MediaPortal 1 Talk (77 Viewers)

General talk regarding our HTPC-software MediaPortal 1 takes place here.
Thanks again mm for the clarification. So that brings us back to the previous question: is it possible to change what fields are presented in the EPG display if it is imported from xmltv? Is there a plugin or something that can do it if it's not in the stock program?
Thanks again mm for the clarification. So that brings us back to the previous question: is it possible to change what fields are...
G'day! I'm from Australia and happily pull EPG data from the DVB signal. Is there a way to enhance that EPG data with some kind of...
Replies
16
Views
4K
Hi mm: I had a message on my main system from Windows Action Center that there had been a number of unexpected errors due to my video card...I use Radeon on everything. I downloaded new drivers, so we'll see what happens. I've done the same thing for my MP/HTPC, so hopefull that will address the unexpected restarts. Again...thanks...
Hi mm: I had a message on my main system from Windows Action Center that there had been a number of unexpected errors due to my...
I can't get my program guide data to update. I have tried the normal procedure of "forcing update when TV Service restarted". I...
Replies
7
Views
3K
Wonderful - I have just done that - thank you!
Wonderful - I have just done that - thank you!
Is it possible to set a recording on a channel by using a time from to? For instance there is a broadcast that is all afternoon...
Replies
2
Views
1K
FYI, I found a solution at this thread which avoids having to go manually through the home screen.
FYI, I found a solution at this thread which avoids having to go manually through the home screen.
Hi, Is it possible to allow a client HTPC to go to sleep when the TV connected to it is turned off? Scenario - TV and client are...
Replies
7
Views
2K
OK, thanks to Rick164's suggestion I looked out my version of TMT6 and installed it as a trial version on My Win 10 desktop PC. The install and initial startup went OK and it plays DVDs, however when I attempted to play a Bluray disk it came up with a fatal error (Unable to access the video overlay, update your video driver, or words...
OK, thanks to Rick164's suggestion I looked out my version of TMT6 and installed it as a trial version on My Win 10 desktop PC. The...
Can anyone confirm that Arcsoft's TMT 6 will work with Windows 10. Judging from Google it appears that opinion and experience is...
Replies
3
Views
4K
I'm in the same boat, I buy Now TV week passes for the F1 races that the BBC doesn't show, and at the moment just watch them in Firefox on my HTPC. There didn't seem to be a Now TV plugin for OnlineVideos unless I missed it. The big downside of Now TV of course is that you can't pause/rewind/record, so if there was a way to...
I'm in the same boat, I buy Now TV week passes for the F1 races that the BBC doesn't show, and at the moment just watch them in...
Hi, I live in the UK and have a MP server and mostly Kodi clients through the house. My son is turning into a big Formula 1 fan...
Replies
3
Views
5K
Hello None of the services you mentioned are going to be delivering MPEG 2 transport streams. Therefore they're not directly compatible. The only chance you'd have to integrate them into TV Server would be via something like this: https://forum.team-mediaportal.com/threads/vodserver-watch-internet-streams-as-tv-channels.121732/ Note...
Hello None of the services you mentioned are going to be delivering MPEG 2 transport streams. Therefore they're not directly...
Hi I've been using Media Portal as my Back end and Kodi as my front-end for my HTPC system. OTA TV works great! I'm interested in...
Replies
1
Views
3K
So I had initially installed MPExtended .5.4 and then upgraded it to .6 Beta hoping it would resolve the issue. Initially it didn't make any difference. But after a couple of hours it started working so now I'm able to skip around without issue.
So I had initially installed MPExtended .5.4 and then upgraded it to .6 Beta hoping it would resolve the issue. Initially it didn't...
I'm testing out media portal in conjunction with emby to watch recorded TV shows on my roku's. So far everything works pretty well...
Replies
1
Views
3K
No. Obviously there is a red dot inside MediaPortal, but there's no such indicator for the task bar.
No. Obviously there is a red dot inside MediaPortal, but there's no such indicator for the task bar.
In Win Media Center, if there was a program being recorded, there was a red dot that would show up as a notification in the task...
Replies
1
Views
890
There are design trade-offs with both approaches. This consequence seems very unlikely, especially if the download is handled properly (ie. in an asynchronous background thread with lowest possible priority). On the other hand, a certain consequence of having the plugin on the client side is that it must be installed and configured...
There are design trade-offs with both approaches. This consequence seems very unlikely, especially if the download is handled...
Hi a question, why are plugins like TV/radio logos made for clients and not for server?
