Hi, I have no feedback on CI's as I don't need them.
My opinion about PCIe is, yes do it if you can, will release the burden on any other PCI device you have on your PCI bus.
Video Decoding is done at client, not server, I have no codecs or MP client installed on my server.
I have 3 MP Clients thru out the house, with 1 server...
Hi, I have no feedback on CI's as I don't need them.
My opinion about PCIe is, yes do it if you can, will release the burden on...
I am planning setting up a server for TV reception and file serving in my house. My LAN at home is 1 GBit/s. The MP client...
Greetings community,
since I am new here, I would first like to say hello to everyone and how much I appceciate this project.
I set up a new PC with Windows Vista (yes I know, not the best of operating system, but I have a legal copy) and installed the following software on top:
- Videolan VLC 1.1.3
- MediaPortal 1.1.0
I...
Greetings community,
since I am new here, I would first like to say hello to everyone and how much I appceciate this project...
Greetings community,
since I am new here, I would first like to say hello to everyone and how much I appceciate this project...
I have over the month or so installed Mediaportal. The only issue i am having is that I cannot get The X-Files to be recognised by the Tv Series plugin. All my other Tv Series have been recognised without fault. The Tvdb site does not have the series so I believe that's where the issue arises from.
I have used Metabrowser...
I have over the month or so installed Mediaportal. The only issue i am having is that I cannot get The X-Files to be recognised by...
I have over the month or so installed Mediaportal. The only issue i am having is that I cannot get The X-Files to be recognised by...
Hi alank!
Thank you for your patience.
I became convinced that my installation was flawed. I uninstalled all components, read the manual (again), downloaded again, and installed again. Now, can get MP to load and I can even navigate some of the menus, but I can never seem to get out of the pages I land on except by ending the...
Hi alank!
Thank you for your patience.
I became convinced that my installation was flawed. I uninstalled all components, read...
Hello All!
This forum looks like the place I need. I hope you can help me.
I want to use my laptop - HP core duo with 2GB...
I can't even get the card to find channels in MP, so I haven't managed to fix anything. I don't know why MP can' find my channels!! Looks like the card "times out" while searching.
I can't even get the card to find channels in MP, so I haven't managed to fix anything. I don't know why MP can' find my channels...
Hi!
AFAIK MediaPortal does support "TerraTec Cinergy C HD & CI", in other words; MP supports TerraTecs CI.
Again, AFAIK to...
Hi,
I don't think that a different skin will resolve the problem. However, updating to Vista or Windows7 should help, so I would go down this path first.
Mark
Hi,
I don't think that a different skin will resolve the problem. However, updating to Vista or Windows7 should help, so I would...
Hello everybody,
I'm searching for a 4:3 skin for MP 1.1.0.0.
Actually I'm using AMPED 3.1, but I've got problems with it...
Ok,
if u are using EPG data from webEPG, try to change source to dagenstv.se (don' t remember the name).
I think the default source is svt.se, and that one is not always updating.
/tompa
ups, didn't see that...
then i should recommend u to switch to webEPG!
/tompa
Ok,
if u are using EPG data from webEPG, try to change source to dagenstv.se (don' t remember the name).
I think the default...
My attempts to remove our big old HDD-recorder has come to a stop as the EPG doesn't work on some channels. Ofcourse the most...
Hi, first i am new here. English is not my motherlanguage so i try my best.
I'd like to buld up a mediapc for my mom. So i prefered to use only one remote Controll.
So i dedusted my old Winlirc com reciever and learnd the buttons of the remotecontroll.
The problem is that the WinLIRC Plugin but everytime id like to configure the...
Hi, first i am new here. English is not my motherlanguage so i try my best.
I'd like to buld up a mediapc for my mom. So i...
Hi, first i am new here. English is not my motherlanguage so i try my best.
I'd like to buld up a mediapc for my mom. So i...
Sorry, I should play for longer before posting. In case anyone else has the issue, add .mod to the video formats in MP Config, simples!
Sorry, I should play for longer before posting. In case anyone else has the issue, add .mod to the video formats in MP Config, simples!
Does anyone know the simplest way to import videos from a JVC Everio camcorder?:thx:
Well I took a chance and bought the wireless setup. The keyboard and trackballs work great but the remote has very little functionality. Its trackball, OK button, and arrow keys work but none of the other buttons control MP. I can tell the buttons are sending signals because an LED on the USB receiver lights up.
I was looking at...
Well I took a chance and bought the wireless setup. The keyboard and trackballs work great but the remote has very little...
