I have same problem, And I need to clear uninstall and install MP1.1 again. But I found TV server config make a lot of trouble still pending on it. but MP for play movie is OK.
I have same problem, And I need to clear uninstall and install MP1.1 again. But I found TV server config make a lot of trouble...
The option to Upgrade to 1.1.0 from 1.0.2 is not available to me during installation. It is greyed out. Only fresh install is...
nope, TS only.
In the olden days, the olt TV recording engine used the same libraries as MCE so recordings were in DVR-MS, which is a pain as you had to mess about with them to get things to read them.
Then when the TV engine was introduced, there was the option of .ts or .mpg. However, there were problems with the conversion...
nope, TS only.
In the olden days, the olt TV recording engine used the same libraries as MCE so recordings were in DVR-MS, which...
Hi,
In the Recordings section of TV Server it defaults to record to .ts files, can you change this to DVRMS?
Dave
AW: New skins not showing up in MP config.
@kiwjunglist + catavolt: I guess the TS has a 4:3 resolution as he tried to install 4:3 skins...
BorisTheSpider: If I'm right then you should go for aMPed. But you have to wait a (short) while as Dadeo is currently busy launching version 3.2 compatible with MP1.1...
AW: New skins not showing up in MP config.
@kiwjunglist + catavolt: I guess the TS has a 4:3 resolution as he tried to install 4:3...
I just installed MP 1.1.0 and I'm trying to add a couple of different skins (PM3sexy43 & Blue3 Retro 2.28.82). I downloaded the...
Strangely enough I can't see your "My system" :S
Got this from logs, and post it so other can see as well:
System Information
------------------
Time of this report: 9/4/2010, 22:58:49
Machine name: ENTERTAINMENT
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.100427-1636)...
Strangely enough I can't see your "My system" :S
Got this from logs, and post it so other can see as well:
System Information...
Thanks in advance for any and all help.
I installed MP along with a Hauppauge WinTV-HVR 1600. I can watch and record with the...
Hi,
If I do a EPG grab during timeshifting/recording, I do not see any stuttering while watching TV. CPU goes to 100% load for a much longer time but without any noticeable side effects.
I guess this would be a temp solution until I have upgraded my CPU. Grabbing EPG at idle does have my preferences because I like to...
Hi,
If I do a EPG grab during timeshifting/recording, I do not see any stuttering while watching TV. CPU goes to 100% load for a...
Hi,
I have the TVserver and client installed on one PC. When I have " EPG grabbing while idle" enabled at the TVserver settings...
That's what I have in my setup. Works great! Of course you will need the schedules direct plugin.
Chuck
That's what I have in my setup. Works great! Of course you will need the schedules direct plugin.
Chuck
Can I use Schedules Direct with the HdHomerun and atsc channels?
Hello,
I had some random MP issues and decided to do a full uninstall and start fresh.
Now if i choose to view movies in "Film Strip" view and go back to the Home menu, the choice resets again, whereas before it stayed in Film Strip view.
Is there a magical setting or do i have to resort to reinstalling my OS?
Or, could view/layout...
Hello,
I had some random MP issues and decided to do a full uninstall and start fresh.
Now if i choose to view movies in "Film...
Hello,
I had some random MP issues and decided to do a full uninstall and start fresh.
Now if i choose to view movies in "Film...
exactly what i was looking for...thanks a lot
exactly what i was looking for...thanks a lot
I want to have TV-functionality on my laptop but i dont want to stick a tv-card in it. I want to install a tv-server and a client...
AW: Channel program Info
Ah, you mean the EPG! Go into TVServer Config and set up the EPG Grabber and the channels to be grabbed. -> DVB EPG. I recommend to activate EPG grabbing while idle, but you may also activate EPG grabbing while timeshifting, but this MAY give stutter on LiveTV if you system is a bit weak..
In the submenu TV...
AW: Channel program Info
Ah, you mean the EPG! Go into TVServer Config and set up the EPG Grabber and the channels to be grabbed...
Hello again...
I already asked for the channel logos, but i don't get the information like in this picture...
