Hello datfreak
You've got all sorts of strange errors in your error log. There is no indication of what the problem might be.
I'd suggest two things:
1. Don't use the driver supplied by Windows. Use the driver from the tuner manufacturer.
2. Don't use "pause graph".
3. Use the same network provider ("preferred network provider")...
Hello datfreak
You've got all sorts of strange errors in your error log. There is no indication of what the problem might be.
I'd...
Hi fellow Mpers,
my system hw is the same but I just did a fresh install of windows 8(came from windows 7).
Now tv server sees the...
Can you try to stop the stream, wait 30 seconds, and then go to the next channel? There's a known bug which results in tuners not being freed for a while after the stream has been stopped.
You have to forward port 4322 in your router to the PC which runs the MPExtended service, and then configure your external address in aMPdroid...
Can you try to stop the stream, wait 30 seconds, and then go to the next channel? There's a known bug which results in tuners not...
HI, ive recently just installed mediaportal and im wanting to stream channels to my android device (Samsung S3) over the internet...
Hi Iggy64
Ask your qeustion at the mptagthat forum:
https://forum.team-mediaportal.com/forums/mptagthat.261/
To sign in see upper right corner.
There is also a wikipage for mptagthat:http://wiki.team-mediaportal.com/3_MPTagThat
Kind regards
Jean
Hi Iggy64
Ask your qeustion at the mptagthat forum:
https://forum.team-mediaportal.com/forums/mptagthat.261/
To sign in see...
Hello,
I am brand new to this forum. I don't see where to register, so I am trying to post an inquiry without registering. I...
Try scanning with source set to "cable".
Try scanning with source set to "cable".
Hello
I get this error when trying to use mediaportal with Hauppauge WinTV 885 Tuner.
Is the card really not supported or is it...
Hello and welcome Rob
Usually MP and TV Server are installed at the same time with the process described here:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/12_Installation/1_Deploy_Tool/0_Select_Options
- "yes, I will use MP to watch TV"
If you do an advanced installation then choose "single-seat" to get MP and TV Server on the...
Hello and welcome Rob
Usually MP and TV Server are installed at the same time with the process described here...
I just installed Media Portal and was looking at the forums and help sites and could not find a solution for this. I want to setup...
Install LAV set everything to LAV
Install LAV set everything to LAV
Just when I thought everything was running smoothly, while I was fine-tuning various settings for the tv, I realise I have lost the...
That's one of the things I miss most from WMC, the Genre Coloring and the Movie Guide. 1.3 is still in Alpha and would rather not risk messing up my setup until a stable version is released.
That's one of the things I miss most from WMC, the Genre Coloring and the Movie Guide. 1.3 is still in Alpha and would rather not...
Hello to all!
First off, I have perused this forum quite extensively, and I'm here to ask the remaining of my questions.
I'm...
Logs attached
This happened yesterday evening, sometime around 7:30 - 9 pm I think.
Logs attached
This happened yesterday evening, sometime around 7:30 - 9 pm I think.
Is there a setting to resume a recording after a power loss? My computer is set to turn back on after power loss, however I noticed...
Yes I do.
Yes I do.
I use Mediaportal for playing back my recordings (recorded with DVBViewer) and other videofiles. In other words i don't use...
I just noticed your PSU is 300watts, I'd recommend you to look at the following cheap + lower power (wattage) video cards, All these video cards don't need an auxillary pci-e power cable, which is important as you probably wont have this feature on your PSU.
ATI HD4670 (2nd hand)
ATI HD5450 (2nd hand)
ATI HD6450 (brand new or 2nd...
I just noticed your PSU is 300watts, I'd recommend you to look at the following cheap + lower power (wattage) video cards, All...
Hello I'm new to this TV media portal and I live in orlando,fl. 32801 USA. I read where I'm supposed open up Team media portal...
Thank you. There was no space left in my recording drive. Just wish MediaPortal would pop up some kind of message when this sort of thing happens. It would really save time when troubleshooting.
Thank you. There was no space left in my recording drive. Just wish MediaPortal would pop up some kind of message when this sort of...
Woke up this morning and turned on one of the clients. I kept getting can't connect to TV Server error. I thought I was having...