I'm looking at the possibility of using the NMediapc RKR760 radio based remote setup and I'm wondering if MediaPortal will work...
Thanks !
I went to the setup and changed sound codec, and now it works !!
My girlfriend can finally record her favorite soaps..... :thx:
Thanks !
I went to the setup and changed sound codec, and now it works !!
My girlfriend can finally record her favorite...
Some of the TV channels don't have any sound when viewed and recorded whinin MP. When I try the viewer included with the TV-card...
Not quite sure if this is the proper place to ask, but I'm trying to find who worked on HCWIRBlaster.cs because I'm trying to implement some of my own IR commands in a separate project and am running into some issues. I found the file here...
Not quite sure if this is the proper place to ask, but I'm trying to find who worked on HCWIRBlaster.cs because I'm trying to...
Not quite sure if this is the proper place to ask, but I'm trying to find who worked on HCWIRBlaster.cs because I'm trying to...
Hi.
Latest MediaPortal is 1.1.0 - not 1.0.1.
You should consider updating -> MEDIAPORTAL - free media center - MediaPortal Downloads
Hi.
Latest MediaPortal is 1.1.0 - not 1.0.1.
You should consider updating -> MEDIAPORTAL - free media center - MediaPortal Downloads
Hey guy's, ive been using Mediaportal for a fair while and never had no issue's, until now...
Im running Widows 7, the latest...
I had problems at first too. My problem (I think) was related to incorrect or badly-installed drivers. If you go to Hauppauge's website you can get the most up to date drivers, also there is a Hauppauge MCE encoder that you might have to install to get it working with MP.
I had tried so many different things (different drivers...
I had problems at first too. My problem (I think) was related to incorrect or badly-installed drivers. If you go to Hauppauge's...
Hi,
I recently decided to try out MP. I am trying to get TV to work with HVR-950q. It looks like i need an encoder.
I...
Need plugin for hearing/deaf people :
For hearing/Deaf people make an hardsub option to convert TS output files to hardsub video will be the Best !
Extraction/converting Teletext subtitles to SRT will be very useful too.
Why ?
Because TS files are not compatible with main TV-Player/Recorder ans Main software that allow...
Need plugin for hearing/deaf people :
For hearing/Deaf people make an hardsub option to convert TS output files to hardsub video...
Need plugin for hearing/deaf people :
For hearing/Deaf people make an hardsub option to convert TS output files to hardsub video...
For hearing people :
I test different kind of software that allow show subtitles, Media Portal is the best solution I found :
- Subtitles display in real time
- Subtitle record
- Open Source
- Free
- Output : standard format (TS) compatible with VLC, MediaPlayer, etc...
- Can manages "series" programms
And best of all ...
For hearing people :
I test different kind of software that allow show subtitles, Media Portal is the best solution I found :
-...
For hearing people :
I test different kind of software that allow show subtitles, Media Portal is the best solution I found :
-...
My Trailers plugin no longer lists game trailers
My Trailers plugin no longer lists game trailers
Hello all,
Just curious, I have the latest verison of MyTrailers but i can only see Apple trailers---
Is there anything else I...
Hi Wonkyd,
Didn't see the series option (man eyes) I'm feeling like a bit of a dipstick now :ooops: :thx:
Thanks
Graham
Hi Wonkyd,
Didn't see the series option (man eyes) I'm feeling like a bit of a dipstick now :ooops: :thx:
Thanks
Graham
Hi All,
Since installing V1.0.2 Final and setting the Recording folders for all TV Cards to F:\TVServer\Recordings, my...
Thanks for your suggestions.
I re-installed Media Portal, and had a quick try out of purevisionHD, and it looks quite good, certainly do what I wanted.
Struggling again to get it all working, so will go back to basics and get EPG and remote working reliably before looking further into these skins.
Thanks again for responses...
Thanks for your suggestions.
I re-installed Media Portal, and had a quick try out of purevisionHD, and it looks quite good...
Hi
I am now getting very dissolusioned with Windows Media center 7 and once again would like to give media portal a try (lots of...
I have never used ReClock but setting up my computers with MP 1.1 I'm looking for a complete setup but I have some questions regarding ReClock. From what I understand what it does is to make sure that you play back videos at the correct framerate be it 24fps, 23,976fps or something else, is that correct?
If so, who needs this? What...
I have never used ReClock but setting up my computers with MP 1.1 I'm looking for a complete setup but I have some questions...
I have never used ReClock but setting up my computers with MP 1.1 I'm looking for a complete setup but I have some questions...
