If a button (or any control for that matter) is disabled is it possible to have an alternate control selected? The problem I'm having is two buttons below a list control - a prev button and next button. The next button is usually enabled and is set to be the next control from the listbox above and the buttons to the left. But if...
If a button (or any control for that matter) is disabled is it possible to have an alternate control selected? The problem I'm...
If a button (or any control for that matter) is disabled is it possible to have an alternate control selected? The problem I'm...
Thanx
gemx: It was freely translated from Danish, but it is the manu in mediaportal where plugins by default goes to.
Patric: That seems to be the solution, thanx :-)
br
Michael
Thanx
gemx: It was freely translated from Danish, but it is the manu in mediaportal where plugins by default goes to.
Patric...
Hi All
I have a process plugin, but users are complaining that it shows a menu item in the My Modules menu, but i have no clue...
Hello all,
First off, just wanted to say THANKS to everyone who works on and supports this project? I could not have imagined better program for HTPC's than MP! So I just 'upgraded' to 0.2.3.0 RC1, and I'm having the following problem:
For some reason, when I set up My Programs with, say, Project 64, I can go into the setup, do...
Hello all,
First off, just wanted to say THANKS to everyone who works on and supports this project? I could not have imagined...
Hello all,
First off, just wanted to say THANKS to everyone who works on and supports this project? I could not have imagined...
Hi,
The source it's on SVN now & for mediaportal source it is "https://mediaportal.svn.sourceforge.net/svnroot/mediaportal/trunk/mediaportal"
Regards
Roy
Hi,
The source it's on SVN now & for mediaportal source it is...
I am quite new to Media Portal, but I really like it very much. I'd like to develop a plugin and started with the tutorial...
Hi,
I'm playing with the OSD for VLC. See my screenshot. Has somebody else already tried something with it ? Is it possible to have text as well instead of icons ?
Quick test for everybody:
In the VLC dir I ececute
"vlc whaterver.mpg --extraintf rc --sub-filter osdmenu --osdmenu-file=osdmenu/dvd.cfg"
and the in the vlc window I...
Hi,
I'm playing with the OSD for VLC. See my screenshot. Has somebody else already tried something with it ? Is it possible to...
Hi,
I'm playing with the OSD for VLC. See my screenshot. Has somebody else already tried something with it ? Is it possible to...
Hey,
I just wanted to say thanks too... I had the same initial problem after upgrading to the 0.2.3RC1 candidate version. MyBlaster just stopped working. I followed the instructions and am now channel changing happily again using the MCE replacement plugin. It's an impressive piece of work, thanks again to and-81, also Spragleknas...
Hey,
I just wanted to say thanks too... I had the same initial problem after upgrading to the 0.2.3RC1 candidate version...
Hi all,
Since updating to MP 0.2.3.0 RC1, Myblaster no longer works. I can train blaster.exe and test OK, but as soon as I close...
Hi @all!
Hope it ist the right place for my post. I have a small problem with the dreambox plugin. If I try to change the channel or the group, the video window (VLC) is always above the text i try to choose. Is their any chance to change it??
cu
Hi @all!
Hope it ist the right place for my post. I have a small problem with the dreambox plugin. If I try to change the...
Hi @all!
Hope it ist the right place for my post. I have a small problem with the dreambox plugin. If I try to change the...
is it possible to use .lnk instead of .exe as far as the program is concerned? I use Total Game Control and with it I can make shortcuts to where when they are opened, it changes the TGC profile to whatever I have selected for it. As such, it requires the .lnk file (so it can modify target) instead of the .exe file.
I tried to insert...
is it possible to use .lnk instead of .exe as far as the program is concerned? I use Total Game Control and with it I can make...
is it possible to use .lnk instead of .exe as far as the program is concerned? I use Total Game Control and with it I can make...
Hello all.
I'm a MP n00b so be nice! :)
I have a question:
Is there a way to automatically create torrents from recordings made from MP? If not, there should be, because that would greatly help me.
And no, I would not use it for anything illegal, I just want to be able to share County Council meetings with people who don't get...
Hello all.
I'm a MP n00b so be nice! :)
I have a question:
Is there a way to automatically create torrents from recordings made...
Hello all.
I'm a MP n00b so be nice! :)
I have a question:
Is there a way to automatically create torrents from recordings made...
The advantage of using WCF is that communication can be quite a bit more efficient. Unfortunately, this will only work from another WCF client, a web service client would be slower again. But as you talk about ASP.NET obviously this would mean the transfer will will be fast! :)
And let's not forget that the data needs to be...