I let the scan go all the way through on ATSC and it picked up a lot of channels. Now to setup the guide and netflix plugin. Thanks for the info. Loving this program already.
I let the scan go all the way through on ATSC and it picked up a lot of channels. Now to setup the guide and netflix plugin. Thanks...
I am new to Media Portal. I have a Hauppauge WinTV HVR-2250, created two hybrid groups (hybrid 1 [Analog1 + Atsc 1]) and (hybrid 2...
HTPC -->receiver --> TV via HDMI. Receiver (Onkyo TX-SR608) is set to put video "through" although there are different conversion settings in the receiver. I've played around with different settings on it and the tv and the onboard Intel graphics settings. I know it seems like such a minor thing, but I get so worked up about every...
HTPC -->receiver --> TV via HDMI. Receiver (Onkyo TX-SR608) is set to put video "through" although there are different conversion...
I have an Insignia 42" 720p Plasma TV, model NS-42P650A11. My user guide, and the device manager on the computer, recommends the...
Hi tommyc2k7,
Thanks for your answer ... my MB ony has one slot (PCIe 1x) - no way to move the card ... ;)
At the weekend i will give 4tr - now argus-tv because 4tr is dead .. - a try.
or ... back to where i´m from - Linux and VDR (plus xbmc) ...
Michael
Hi tommyc2k7,
Thanks for your answer ... my MB ony has one slot (PCIe 1x) - no way to move the card ... ;)
At the weekend i...
Hi all,
I recently installed Mediaportal 1.2.3 to go with my Blackgold 3540 (dual dvb-s dual dvb-t) and I'm having problems...
Hi Chris.
Last question 1st - skin has no real impact on catalog of content - for movies, recommend MovingPictures for Movies & MP TVSeries for TV collections. How easy it is to catalog with both plugins depends on your naming conventions - see Wiki & Forum for specific help as and when needed. Songs - don't have much music...
Hi Chris.
Last question 1st - skin has no real impact on catalog of content - for movies, recommend MovingPictures for Movies &...
I just installed Media Portal on a Windows 8 HP Desktop. I have downloaded the new Avalon skin, but I cannot seem to get it to...
N.M.
N.M.
Hi All. I'm currently using WMC7 but I hate that often movies have a really low volume when playing in WMC7 and there doesn't seem...
Don't upgrade that pc, it will still give you problems with MP even if upgrading. You'd be better off saving for a new htpc from scratch.
Your best bet is to use XBMC, preferably the linux version. There is a linux bootcd version of xbmc, called "xbmcuntu" you can download + try from their website, it will run much better than MP...
Don't upgrade that pc, it will still give you problems with MP even if upgrading. You'd be better off saving for a new htpc from...
I have on older PC (single core, 2 meg ram) that I would live to use to watch videos recorded from my WMC7 main system.
I have...
OK have just found them in PROGRAM DATA Directory.
OK have just found them in PROGRAM DATA Directory.
I have just installed Mediaportal but can't scan for channels on Caradon Hill.
Under PROGRAM FILES/TEAM MEDIAPORTAL/MEDIAPORTAL...
PC wise you install it on that PC too. videos / music etc are all configured locally but for TV there is one server that all clients connect to.
There is no mac support (MP needs .NET).
There are a couple of things around this (DNLA, web-streaming etc) but the above is the out the box situation
PC wise you install it on that PC too. videos / music etc are all configured locally but for TV there is one server that all...
How do I access the MP from another PC/Mac on the LAN if installed on a central PC (Windows 7)?
Sorry......
Hello,
I try to use the mediaportal as a simple game startup selector. On the computer I will use there is no other multimedia content installed and wished.
It shall start not with the multimedia Content Menu but with a available game list which can be started like the game explorer of windows but with own content from a txt list and...
Hello,
I try to use the mediaportal as a simple game startup selector. On the computer I will use there is no other multimedia...
Hello,
I try to use the mediaportal as a simple game startup selector. On the computer I will use there is no other multimedia...
Hi
I have a tv tuner connected to my computer. Mediaportal recognizes my tv tuner. i have a set top box from comcast. How do I see the comcast channels on mediaportal?
