PureVisionHD 1080 DriveFreeSpace (2 Viewers)

catavolt

Design Group Manager
  • Team MediaPortal
  • August 13, 2007
    15,124
    12,058
    Königstein (Taunus)
    Home Country
    Germany Germany
    Here we go again :D
    I optimized skin and added a nice help text - be sure to read!
    As I said before you SHOULD activate drive C because of formatting of the skin.
    All other drives should be grouped automatically, not assigned drives show a respective message.
    Just copy the content of the attached ZIP into your PVHD folder (overwrite).
    Have fun!
     

    Attachments

    • DriveFreeSpace PureVisionHD 1080.zip
      79.6 KB

    framug

    Super Moderator
  • Team MediaPortal
  • January 31, 2005
    6,308
    2,489
    South of France
    Home Country
    France France
    • Thread starter
    • Moderator
    • #42
    Here we go again :D
    I optimized skin and added a nice help text - be sure to read!
    I read and do the same as displayed (text would be better than picture, for copy/paste) ;)

    As I said before you SHOULD activate drive C because of formatting of the skin.
    Yes, I read that but, I explain it and why in 3/ b)
    All other drives should be grouped automatically, not assigned drives show a respective message.
    Just copy the content of the attached ZIP into your PVHD folder (overwrite).
    Have fun!
    1/ The only C: checked :

    zz1.png

    2/ With E: checked, more than C: (please look at 2 times E: displayed)

    zz2.png

    3/ With your config :

    zz3.png

    a) rectangle can't contains all infos.
    b) Here is a problem : we already see that there is scroll for drives here BUT, you (and me) know that probably C: is not the drive where free space is critical.
    Then, before E: appears, others impatients users who will not wait scrolling could think OK, there are place in the disk, where it could not be the case...
     

    catavolt

    Design Group Manager
  • Team MediaPortal
  • August 13, 2007
    15,124
    12,058
    Königstein (Taunus)
    Home Country
    Germany Germany
    2/ With E: checked, more than C: (please look at 2 times E: displayed)
    Right - better I use the wording "This drive is not activated" ;)
    a) rectangle can't contains all infos.
    b) Here is a problem : we already see that there is scroll for drives here BUT, you (and me) know that probably C: is not the drive where free space is critical.
    Then, before E: appears, others impatients users who will not wait scrolling could think OK, there are place in the disk, where it could not be the case...
    a) unfortunately correct - have to think how adapt the size of that display ;)
    b) Scrolling starts per skin standard after 20 seconds - I´ll reduce that one for DFS to lets say 5 seconds
     

    framug

    Super Moderator
  • Team MediaPortal
  • January 31, 2005
    6,308
    2,489
    South of France
    Home Country
    France France
    • Thread starter
    • Moderator
    • #45
    a) unfortunately correct - have to think how adapt the size of that display ;)
    If a day, in "recorded" (wich is I think, more used than scheduled), would be great to adapt here too. ;)
    b) Scrolling starts per skin standard after 20 seconds - I´ll reduce that one for DFS to lets say 5 seconds
    Can be a solution or, completely avoid C: display.
    (My wife will never wait for 5 seconds). :D

    Also, if you have GFX ideas for DFS plugin enabled/disabled instead of default one, a bit like I made for FileExplorer, I'll take it

    Enabled :

    zz1.png

    Disabled :

    zz2.png
     

    High_Five

    Design Group
  • Team MediaPortal
  • February 10, 2023
    347
    1,434
    Home Country
    Germany Germany
    I used the configuration from my last post for a quick test with your latest settings_general.xml, where C:, D: and E: are fixed drives/partitions, F: and H: are USB sticks, G: is a virtual drive and I: is an optical drive.

    1. All drives are enabled, G: is probably the drive with 0% shown twice, H: is only shown as a red dot.

    Test mit allen LAufwerken aktiviert.png

    2. Drive D: is disabled, the last drive as a red dot is probably I:, the enabled optical drive.

    Test ohne D.png

    Regarding the layout, it might be easier to show in e.g. mytvrecordedtv.xml only the drives that are checked in the config of DriveFreeSpace and to present in Settings perhaps by means of menubutton all drives on several pages, where the physically not present drives are e.g. grayed out or marked differently.
     
    Last edited by a moderator:

    catavolt

    Design Group Manager
  • Team MediaPortal
  • August 13, 2007
    15,124
    12,058
    Königstein (Taunus)
    Home Country
    Germany Germany
    G: is a virtual drive and I: is an optical drive.
    Not sure whether DFS recognize those correctly ;) Therefore the glitches may appear ;)
    Sorry to edit your post but images in fullscreen consume to much space ...
     

    Users who are viewing this thread

    Similar threads

    MP1 MP2 EPG woes DE
    Thanks for your reply. I haven't forgotten about this. I have XMLTV mostly working, but MC2XML used to take care of two things that I have not yet accommodated. These are "New program indication" (for me, that was an asterisk "*" character in the program title) and "automatic time zone conversion". As I understand it, XMLTV is...
    Thanks for your reply. I haven't forgotten about this. I have XMLTV mostly working, but MC2XML used to take care of two things...
    Does anyone know how to “fix” the MC2XML application, and hopefully permanently? Mine stopped working sometime after September 29...
    Replies
    17
    Views
    3K
    MP1 MP2 IPTV struggle DE
    Hello nicholasclark, thank you for your reply. I was trying to get my Mum's MediaPortal TVPC up to date as the time has come to replace her television with a new "smart" TV. My though was not to get involved with the "Smart" TV, but get a dumb 4K LED Panel and run it from MediaPortal. Great to have a new TV with "The Smarts" but...
    Hello nicholasclark, thank you for your reply. I was trying to get my Mum's MediaPortal TVPC up to date as the time has come to...
    Good day folks. I am trying to get my Mediaportal 1 system connected to use IPTV and finding it a bit of a struggle. I do not know...
    Replies
    3
    Views
    320
    After many hours of troubleshooting I've given up and accepted that it's just "one of these things" when using madVR for watching live TV. I've now ticked the box to "Use EVR for LiveTV", with a default display refresh rate of 50Hz. In combination with tweaking some of the Nvidia 3D settings for the MP executable only, I now have a...
    After many hours of troubleshooting I've given up and accepted that it's just "one of these things" when using madVR for watching...
    Every so often, when I switch to a TV channel, my MP client stops accepting user inputs, either from the remote or keyboard/mouse...
    Replies
    30
    Views
    9K
    I have wanted to create a skin for MePo for years, but lack of free time due to other time demanding creative output (i.e. hobbies) I have not gotten past creating mockups of my skin ideas for when I could have time in the future. But, the future seems to be here now, with the AI explosion, good or bad. I've never tried using AI...
    I have wanted to create a skin for MePo for years, but lack of free time due to other time demanding creative output (i.e. hobbies)...
    I have wanted to create a skin for MePo for years, but lack of free time due to other time demanding creative output (i.e. hobbies)...
    Replies
    0
    Views
    504
    When I rebooted this morning, the same problem came back. But I did find my error, it turned out I had accidently clicked on "Filtering: On startup filter by: Unwatched Movies" in "Moving Pictures Configuration". Don't know how I did that. (n)
    When I rebooted this morning, the same problem came back. But I did find my error, it turned out I had accidently clicked on...
    About a 2 months ago I was having problems with filtering for unwatched movies. I couldn't find the filter for it. So I tried...
    Replies
    3
    Views
    795
    Top Bottom