I'll take a look
Bye
Hi,
I'm planning to build a new HTPC, to couple with my brand new TV, Samsung LE 46A756.
I'm in doubt on the motherboard and...
Hello rsbrux,
yes, you're right, but Radeon HD's DXVA will be enough for me. The tuner card is expensive, so I can not buy a separate VGA card too.
Right now I have to build a new desktop PC, so I won't have money for this HTPC now...
I'm still reading tests and reviews about these HW components. If I ever be able to build this, I...
Hello rsbrux,
yes, you're right, but Radeon HD's DXVA will be enough for me. The tuner card is expensive, so I can not buy a...
Hello everyone,
I looked at many threads, but I hardly found all of my answers for my questions.
I would like to set up my first...
What are you going to do for input? You'll need an encoder card to pull in at least one video signal. And with a lower end CPU like that you will need something with hardware encoding like a PVR-150.
I started out like you with an older P4 2.4GHz machine. I knew I needed to spend the money on the encoder card($90). But once I...
What are you going to do for input? You'll need an encoder card to pull in at least one video signal. And with a lower end CPU...
I'm trying to build a media center with the old computer parts that I have, but I still need a decent CPU, and I don't know if my...
AW: My odyssey to 5.1 digital surround sound
Hello WhiteNinja,
You're right. However these offers were rare (I remember scanning ebay during a month or so) and then they cost the same or even more than the new bracket from ASUS.
In fact this was my planned fallback solution, should my DIY not work.
Have a good time...
AW: My odyssey to 5.1 digital surround sound
Hello WhiteNinja,
You're right. However these offers were rare (I remember...
Hello all,
I wanted to report from my odyssey and hope that it helps someone.
The target: Enjoy digital 5.1 surround sound...
I realize this is an old message your sever may be ready by now ;)
I'm just finalizing the build of my new TV- & Media- server. I'm using an MSI P45 Neo3 - FR motherboard. It has 8 SATA ports, 4 PCI ports and gigabit ethernet. It also has on board RAID. I'm very happy with it.
VdR
I realize this is an old message your sever may be ready by now ;)
I'm just finalizing the build of my new TV- & Media- server...
Hi guys,
Looking for a little advice,
I am looking to build a Server to distribute my media around my house aswell as being a...
Do you have multiple monitors? Even if you don't, ATI CCC might have you set up just in case. Disable the 2nd monitor and you should be good to go.
Do you have multiple monitors? Even if you don't, ATI CCC might have you set up just in case. Disable the 2nd monitor and you...
Hello,
I have a PC configuration with:
- Motherboard: M4A785TD EVO-M
- Processor: Athlon IIX2 250
- Memory: 3 Gb...