Replies
5
Views
1K
MP1 MP2 UK Radio EPG DE
Ah, if I were still using MP TV Server I would happily have done so, but I now use Argus TV Server, with multiple MP1 clients. So I've not used WEBEPG for some time, and no system available to test. Sorry. EDIT: Looks like someone else has done it on the forum you linked to...
Ah, if I were still using MP TV Server I would happily have done so, but I now use Argus TV Server, with multiple MP1 clients. So...
Generally happy with my MediaPortal setup (UK Freeview and Freesat) now, but two things bug me about Radio support - can anyone...
Replies
7
Views
3K
Hi @Monkee erstmal herzlich Wilkkomen bei MediaPortal. Ich möchte dich bitten das Thema nochmals neu im deutschsprachigen Forum-Bereich zu erstellen - > Link. Dann benötigen wir noch mehr Infos über dein System und Logfiles solltest du bei Fehlern anhängen. Aber evtl. hilft dir ja dieser Thread schon weiter -> Link Gruß Helios
Hi @Monkee erstmal herzlich Wilkkomen bei MediaPortal. Ich möchte dich bitten das Thema nochmals neu im deutschsprachigen...
Hallo Experten, Habe Windos10(64). Wollte MP installieren und gleich so das damit auch fernsehen kann. Leider läßt sich dieser...
Replies
1
Views
791
It just means you have to search answer outside MediaPortal forum not that there is no answer.
It just means you have to search answer outside MediaPortal forum not that there is no answer.
Hi! Is there a guide anywhere that explains how to get OScam and Phoenix card reader to work with MediaPortal 1 or 2? I have a...
Replies
3
Views
5K
A year gone by and.... I gave a new shot for win 8.1 and had the same problem again... And the tool you suggested solved the problem :) the reveiver shows PCM 5.1 continuously (except during bitstreaming Dolby or DTS) and I have my GUI sounds!!! Thank you @megahorst
A year gone by and.... I gave a new shot for win 8.1 and had the same problem again... And the tool you suggested solved the...
Hi, my HTPC is currently runnig with Win 7. Because the Installation is very old, I think it is time Tod reinstall. What do you...
Replies
18
Views
4K
MP1 MP2 MP on Windows 10 DE
start screen configuration https://forum.team-mediaportal.com/threads/dynamic-refresh-rate-under-windows-10-ive-an-amd-video-card.132066/#post-1153082
start screen configuration...
Are you testing MP on the new build? If so, any luck or comments?
Replies
31
Views
11K
I have a dead OCZ also. I used that in my win7 Media centre. I too, now prefer Intel SSDs - I am using 2 in different PCs - 1 desktop and 1 laptop.
I have a dead OCZ also. I used that in my win7 Media centre. I too, now prefer Intel SSDs - I am using 2 in different PCs - 1...
Anyone with Digital Devices DVB-S tuners already running on Windows 10? I'm considering upgrading my main HTPC to Windows 10 since...
Replies
2
Views
2K
I happily confirm that multiple FloppyDTVs work just fine with MediaPortal under Windows 10 ! (y) Unfortunately I can't use Win10 as my main system just yet because of unrelated issues with my graphics card, but from a TV point of view everything went as smooth as possible. Changed the FireWire driver to the Legacy one for Windows...
I happily confirm that multiple FloppyDTVs work just fine with MediaPortal under Windows 10 ! (y) Unfortunately I can't use Win10...
Hi, I've looked high and low but can't seem to find anybody confirming that Digital Everywhere Floppy DTV (DVB-C) cards will work...
Replies
6
Views
5K
Actually after a few hours of working perfectly it just lost the connection for some reason. Sorry no logs.
Actually after a few hours of working perfectly it just lost the connection for some reason. Sorry no logs.
Just testing our latest MP1 master build (1.12.100) on a Windows 10 client connected to a Windows 7 server and HD TV works without...
Replies
1
Views
1K
Where have you been reading? If it is content in our forum/wiki we may be able to correct and clarify.
Where have you been reading? If it is content in our forum/wiki we may be able to correct and clarify.
Hello, I have searched everywhere and am unclear to the answer of this question. I have an InfiniTV 4 USB Tuner, TIme Warner...
Replies
3
Views
2K
Nice to know that about SD. Sounds like the MP database would need to keep track of the info from SD and the actual start and end time of the recording. Then a plug-in could mine the data looking for problems and reschedule accordingly. Cool. Thanks!
Nice to know that about SD. Sounds like the MP database would need to keep track of the info from SD and the actual start and end...
Good day! I scheduled a recording with Windows Media Center awhile ago. When I went to watch it, I noticed that the first 15...