I just finished installing Mediaportal on a new build PC. The PC will only be used to record TV when I am not at home so I can view it later. I get my TV signal from an antenna on my roof. I am running Windows 7. I cannot get Mediaportal to map my TV signal. It shows now channels. When I click map using the AverMeida dual TV...
I just finished installing Mediaportal on a new build PC. The PC will only be used to record TV when I am not at home so I can...
I just finished installing Mediaportal on a new build PC. The PC will only be used to record TV when I am not at home so I can...
Hi All,
The only issue I have around Powerscheduler now is the ability to force standby outside the hours between 5:00pm and 11:00pm which does not seem possible i.e. if I select 17:00 to 23:00 it gets confused because the times overlap into the next day.
Does anybody know a solution to this? It's a pitty there is not multiple time...
Hi All,
The only issue I have around Powerscheduler now is the ability to force standby outside the hours between 5:00pm and...
Hi All,
Since installing V 1.1.0 Final, Powerscheduler does not seem to put the machine into S3 sleep mode.
I have enabled...
I have just installed MP 1.1 and find it very good. However, I am trying to use a Netgear EVA2000 to replay recorded TV programs across my LAN. I find the following.
Recorded Std Def digital channels play back on MP, WMP, WME, VLC etc. just fine
Recorded Std Def digital channels also play through my Netgeard EVA200 juts fine...
I have just installed MP 1.1 and find it very good. However, I am trying to use a Netgear EVA2000 to replay recorded TV programs...
I have just installed MP 1.1 and find it very good. However, I am trying to use a Netgear EVA2000 to replay recorded TV programs...
Hi all, it's my first post in this forum and i want to thank evryone contributing this good program!
I resume this topic because i have the same problem of boriska00. I installed the latest ffdshow and set it in the MediaPortal Config-App renderer option, but i'm not still able to play any file :(
Using kmplayer or another external...
Hi all, it's my first post in this forum and i want to thank evryone contributing this good program!
I resume this topic because i...
Hello everyone.
Just installed MediaPortal on my old laptop to try it out.
From what I can tell, everything is installed...
oh u can try upgrade if you want to, bc u can upgrade any MP1.1 RC version to MP1.1 Final
why don't u backup mediaportal app data directory
try an upgrade
if problems then proceed to fresh install
oh u can try upgrade if you want to, bc u can upgrade any MP1.1 RC version to MP1.1 Final
why don't u backup mediaportal app data...
If I want to update my version of Mediaportal from an RC version of 1.1.0
to the final one...do i just install it?
or do I need...
True, just trying to keep it simple and not scare people off, especially when an update is eminent. It used to be you had to do some detective work to get the dlls and figure out where they were supposed to go.
---------------------------------------------------------------------------------------------------------
If you just...
True, just trying to keep it simple and not scare people off, especially when an update is eminent. It used to be you had to do...
Hi. I love Mediaportal, or 98% of it but in 1.0.0 recording a tv series was easy. You selected a program from the EPG, right...
Hi Tourrettes
Yep it's DVB-C and i'm using the Terratec Cinergy PCI DVB-C tuner. HTPC is running Windows XP.
/Nyll
Update: I have tested recording using Terratecs own Cinema application. The picture is still compressed on the horizontal axis. Result = MP is not to blame for this :-) MP is the best mediacenter software ever.
Hi Tourrettes
Yep it's DVB-C and i'm using the Terratec Cinergy PCI DVB-C tuner. HTPC is running Windows XP.
/Nyll
Update: I...
Hi. I have a problem with the aspect ratio on my tv recordings on MP tv-server.
When I play the files outside MP in VLC and...
thanks for your help!!!!!
thanks for your help!!!!!
i have alot of emulators(playstation 2,playstation,dreamcast,ect.) i just want to know if there is anyway to set up the
my...
I checked with the guy responsible for the digital tv net.
Finally all the frequencies was corrected. Thanks alot !
I checked with the guy responsible for the digital tv net.
Finally all the frequencies was corrected. Thanks alot !
I'm totally new to MP. Have a Dell Dimension 9150 with a Anysee E30C TV-card (DVB-C). which is BDA and MCE compatible. The viewer...
After installing the last version the HD-channels (CanalDigital) with symbolrate 30000 will not start. I got the following message: Can´t start graph. HD-channels with symbolrate less then 30000 works fine.
After installing the last version the HD-channels (CanalDigital) with symbolrate 30000 will not start. I got the following message...
After installing the last version the HD-channels (CanalDigital) with symbolrate 30000 will not start. I got the following message...