OK, thank's for the quick help, that problem is "fixed" ;)
:thx:
5L3DG3
OK, thank's for the quick help, that problem is "fixed" ;)
:thx:
5L3DG3
Hi first,
I'm new and i looked a bit around in the wiki and found the following link
TVChannelLogos - MediaPortal Manual...
- Locked
AW: no TV option
:D
AW: no TV option
:D
I just installed MP and ran the config. I am not getting any option for TV, I get everything else music,video etc. I am using a...
Hi
After recently geting a new system, I've since returned to using the excellent MediaPortal. i've been able to play HD rips fine in almost all case.
I'm having two problems.
Some HD rips play fine for the first few seconds (sometimes up to a minutes depending on the movie) and then the video suddenly freezes while audio...
Hi
After recently geting a new system, I've since returned to using the excellent MediaPortal. i've been able to play HD rips...
Hi
After recently geting a new system, I've since returned to using the excellent MediaPortal. i've been able to play HD rips...
- Locked
CATAVOLT ...OFC ...
I have NOT figured out why i couldn't play 50% of the files after i moved them to my new server, but after i installed MP 1.1.0.0 ifound a button in TV-Server Configure under recordings that was called change Channel , i just "Asigned" them to another channel in my MP ...and now they are working
CATAVOLT ...OFC ...
I have NOT figured out why i couldn't play 50% of the files after i moved them to my new server, but after i...
I have moved my recorded TV from harddisk in my HTPC (windows XP SP3 Media Portal 1.0.2.0) to unRAID serversolution
BUT
now when...
redirects
zap2xml
mc2xml
redirects
zap2xml
mc2xml
Hi,
I am a newcomer to MediaPortal and I was struggling to find a good US based EPG grabber. WebEpg simply did not work for me...
Glad that it worked out for you. Now you might consider replacing windows media center for mp tv server and client on you other machine so that you would be able to watch live tv streams from your old pc :)
Glad that it worked out for you. Now you might consider replacing windows media center for mp tv server and client on you other...
Hello everyone,
I just leared about MP and was really excited about it until I read the hardware requirements. I am running a...
When you go to Recorded TV menu, and you highlight a particular recording then it should give episode or program details that you want. These are shown at the bottom of the screen. e.g. you might have 5 seinfeld episodes of the same name in the same folder. You highlight the first one and it gives you some episode specific information.
When you go to Recorded TV menu, and you highlight a particular recording then it should give episode or program details that you...
Is there a way to label recordings so you can tell them apart?
For instance "The Tonight Show" or "Braves vs Yankees" ?
You're doing better than I am. I can't get it to find Tosh.0 or Tosh from thetvdb
You're doing better than I am. I can't get it to find Tosh.0 or Tosh from thetvdb
I am trying to import a bunch of TOSH.0 episodes into MP-TV (I am using the streamedmp skin) and I see it recognizes Tosh.O but, it...
Good job.
Good job.
Hi,
I have set up the TV server but the channel Seven block of digital channels were not identified.
there were a few unknown...
Not receiving any TV channels. Running the latest version of MediaPortal under Windows XP, SP3 and using an ATI TV Wonder 600 USB which works fine on other computers using Windows Media Center.
Not receiving any TV channels. Running the latest version of MediaPortal under Windows XP, SP3 and using an ATI TV Wonder 600 USB...
Not receiving any TV channels. Running the latest version of MediaPortal under Windows XP, SP3 and using an ATI TV Wonder 600 USB...
I use MC2XML.
The problem with WebEPG is that they rely on a screen scraping to generate the guide.
The issue with this is that when there is a significant change to the HTML source then the scraper code must be modified.
Also here in the USA there are numerous different localized TV guides that must be scraped from different...
I use MC2XML.
The problem with WebEPG is that they rely on a screen scraping to generate the guide.
The issue with this is that...
I'm a complete newbie user and am not sure a PVR is really possible, but that said, I have MP installed on my laptop and see and...
AFAIK, yes Comskip is the way to go. Comskip: How to? (single-seat and server/client)
AFAIK, yes Comskip is the way to go. Comskip: How to? (single-seat and server/client)
After I trashed my OS fooling around with Mythbuntu in back of my Windows xp. I reinstalled everything and got MP working well.Now...