Replies
8
Views
2K
I have an old PC with Intel Pentium D 820. Windows 7 x64 is successfully running on it. I wanted upgrade to win 10 and received an error message "CPU not supported". I googled a bit and found that starting with win 8 the CPU must support PAE, NX, and SSE2: http://windows.microsoft.com/en-us/windows-8/what-is-pae-nx-sse2 And in my case...
I have an old PC with Intel Pentium D 820. Windows 7 x64 is successfully running on it. I wanted upgrade to win 10 and received an...
Hi, There has been a lot of publicity surrounding Windows 10 lately and I am still reluctant to upgrade. Firstly, I am still very...
Replies
5
Views
1K
The MediaPortal project was founded by an XBMC founder who wanted TV support. He ("frodo") forked XBMC, and MediaPortal diverged from that point. My understanding is that NextPVR (formerly GB-PVR) has a completely independent development path. I'm not so sure about ARGUS (formerly ForTheRecord). My understanding is that the...
The MediaPortal project was founded by an XBMC founder who wanted TV support. He ("frodo") forked XBMC, and MediaPortal diverged...
Hi, all. From what I've seen, there are 3 popular TV Server engines: MediaPortal, NextPVR & ARGUS TV. Do any of these TV Server...
Replies
1
Views
1K
Awesome answer! Thanks!
Awesome answer! Thanks!
Hi, all. I've been wondering about this for a few months and thought I'd ask the question... My local ATSC PBS (Public...
Replies
2
Views
1K
Apologies for slotting in here, but as this is related to windows 10, can someone explain how to fix this annoying issue? https://forum.team-mediaportal.com/threads/anyone-know-how-to-fix-streamed-mp-colours.131731/#post-1148416
Apologies for slotting in here, but as this is related to windows 10, can someone explain how to fix this annoying issue...
Hi guys, So I thought I would upgrade my main machine to Windows 10 latest build. This evening I thought everything was all fine...
Replies
8
Views
2K
it is very handy, have used it in past on trial version but when that expired wasn't willing to pay £100 for the lifetime license they were asking last year, that has halved now but in my opinion they are marketing it wrong, i would have no problem paying a nominal amount for a years sub say £5, but lifetime things bug me incase they...
it is very handy, have used it in past on trial version but when that expired wasn't willing to pay £100 for the lifetime license...
This may come in handy for u guys :) http://www.dvdfab.cn/promotion.htm
Replies
2
Views
972
Check the automatic thumbnail creation setting..
Check the automatic thumbnail creation setting..
Hi guys Im having issue everytime i start MP and try to play any video (movie, tv show, video in any format) MP freezes. Sometimes...
Replies
1
Views
919
Bump: "Windows 10 IoT Core API Porting Tool Are the APIs that your current Win32 application or library depend on available in Windows 10 IoT Core? If not, are there equivalent APIs you can use? This tool can answer these questions for you and assist you in migrating your current Win32 applications and libraries to Windows IoT Core...
Bump: "Windows 10 IoT Core API Porting Tool Are the APIs that your current Win32 application or library depend on available in...
http://dev.windows.com/en-us/featured/raspberrypi2support I imagine this could be very interesting from a MediaPortal perspective...
Replies
10
Views
8K
MP1 MP2 Is MP destined to end like MeediOS? (1 Viewer) DE
No with real VT-D HW and ESXi you can passthrough PCIe cards to certain VMs. I would have gone that route but ESXi still has problems to raw passthrough HDD so I couldn't run ZFS. madm wouldn't have been an issue folks at OMV forum do it. So I had to use VDR instead.
No with real VT-D HW and ESXi you can passthrough PCIe cards to certain VMs. I would have gone that route but ESXi still has...
Hello I was using MP for few years, but over the last year, I'm using KODI, which is far better than MP in every aspect.. at this...
Replies
67
Views
17K
MP1 MP2 tv setup DE
Oh, then just click on the picture (or press the x key on your keyboard). You can also enable the option to automatically show full screen TV in MediaPortal Configuration in the TV subsection under TV/radio, as shown here...
Oh, then just click on the picture (or press the x key on your keyboard). You can also enable the option to automatically show...
is there a way that on selecting a tv station the resultant "picture" is always full size, rather than having to click on picture
Replies
3
Views
1K
I really love this "watch folder handbrake". It's great. But: some of my transcoded video files weren't running well. The issue I seemed to have: some transcoded video files had a frame rate of e.g. 24,2 Hz. The result: I had stuttering. In another thread in this awesome forum I posted my issue and someone helped me.I had to add a...
I really love this "watch folder handbrake". It's great. But: some of my transcoded video files weren't running well. The issue I...
Hi Guys, I use Handbrake to encode recorded files from .ts to .m4v. This can be a lengthy process to load each file into the...
Replies
8
Views
11K
Top Bottom