Hi
I have a tv tuner connected to my computer. Mediaportal recognizes my tv tuner. i have a set top box from comcast. How do I...
Hi
I have a tv tuner connected to my computer. Mediaportal recognizes my tv tuner. i have a set top box from comcast. How do I...
Title says it all, just installed MP, looks so much better then wmc (<-hate it)
but even tho everything works in wmc, no card is showing up in the tv-server configuration tool.
can anyone pls help?
Title says it all, just installed MP, looks so much better then wmc (<-hate it)
but even tho everything works in wmc, no card is...
Title says it all, just installed MP, looks so much better then wmc (<-hate it)
but even tho everything works in wmc, no card is...
Becky,
Just to give you an idea about the performance you actually need for an average HTPC running MediaPortal, my HTPC is a 3-year old Dell Vostro 200 (slimline) with an Intel E4400 (2.2GHz dual-core) CPU, 4GB of RAM, nVidia GT430 video card and 2.5" 250GB drive + 3.5" 2TB 'green' drive. This will happily record 3 x HDTV channels...
Becky,
Just to give you an idea about the performance you actually need for an average HTPC running MediaPortal, my HTPC is a...
Hello,
Would someone mind reviewing what I'm thinking of purchasing for my first PVR system? I found what I think is a good deal...
uninstalled all MP on pc and re installed it> works now
uninstalled all MP on pc and re installed it> works now
mediaportal will not start on start up or manually. A message appears saying
Any ideas would be greatfull, cheers
Also...
some skinds expect ~L.jpg as well so for
Babar - 30.2 Qubo - 2012-09-12.ts
you should create
Babar - 30.2 Qubo - 2012-09-12.jpg & Babar - 30.2 Qubo - 2012-09-12L.jpg
some skinds expect ~L.jpg as well so for
Babar - 30.2 Qubo - 2012-09-12.ts
you should create
Babar - 30.2 Qubo - 2012-09-12.jpg &...
From the wiki:
So I added my custom thumbnail for 2 shows. Caillou and Babar. Named Caillou.jpg and Babar.jpg inside my...
Help!
Ran into some deeper issues after attaching an external hard drive (its now removed), computer really didnt like it and for some reason changed the boot sequence and wouldnt boot up. Fixed this but Media Portal not working like it was, suffering from continual crashing and errors coming up all over the place, info service...
Help!
Ran into some deeper issues after attaching an external hard drive (its now removed), computer really didnt like it and for...
Getting so much pleasure out of Media Portal. However very occasionally, perhaps once a fortnight the TV Server crashes and trying...
Ah, thats great! I never saw the difference between dynamic and non dynamic - just empty and not empty :-)
This works almost perfect. Now to decide wether or not to add these two categories to streamedmp basic home and figure out how to separate fanart backdrop. It would be nice eye candy to separate them completely on basic home so...
Ah, thats great! I never saw the difference between dynamic and non dynamic - just empty and not empty :-)
This works almost...
Okay I'm not sure if I should post this in the newcomers section or the plugins section. Here goes. I need to be able to filter my...
For some reason Task Scheduler wasn't running the .bat properly. Even clicking on Run Now wouldn't work. But I did manage to get it working using PowerScheduler++. In case someone runs into this issue.
This is what my .bat file looks like:
c:
cd "\MediaWah\Files\mc2xmlMP"
mc2xml.exe -o tvguide.xml
And this is how I configured...
For some reason Task Scheduler wasn't running the .bat properly. Even clicking on Run Now wouldn't work. But I did manage to get it...
How can I have the EPG update automatically. I'm using XMLTv plugin along with mc2xml. I wrote a batch file that runs every night...
OK, so I spent the weekend fiddling with MP1.2 ... actually, it took all of 5 minutes - apparently, the views as set out in the default MP1.2 installation simply didn't work for me. As soon as I modified them to conform to the examples in HomeY's link...
OK, so I spent the weekend fiddling with MP1.2 ... actually, it took all of 5 minutes - apparently, the views as set out in the...
After settling MP's TV Series and Moving Picture plugins to the way I like them (almost), I thought I'd turn my sight to my music...