Hi,
I have been using mediaportal for a couple of years now and use Moving Pictures to watch my movies.
I recently migrated all my DVD's to an external NAS. I have all my shares setup and everything works ok. I have mapped network drives using SMB.
Unfortunately since the migration I am having buffering issues. This is not...
Hi,
I have been using mediaportal for a couple of years now and use Moving Pictures to watch my movies.
I recently migrated...
Hi,
I have been using mediaportal for a couple of years now and use Moving Pictures to watch my movies.
I recently migrated...
I have had a few requests on how I set up Harmony H655 remote, iMON and media portal.
I made a quick document and it can be found at Harmony, iMON, Mediaportal config
Hope it is understandable and helps
Peter
G0RSQ
I have had a few requests on how I set up Harmony H655 remote, iMON and media portal.
I made a quick document and it can be...
Hi, I have a Logitech Harmony 525 remote loaded to MCE remote. I am running WinXP SP3 with a Antec Fusion v2 minidisplay and MP...
#5 Essdiem .... THX alot, it worked like a charm
#5 Essdiem .... THX alot, it worked like a charm
Another new installation and things f&*#up AGAIN.
Clean installation of the new MP (1.1.0.0) on a brand new PC
When i would...
Well maybe I spoke too soon.
The Remote is giving a problem
I have tried to find a remote XP Media centre but cannot find one on the Net.
I run XP Home SP3
So I followed a post from Posso to change the profiles.ini file in remoterm sub directory of Pinnacle.
But in the mediaportal configuration I cannot find the "correct" remote...
Well maybe I spoke too soon.
The Remote is giving a problem
I have tried to find a remote XP Media centre but cannot find one on...
I use:
AMD Sempron 3000
with Windows XP (Family) SP3
1.5Go RAM
ATI Radeon HD3450
Pinnacle PCTV 310i Pal
I have installed...
Correct. I am able to watch TV in MP with my WinTV-HVR-950Q
I started with a clean machine, downloaded the latest drivers and WinTV application (when you install WinTV i think it requires the original CD).
Also, in TV Server Configuration, i am unable to preview channels. i get sound but no video.
i only have the option...
Correct. I am able to watch TV in MP with my WinTV-HVR-950Q
I started with a clean machine, downloaded the latest drivers and...
Does TV Server work for anyone?
I don't understand why I can't find any channels but media center and every other program works...
Thanks for the answer.
It was indeed the folder.jpg.
Many :thx: :thx::D
Thanks for the answer.
It was indeed the folder.jpg.
Many :thx: :thx::D
Hello there,
I have a question about coverart mp3. I used to have no id3 tag information in my mp3 files. When i added new...
i installed PDVD8 ...when i try to play a Blu-Ray ...it tells me it needed to be updatet, then i update ...but it keep asking for update ....i have not installed any FFDShow ....is that nessesarry ?
i installed PDVD8 ...when i try to play a Blu-Ray ...it tells me it needed to be updatet, then i update ...but it keep asking for...
ONE Quick question before i start clean install of RC4 (Running V. 1.0.2 now)
I have installed WIN7 32 bit on my machine
So now...
thanks for the quick reply
can you please give me more information?
1) how do I do this?
2) how i will show 6 different MP to my TV's
3) what remote control should I use?
thanks
thanks for the quick reply
can you please give me more information?
1) how do I do this?
2) how i will show 6 different MP...
hello,
is there a way to have media portal work on several tv's over LAN ?
am looking a solution for 5-6 rooms with 1 server...
Hi. I'm new to Media Portal and I've just set up tv viewing which works great but I can't seem to get the over-air epg that comes with the broadcast. I tried changing some of the epg setting but no luck. Can anyone explain what I'm doing wrong?
Never mind. It just started working for some reason.
Hi. I'm new to Media Portal and I've just set up tv viewing which works great but I can't seem to get the over-air epg that comes...
Hi. I'm new to Media Portal and I've just set up tv viewing which works great but I can't seem to get the over-air epg that comes...