The advantage of using WCF is that communication can be quite a bit more efficient. Unfortunately, this will only work from...
Framework for the new webinterface
Good evening out there. I'm very happy with MP, but the actual Webinterface is not as perfect...
I recently wrote a plugin that will start MediaPortal on a specific screen and would allow MP to be moved between screens while running. This plugin uses the same technique as dhannema's mp_start program.
Just before writing this post I noticed that there has been work done that adds the possibility to choose which screen MP will...
I recently wrote a plugin that will start MediaPortal on a specific screen and would allow MP to be moved between screens while...
I recently wrote a plugin that will start MediaPortal on a specific screen and would allow MP to be moved between screens while...
mbuzina,
that's about what Inker suggested in the IRC, but I honjestly do not feel fit enough, to implement my own control from the source.
I will try (if this ever gets accomplished) to make this thing as "skinnable" as possible.
for further information on what I am trying to make, watch the "experience kaleidescape video" HERE...
mbuzina,
that's about what Inker suggested in the IRC, but I honjestly do not feel fit enough, to implement my own control from...
Hi,
so I made the PluginsTutorial and it works just fine.
But now I want to create a dynamic thumbnailpanel (those of you, who...
Heres the english version!
$x = $CmdLine[1]
Run("C:\Program Files\Project64 1.6\Project64.exe")
WinWait("Project64 Version 1.6","")
If Not WinActive("Project64 Version 1.6","") Then WinActivate("Project64 Version 1.6","")
WinWaitActive("Project64 Version 1.6","")
Send("{CTRLDOWN}o{CTRLUP}")
WinWait("Open","")
If Not...
Heres the english version!
$x = $CmdLine[1]
Run("C:\Program Files\Project64 1.6\Project64.exe")
WinWait("Project64 Version...
First let me say that my english is not very goode, but i find when i talk in english its better, because all peaple can understand...
I have successfully setup a Linksys NSLU2 with a Hauppauge WinTV PVR USB2 and am able to stream TV in MPEG2 format over UDP to my MediaPortal server at a constant bitrate of up to 27 Mbps.
I'd like to use this setup in MediaPortal as a TV source and plan to develop a "tuner" plugin for this aproach. Could someone please point me at...
I have successfully setup a Linksys NSLU2 with a Hauppauge WinTV PVR USB2 and am able to stream TV in MPEG2 format over UDP to my...
I have successfully setup a Linksys NSLU2 with a Hauppauge WinTV PVR USB2 and am able to stream TV in MPEG2 format over UDP to my...
Could anyone possibly give me the equivalence to this in Visual Basic?
[SkinControlAttribute(1)] protected GUILabelControl lblText = null;
I have read and read on MSDN and have been unable to figure out how to call and specify a specific skin control. I realize that C# is preferred, but I'm trying to start off easy. Thanks in...
Could anyone possibly give me the equivalence to this in Visual Basic?
[SkinControlAttribute(1)] protected GUILabelControl...
Could anyone possibly give me the equivalence to this in Visual Basic?
[SkinControlAttribute(1)] protected GUILabelControl...
Things that I like are: MyWebBrowser, MyFileExplorer, Uitzendinggemist.nl, MyMail, Skype, Traffic.nl, Rom emulators, Webguide, Msn Messenger....
I am not sure that used all the correct names :D
Things that I like are: MyWebBrowser, MyFileExplorer, Uitzendinggemist.nl, MyMail, Skype, Traffic.nl, Rom emulators, Webguide, Msn...
Hello Everybody,
For the moment I am still a Vista mediacenter user :) , but perhaps I want to use Mediaportal in the future :D...
As I have mentioned earlier in this thread I'm quite busy redoing my house, which takes a lot of time. I would love to have more time to update the plug-in, but it's just not possible at the moment. I hope to get more time by the fall. Then I'll try to expand the plug-in to include more countries and maybe streaming video too. I have...
As I have mentioned earlier in this thread I'm quite busy redoing my house, which takes a lot of time. I would love to have more...
I have made a plugin for you to browse your local theater for showtime and trailers.
This plugin is downloading movie...
It is a good idea i implement in next release, but a default skin needed to bee defined
After 0.2.3.0 final release this system will bee integrate in official site or a team supported site, but now must important is to release a stable MP
It is a good idea i implement in next release, but a default skin needed to bee defined
After 0.2.3.0 final release this system...
I try to localize the problem with MPInstaller.
Feel free to comment your choice.
:thx: